Validation and Improvement of Satellite-Derived Surface Solar Radiation over the Northwestern Pacific Ocean

The purpose of this study is to validate and improve satellite-derived downward surface shortwave radiation (DSSR) over the northwestern Pacific Ocean using abundant in situ data. The DSSR derivation model used here assumes that the reduction of solar radiation by clouds is proportional to the product of satellite-measured albedo and a cloud attenuation coefficient. DSSR is calculated from Geostationary Meteorological Satellite-5/Visible Infrared Spin-Scan Radiometer data in 0.05° × 0.05° grids. The authors first compare the satellite DSSR derived with a cloud attenuation coefficient table determined in past research with in situ values. Although the hourly satellite DSSR agrees well with land in situ values in Japan, it has a bias of +13∼+34 W/m² over the ocean and the bias is especially large in the low latitudes. The authors then improve the coefficient table using the ocean in situ data. Usage of the new table successfully reduces the bias of the satellite DSSR over the ocean. The cloud attenuation coefficient for low-albedo cases over the ocean needs to be larger in the low latitudes than past research has indicated. Daily and hourly DSSR can be evaluated from the satellite data with RMS errors of 11–14% and 30–33%, respectively, over a wide region of the ocean by this model. It is also shown that the cloud attenuation coefficient over land needs to be smaller than over the ocean because the effect of the radiation reflected by the land surface cannot be ignored.     

黔北遵义团溪铝土矿勘探网密度探讨

以黔北遵义团溪铝土矿后槽矿区一矿块为例,用50m×50m工程间距进行施工成果与100m×50m和100m×100m工程间距施工成果,对其矿体厚度、矿体形态、主要化学成分含量及储量变化进行分析对比,以探寻此类矿床应如何选择工程间距,才能更合理准确地对矿体进行圈定控制,以满足矿山开采设计的要求。通过资料分析对比认为,对黔北喀斯特型沉积铝土矿进行勘查而言,以≤50m×50m工程间距控制矿体并求取储量,效果较为理想。     

Numerical Modelling of Dissolving and Driving Exploitation of Potash Salt in the Qarhan Playa——A Coupled Model of Reactive olute Transport and Chemical Equilibrium in a Multi-component Underground Brine System

Firstly, the macroscopic chemical equilibrium state of a series of chemical reactions between intercrystal brine and its media salt layer (salt deposit) in Qarhan Salt Lake was studied by using the Pitzer theory. The concept of macroscopic solubility product and its relation with accumulated ore dissolving ratio were presented, which are used in the numerical model of dissolving and driving exploitation of potassium salt in Qarhan Salt Lake. And secondly, with a model forming idea oftransport model for reacting solutes in the multi-component fresh groundwater system in porous media being a reference, a two-dimensional transport model coupled with a series of chemical reactions in a multi-component brine porous system (salt deposits) was developed by using the Pitzer theory.Meanwhile, the model was applied to model potassium/magnesium transport in Qarhan Salt Lake in order to study the transfer law of solid and liquid phases in the dissolving and driving process and to design the optimal injection/abstraction strategy for dissolving and capturing maximum Potassium/Magnesium in the mining of salt deposits in Qarhan Salt Lake.     

Numerical Modelling of Dissolving and Driving Exploitation of Potash Salt in the Qarhan Piaya——A Coupled Model of Reactive Solute Transport and Chemical Equilibrium in a Multi-component Underground Brine System

Firstly,the macroscopic chemical equilibrium state of a series of chemical reactions between intercrystal brine and its media salt layer (salt deposit) in Qarhan Salt Lake was studied by using the Pitzer theory.The concept of macroscopic solubility product and its relation with accumulated ore dissolving ratio were presented,which are used in the numerical model of dissolving and driving exploitation of potassium salt in Qarhan Salt Lake.And secondly,with a model forming idea of transport model for reacting solutes in the multi-component fresh groundwater system in porous media being a reference,a two-dimensional transport model coupled with a series of chemical reactions in a multi-component brine porous system (salt deposits) was developed by using the Pitzer theory. Meanwhile,the model was applied to model potassium/magnesium transport in Qarban Salt Lake in order to study the transfer law of solid and liquid phases in the dissolving and driving process and to design the optimal injection/abstraction strategy for dissolving and capturing maximum Potassium/ Magnesium in the mining of salt deposits in Qarban Salt Lake.     

1∶500,1∶1000,1∶2000系列数字化测绘产品的精度目标与实现

1∶500,1∶1000,1∶2000系列数字化测绘产品按其生产工艺和用途的不同其精度规格也不尽相同,但产品的精度状况始终是测绘生产部门与用户所关心的问题。本文列举了现行有关规范的相关精度指标、规格,并结合产品的用途、特点和测绘生产的实际,简要阐述精度目标的控制与实现过程,对测绘实际工作有一定的参考价值。     

西北旅游落后现状的突破及列车旅游的新思路--兼论"西部之星"旅游列车的产品设计

近几年，西北地区的旅游业虽然取得了很大的成绩，但其发展相对于东部地区却显得落后，其主要原因之一就是西北地区的旅游资源过于分散，景点间距过大，由此导致游览行程过长，游览内容单薄，这在客观上影响了游客的选择。而与此同时，在国外，列车旅游早已作为各国旅游业的重要旅游产品为世人所熟知。文章从分析我国西北旅游业发展的现状入手，针对景点分散这一制约我国西部旅游业发展的客观不利因素，肯定了开发旅游列车产品的思路。作者以西北地区为例，结合目前我国旅游专列发展现状，提出开通“西部之星”旅游列车的构想，并进行了初步的设计。     

NWP在颠簸预报中的应用

颠簸是航空气上重要预告内容之一，历史上由于颠簸引起的飞行事故及征候占有一定的比例，颠簸预报也是气象预报的难点，颠簸对飞行的影响至关重要，轻则引起航行中的飞机摆动偏航，重则造成飞机解体，近年来随着太原机场卫星广播传真数值预报产品的使用，我们也在逐步尝试使用数值产品分析颠簸，使颠簸的预报有了明显提高。     

Fitness-for-Purpose of Reference Material Reference Values in Relation to Traceability of Measurement, as Illustrated by USGS BCR-1, NIST SRM 610 and IAEA NBS28

As in all fields of sample analysis, reference materials play a large role in supporting measurements in the geosciences. While a rather large number of materials are in distribution (> 380), not all are equally effective or fit-for-purpose in supporting laboratory data quality and thereby assuring the desired comparability of measurements between laboratories. Equally important, reference values that are not fit-for-purpose cannot be used effectively to establish traceability links between laboratory measurements and national and international standards. The needed fitness-for-purpose is not achieved for reference values either when more than one reference value has been proposed and a consensus does not exist among users as to which should be used by all, or when reference value uncertainties are too large in comparison to those of routine laboratory measurements. The focus of this review will be, first to outline the current reality, and second to suggest ways in which certifications of RMs can be improved to provide reference values that are universally accepted and more fit-for-purpose in general laboratory use. The discussion will be illustrated largely by current uses of USGS BCR-1, NIST SRM 610 and IAEA NBS28, as these three materials are those for which the largest body of newly published data exists, according to recent bibliographies of the geoanalytical literature published annually in Geostandards Newsletter: The Journal of Geostandards and Geoanalysis.