小直径组合桩的波浪力实验分析

本文给出小直径孤立桩、两个桩和2×2个桩的波浪作用力实验结果。在波浪水槽中以0°,45°,90°三个波浪方向测量了各桩所受的纵向力和横向力,文中讨论了组合桩之间的干扰效应,给出了干扰系数随KC数和桩距的变化。     

剔除高密度电阻率法三极装置浅部不均匀体效应影响的方法及效果

基于总结出的高密度电阻率法三极测量装置下的二维正演拟断面中浅部不均匀体畸变规律和特征,设计了一套能有效剔除三极测量装置浅部不均匀体效应影响的数据处理方法,成功应用于野外实测数据的处理。     

Mineral composition variation in Alpine Schist, Southern Alps, New Zealand: Implications for recrystallization and exhumation

Abstract Compositional variation of silicates (plagioclase, K-feldspar, epidote, titanite, garnet, white mica, biotite, chlorite), ilmenite, carbonates (calcite, ankerite) and apatite, in quartzofeldspathic lithologies of the Alpine Schist, New Zealand, is discussed in terms of increasing metamorphic grade and possible isograd-producing reactions. The mineral data, in conjunction with geological considerations, are used to determine polychronous P-T arrays of an early high P/T event (c. 16°C/kb; 5°C/km) overprinted by a lower P/T event (c. 50°C/kb; 15°C/km) that provides an estimation of Mesozoic and Cenozoic exhumation of schist of 11 to 13 km and 19 to 22 km respectively. The effects of possible shear heating and recrystallization to form K-feldspar zone schist near the Alpine Fault is consistent with movement along a mid to lower crustal detachment surface during Cenozoic shortening, and near isothermal exhumation of the schists to form the Southern Alps.     

Evolution of accelerographs, data processing, strong motion arrays and amplitude and spatial resolution in recording strong earthquake motion

This paper presents a review of the advances in strong motion recording since the early 1930s, based mostly on the experiences in the United States. A particular emphasis is placed on the amplitude and spatial resolution of recording, which both must be ‘adequate’ to capture the nature of strong earthquake ground motion and response of structures. The first strong motion accelerographs had optical recording system, dynamic range of about 50 dB and useful life longer than 30 years. Digital strong motion accelerographs started to become available in the late 1970s. Their dynamic range has been increasing progressively, and at present is about 135 dB. Most models have had useful life shorter than 5–10 years. One benefit from a high dynamic range is early trigger and anticipated ability to compute permanent displacements. Another benefit is higher sensitivity and hence a possibility to record smaller amplitude motions (aftershocks, smaller local earthquakes and distant large earthquakes), which would augment significantly the strong motion databases. The present trend of upgrading existing and adding new stations with high dynamic range accelerographs has lead to deployment of relatively small number of new stations (the new high dynamic range digital instruments are 2–3 times more expensive than the old analog instruments or new digital instruments with dynamic range of 60 dB or less). Consequently, the spatial resolution of recording, both of ground motion and structural response, has increased only slowly during the past 20 years, by at most a factor of two. A major (and necessary) future increase in the spatial resolution of recording will require orders of magnitude larger funding, for purchase of new instruments, their maintenance, and for data retrieval, processing, management and dissemination. This will become possible only with an order of magnitude cheaper and ‘maintenance-free’ strong motion accelerographs. In view of the rapid growth of computer technology this does not seem to be (and should not be) out of our reach.     

高密度电阻率法测量多排列数据拼接及误差校正方法研究

根据高密度电阻率法相邻二个排列之间有相当重叠部分这个特点,提出将高密度各个单一排列剖面连接在一起,组成一个多排列数据拼接一起并进行误差校正。为抑制相邻排列间数据系统误差影响,运用多排列数据拼接系统误差的校正方法,这是一种最小二乘准则下的计算方法。通过实际例子证明,该方法在解决多排列拼接过程中系统误差问题是十分可行、有效的。     

An effect of closure on the structure of principal components

The principal components transformation generates, from any data array, a new set of variables—the scores of the components—characterized by a total variance exactly equal to that of the initial set. It is in this sense that the transformed variables are said to contain, preserve, or account for, the variance of the original set. The scores, however, are uncorrelated. In the course of the transformation, what becomes of the strong interdependence of variance and covariance so characteristic of closed arrays? The question seems to have attracted little attention; we are aware of no study of it in the earth sciences. Experimental work reported here shows quite clearly that the overall equivalence of variance and covariance imposed by closure, though absent from the component scores,may emerge in relations between the coefficientsof each of the lower-order components; if the raw data are complete rock analyses, the sum of all the covariances of the coefficients of such a component is negative, and is very nearly equal to the sum of all the variances in absolute value. (In all cases so far examined, the absolute value of the first sum is a little less than that of the second.) The principal components transformation provides an elegant escape from closure correlation if a petrographic problem can be restated entirely in terms of component scores, but not if a physical interpretation of the component vectors is required.     

Shear stress partitioning in large patches of roughness in the atmospheric inertial sublayer

Drag partition measurements were made in the atmospheric inertial sublayer for six roughness configurations made up of solid elements in staggered arrays of different roughness densities. The roughness was in the form of a patch within a large open area and in the shape of an equilateral triangle with 60 m long sides. Measurements were obtained of the total shear stress (τ) acting on the surfaces, the surface shear stress on the ground between the elements (τ_S) and the drag force on the elements for each roughness array. The measurements indicated that τ_S quickly reduced near the leading edge of the roughness compared with τ, and a τ_S minimum occurs at a normalized distance (x/h, where h is element height) of (downwind of the roughness leading edge is negative), then recovers to a relatively stable value. The location of the minimum appears to scale with element height and not roughness density. The force on the elements decreases exponentially with normalized downwind distance and this rate of change scales with the roughness density, with the rate of change increasing as roughness density increases. Average τ_S : τ values for the six roughness surfaces scale predictably as a function of roughness density and in accordance with a shear stress partitioning model. The shear stress partitioning model performed very well in predicting the amount of surface shear stress, given knowledge of the stated input parameters for these patches of roughness. As the shear stress partitioning relationship within the roughness appears to come into equilibrium faster for smaller roughness element sizes it would also appear the shear stress partitioning model can be applied with confidence for smaller patches of smaller roughness elements than those used in this experiment.     

Prospects for far infrared arrays

We report initial performance measurements of a 1/8 scale version of a 32×32 pixel array under development for SIRTF. This array demonstrates that we can reach the sensitivity limits set by the natural backgrounds in space while providing good imaging and photometric performance. Based on the achieved performance levels, we project the imaging capabilities of SIRTF in the far infrared to exceed by a factor of more than 10,000 those achieved by any preceding telescope.     

APEX-SZ a Sunyaev–Zel’dovich galaxy cluster survey

The APEX-SZ experiment is a sky survey designed to discover galaxy clusters via the Sunyaev–Zel’dovich effect at millimeter wavelengths. We describe the components of the instrument, including the 12 m Atacama Pathfinder Experiment telescope, optics, Transition-edge sensor bolometer array and SQUID readout. APEX-SZ will begin observations in 2004.