A multiscale work-analysis approach for geotechnical structures

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.     

Consolidation of double‐layered ground with vertical drains

Vertical drains are usually installed in subsoil consisting of several layers. Due to the complex nature of the problem, over the past decades, the consolidation properties of multi‐layered ground with vertical drains have been analysed mainly by numerical methods. An analytical solution for consolidation of double‐layered ground with vertical drains under quasi‐equal strain condition is presented in this paper. The main steps for the computation procedure are listed. The convergence of the series solution is discussed. The comparisons between the results obtained by the present analytical method and the existing numerical solutions are described by figures. The orthogonal relation for the system of double‐layered ground with vertical drains is proven. Finally, some consolidation properties of double‐layered ground with vertical drains are analysed. Copyright © 2001 John Wiley & Sons, Ltd.     

Magnetic Reconnection, Turbulence, and Collisionless Shock

A short summary of recent progress in measuring and understanding turbulence during magnetic reconnection in laboratory plasmas is given. Magnetic reconnection is considered as a primary process to dissipate magnetic energy in laboratory and astrophysical plasmas. A central question concerns why the observed reconnection rates are much faster than predictions made by classical theories, such as the Sweet–Parker model based on MHD with classical Spitzer resistivity. Often, the local resistivity is conjectured to be enhanced by turbulence to accelerate reconnection rates either in the context of the Sweet–Parker model or by facilitating setup of the Pestchek model. Measurements at a dedicated laboratory experiment, called MRX or Magnetic Reconnection Experiment, have indicated existence of strong electromagnetic turbulence in current sheets undergoing fast reconnection. The origin of the turbulence has been identified as right-hand polarized whistler waves, propagating obliquely to the reconnecting field, with a phase velocity comparable to the relative drift velocity. These waves are consistent with an obliquely propagating electromagnetic lower-hybrid drift instability driven by drift speeds large compared to the Alfven speed in high-beta plasmas. Interestingly, this instability may explain electromagnetic turbulence also observed in collisionless shocks, which are common in energetic astrophysical phenomena.     

K-H Instability of Dust Plasma

Areview about K-H instability related to comet tail is presented.The effect of dust graing on KHI is theoretically analysed and relations of critical shear to excit KHI with the properties of dust grains both for sheared ion flow and for sheared dust flow re put out.Their possible application in comet tail is suggested.     

黑洞吸积盘的演化及温度分布的热不稳定性

本文在Ｔｈｏｒｎｅ工作的基础上讨论了吸积盘中黑洞的有关参量的演化，以及由Ｓｃｈｗａｒｚｓｃｈｉｌｄ黑洞吸积盘向Ｋｅｒｒ黑洞吸积盘演化过程中对吸积盘辐射通量的影响，最后针对几个典型的辐射过程，分别讨论了黑洞吸积盘在牛顿框架中的温度分布方程与广义相对论的温度分布方程的热不稳定性，并给出此类问题的热不稳定性的判据。     

非线性Rossby波所满足的三阶Zakharov方程与低频振荡

本文在基本气流具有水平切变的情况下,利用摄动法导出了非线性Rossby波所满足的三阶Zakharov方程,然后,考虑了基流具有弱切变的情况,通过使用三阶Zakharov方程研究了Rossby波列的第一类不稳定性问题。结果表明:通过非线性作用,大气中的Rossby波列可产生调制不稳定。同时,本文对这种不稳定的区域,增长率和周期进行了详细的计算,并讨论了波振幅、波数、纬度和基流切变对它们的影响,指出Rossby波列的调制不稳定可以激发30～60天的低频振荡。     

Numerical Stabilization of Orbital Motion

Mainly, the author focuses on Baumgarte's method and its applications in satellite, asteroid, stellar and planetary problems. In the paper arguments are given for the use of energy relations for stabilization in the elliptical two-body problem. Stabilizing properties of Baumgarte's equations and others are discussed. A simple approach is proposed for stabilizing the equations of almost circular motion. By using Baumgarte's technique, the author derives stabilized equations of perturbed restricted three-body problem. It is shown experimentally that stabilization in the problems mentioned above can raise the accuracy of numerical integration by several orders.     

Studying Hydrodynamic Instability Using Shock-Tube Experiments

The hydrodynamic instability, which develops on the contact surface between two fluids, has great importance in astrophysical phenomena such as the inhomogeneous density distribution following a supernova event. In this event acceleration waves pass across a material interface and initiate and enhance unstable conditions in which small perturbations grow dramatically. In the present study, an experimental technique aimed at investigating the above-mentioned hydrodynamic instability is presented. The experimental investigation is based on a shock-tube apparatus by which a shock wave is generated and initiates the instability that develops on the contact surface between two gases. The flexibility of the system enables one to vary the initial shape of the contact surface, the shock-wave Mach number, and the density ratio across the contact surface. Three selected sets of shock-tube experiments are presented in order to demonstrate the system capabilities: (1) large-initial amplitudes with low-Mach-number incident shock waves; (2) small-initial amplitudes with moderate-Mach-number incident shock waves; and (3) shock bubble interaction. In the large-amplitude experiments a reduction of the initial velocity with respect to the linear growth prediction was measured. The results were compared to those predicted by a vorticity-deposition model and to previous experiments with moderate- and high-Mach number incident shock waves that were conducted by others. In this case, a reduction of the initial velocity was noted. However, at late times the growth rate had a 1/t behavior as in the small-amplitude low-Mach number case. In the small-amplitude moderate-Mach number shock experiments a reduction from the impulsive theory was noted at the late stages. The passage of a shock wave through a spherical bubble results in the formation of a vortex ring. Simple dimensional analysis shows that the circulation depends linearly on the speed of sound of the surrounding material and on the initial bubble radius.     

Carbonate aeolianites of western Saurashtra,India: experimental decipherment of the depositional mechanisms

Granular carbonate deposits of Late Pleistocene to Early Holocene age, commonly referred to as ‘miliolite limestone’, occur in a linear belt, parallel to the southern coast of Saurashtra, India. In the present study area these carbonate deposits are found in select valleys between ridges and mounds of pyroclastic material present in the Deccan trap plateau. Two different depositional histories have been proposed for these sediments. The presence of marine bioclasts led to the postulation of a marine origin for these deposits. The second school of thought propounded redeposition of the coastal sediments by aeolian processes. Although a few features could not be explained by the proposed aeolian model, critical comparison of these two views favoured the aeolian origin. The mode of occurrence, lithological and structural attributes, and microscopic evidence presented here, also support a possible aeolian origin for these deposits. Experimental observation indicates that these carbonate aeolianites represent backflow deposits, which accumulated because of the flow separation caused by the presence of topographic highs. The conspicuous concave‐up geometry of the deposit conformed to the shape of the separation bulb. In view of the inferred depositional mechanism, the disposition of the deposits and the signature of the palaeoflow direction suggest that the carbonate particles were derived from the north‐western coast of Saurashtra by strong south‐easterly winds. Massive granular carbonates with outsized basement clasts appear to be the product of avalanching of granular material from the higher contours because of oversteepening of the primary deposit.     

Tidal and seasonal controls in the formation of Late Miocene inclined heterolithic stratification deposits, western Amazonian foreland basin

Upper Miocene strata in the Acre sub‐basin, Brazil, consist dominantly of various types of inclined heterolithic stratification and pedogenic horizons. These strata were sedimentologically and ichnologically described to: (i) study different temporal controls responsible for inclined heterolithic stratification generation and their variation in a distal–proximal trend; and (ii) delineate the depositional setting. For this purpose, nine representative outcrops were sedimentologically and ichnologically studied, and their facies associations described. Thickness variations of the heterolithic strata of various orders (lamina, lamina bundles and beds) were analysed by statistical methods (Fourier transform). The deposits were interpreted as tidally and seasonally influenced estuarine or delta‐related and continental strata. The inclined heterolithic stratification deposits represented vastly different settings ranging from tidally dominated, brackish‐water ichnofossils‐bearing channels to seasonally controlled, articulated Purussaurus (a freshwater alligator) fossil‐bearing channels. Several time cycles were distinguished in the strata, including semi‐diurnal, fortnightly and seasonal. Tidal imprint was best observed in low‐energy brackish‐water settings, whereas seasonal rhythmicity was distinguishable throughout the depositional system. However, the latter was most apparent in riverine channels proximal to the inferred fluvio‐tidal transition. The different temporal controls commonly had distinguishable impact on sedimentological and ichnological properties in the studied sediments. The differing properties included: (i) the degree and nature of lateral variability with respect to lithology and bedforms in inclined heterolithic stratification; (ii) the lateral continuity of inclined heterolithic stratification; (iii) the nature of sedimentary contacts between the inclined heterolithic stratification members; (iv) thickness variation of inclined heterolithic stratification members within a set; (v) the cyclicities observed in inclined heterolithic stratification series; (vi) the degree of bioturbation; (vii) the types of trace fossils observed; and (viii) the distribution of bioturbation in adjacent inclined heterolithic stratification members.