基于RDBMS的积件技术的应用研究

积件技术是教学软件发展的方向，探讨了用Power Builder前台结合SQL Server关系数据库后台进行多媒体教学积件管理的应用模式，并结合具体教学示例，进行了分析说明。     

公用微机硬盘信息保护的一种有效方法

介绍一种保护公用微机硬盘信息的有效方法．不仅可以预防各种计算机病毒，更重要的是可以防止人为操作对硬盘信息的破坏。适用于学校等开放性微机实验室的信息安全与保护．     

A hierarchical real-time control architecture for a semi-autonomous underwater vehicle

This paper describes a real-time control architecture for Dual Use Semi-Autonomous Underwater Vehicle (DUSAUV), which has been developed at Korea Research Institute of Ships and Ocean Engineering (KRISO) for being a test-bed of development of underwater navigation and manipulator technologies. DUSAUV has three built-in computers, seven thrusters for six DOF motion control, one 4-function electric manipulator, one ballasting motor, built-in power source, and various sensors. A supervisor control system with GUI and a multi-purpose joystick is mounted on the surface vessel and communicates with vehicle through a fiber optic link. Furthermore, QNX, one of real-time operating system, is ported on the built-in control and navigation computers for real-time control purpose, while Microsoft OS product is ported in the supervisor computer for GUI programming convenience. A hierarchical control architecture, which consists of application layer, real-time layer and physical layer, has been developed for efficient control system of above complex underwater robotic system. The experimental results with implementation of the layered control architecture for various motion control of DUSAUV in an ocean engineering basin of KRISO is also presented.     

钻孔灌注桩施工对邻近运营隧道变形影响研究

桩基施工将引起周边地层位移和邻近隧道结构变形,以南京龙津桥改建项目桩基工程为背景,通过现场实测,分析研究钻孔灌注桩施工全过程各工况条件对地层位移场和邻近既有隧道结构变形的影响规律。结果表明:由于钢套管的护壁作用,钻孔灌注桩施工过程中产生的最大地层位移和隧道结构变形较小,说明采用“钢套管边旋压边取土”、“群桩间跳施工”等工艺,对周围土体扰动影响程度较小,建议近隧桩基工程采用全套管灌注桩的施工方法,监测分析结果可为类似工程提供技术参考。     

激光剥蚀等离子体质谱分析中激光剥蚀参数对信号响应的影响

探讨了激光剥蚀等离子体质谱固体微区分析中激光剥蚀参数对元素分析信号灵敏度及稳定性的影响。这些参数包括激光功率、脉冲频率、剥蚀孔经、散焦距离、剥蚀方式等。讨论了优化的激光剥蚀等离子体质谱信号采集及数据处理方式。在全质量范围内选用具有代表性的元素作为研究对象,建立了激光剥蚀的一般性特征规律和266nm紫外激光系统的最佳操作条件。在选定的激光剥蚀参数下,大多数被测元素的检出限为22.8~457ng/g,能够满足固体微区分析的要求。     

用Sufer7.0绘制气象等值线图

总结Surfer7.0的使用经验,并详细介绍了利用该软件绘制气象等值线图形的方法和过程。     

构造地质学计算机辅助教学课件SGCAI

构造地质学计算机辅助教学课件（ＳＧＣＡＩ）利用数据库，图形动画及多媒体等技术，对地质学基础课程的计算机辅助教学研究作了初步探索，课件分为学生学习，教师管理，附属功能和执行四大模块，具有学习选择，图片说明，动画演示，练习测验，辅导答题等十个功能，课件设计新颖，技术全面，使用方便，使用该课件能充分调动学生学习的主观能动性，使学生成为真正的学习主体，有助于提高教学质量。     

Coupled Dynamic Response Analysis of A Multi-Column Tension-Leg-Type Floating Wind Turbine

This paper presents a coupled dynamic response analysis of a multi-column tension-leg-type floating wind turbine (WindStar TLP system) under normal operation and parked conditions. Wind-only load cases, wave-only load cases and combined wind and wave load cases were analyzed separately for the WindStar TLP system to identify the dominant excitation loads. Comparisons between an NREL offshore 5-MW baseline wind turbine installed on land and the WindStar TLP system were performed. Statistics of selected response variables in specified design load cases (DLCs) were obtained and analyzed. It is found that the proposed WindStar TLP system has small dynamic responses to environmental loads and it thus has almost the same mean generator power output under operating conditions as the land-based system. The tension mooring system has a sufficient safety factor, and the minimum tendon tension is always positive in all selected DLCs. The ratio of ultimate load of the tower base fore-aft bending moment for the WindStar TLP system versus the land-based system can be as high as 1.9 in all of the DLCs considered. These results will help elucidate the dynamic characteristics of the proposed WindStar TLP system, identify the difference in load effect between it and land-based systems, and thus make relevant modifications to the initial design for the WindStar TLP system.     

DZJ2激光垂准仪使用方法及指标的校正

介绍了DZJ2激光垂准仪的性能及基本指标的校正方法,为用户在使用DZJ2激光垂准仪过程中几种基本指标参数的校正提供参考.