基于Windows消息机制的人机交互的研究与应用

结合实例着重介绍了如何通过串行通讯利用Windows的消息机制来解决目前工业设备控制中人机交互的模拟问题,并对这两种技术进行了详细的论述.     

89C51实现光电经纬仪摄影机目标距离的显示

介绍一种以89C51为核心，通过AD和LED，实现光电经纬仪摄影机目标距离显示的方法。该方法提出了一些新的设计方案，从而使整个系统结构简单，运行可靠。     

Statistical analysis of sand grain/bed collision process recorded by high-speed digital camera

A high‐speed digital camera was employed to record the sand grain/bed collision process. With image processing and a statistical method, a series of parameters of the collision process were obtained. The results show that the collision process of a grain with rebounding can be represented by two parameters: the kinetic energy restitution coefficient and the collision angle. Both parameters satisfy a normal distribution, and they are dependent on one another. With an increase of the collision angle, the distribution of the kinetic energy restitution gradually reduces from a broad to a narrow range with low values. The percentage of vertical velocity restitution coefficients greater than 1 can reach 70% or more, which ensures that the settling time of the sand grains in the air increases and that they receive more energy from the air to progress the saltation movement.     

地形因素对航空面阵CCD影像的影响分析与评价

地形因素,包括地面起伏和地球曲率,是造成航空数字遥感影像变形的主要原因之一.本文以中国科学院遥感所自行研发的多模态航空CCD相机系统为对象,结合其成像模式和几何形态,分析了地形因素给影像带来的变形,推导出航空面阵CCD影像变形的一般公式,并通过概算进行了定量评价,得出了对于航空面阵CCD影像,要想得到高精度的几何处理,必须改正地球曲率影响的结论.     

非量测数码相机（哈苏H1D型）在南极项目生产中的应用

简要分析了非量测数码相机哈苏H1D在南极中山站及拉斯曼丘陵地区所获取的影像数据的几何精度,阐明了利用该影像数据进行空中三角测量,DLG,DOM制作的技术流程及作业过程中出现问题的处理方法。     

UCD数码相机影像在武汉测区的应用

针对UCD数码航空影像在摄影测量中的空中三角测量和数字测图进行了相关的生产试验。试验结果表明UCD数码航空影像具有较好的成图精度,可以满足大比例尺航测成图的精度指标。根据试验结果对UCD数码影像的生产应用提出了若干建议。     

Monitoring of Over Cutting Area and Lubrication Distribution in a Large Slurry Pipe Jacking Operation

Slurry pipe jacking was firmly established as a special method for the non-disruptive construction of the underground pipelines of sewage systems. Pipe jacking, in its traditional form, has occasionally been used for short railways, roads, rivers, and other projects. Basically the system involves the pushing or thrusting of concrete pipes into the ground by a number of jacks. In slurry pipe jacking, during the pushing process, mud slurry and lubricant are injected into the face and the over cutting area that is between the concrete pipes and the surrounding soil. Next, the slurry fills voids and the soil stabilizes due to the created slurry cake around the pipes. Fillings also reduce the jacking force or thrust during operation. When the drivage and pushing processes are finished, a mortar injection into the over cutting area is carried out in order to maintain permanent stability of the surrounding soil and the over cutting area. Successful lubrication around the pipes is extremely important in a large diameter slurry pipe jacking operation. Control of lubrication and gaps between pipes and soil can prevent hazards such as surface settlement and increases in thrust. Also, to find voids around the pipes after the jacking process, in order to inject mortar for permanent stabilizing, an investigation around the pipes is necessary. To meet these aims, this paper is concerned with the utilization of known methods such as the GPR (Ground Penetrating Radar) system and borehole camera to maintain control of the over cutting area and lubricant distribution around the pipes during a site investigation. From this point of view, experiments were carried out during a tunnel construction using one of the largest cases of slurry pipe jacking in Fujisawa city, Japan. The advantages and disadvantages of each system were clarified during the tests.     

高压铁芯串联电抗器烧损故障分析

分析了高压铁芯串联电抗器烧损的原因,进一步探讨了V-A特性对铁芯串联电抗器的影响,以及电抗率的选取.     

大型高速滑坡滑动过程中碰撞特性的试验

首次提出了滑坡岩体高速碰撞模型实验方法。通过实验,研究了滑体碰撞解体后不同速度段岩体体积的分布规律,得出了加速块体所占比例基本与滑体体积及碰撞速度无关,而个别块体获得的加速效应与滑坡体积及碰撞速度有明显的正相关关系。     

基于普通数码相机的影像匹配技术

论述了将全数字摄影测量应用于计算煤场煤堆体积的基本理论和方法。重点论述了普通数码相机影像匹配方法和数学模型，系统的物理模型在实验室内得以验证和实现。