Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.     

地形面方法在渭河盆地活断层研究中的应用

本文主要依据地形图和航空照片解译，并经已有地质、钻孔资料验证及野外实地考察的方法来研究地形面及其变形特征，由此确定渭河盆地活断层的分布、最新活动特征及活动规律，为地震预报及地震危险性分析提供依据。     

Crystal-Melt Separation and the Development of Isotopic Heterogeneities in Hybrid Magmas

If a magma is a hybrid of two (or more) isotopically distinctend-members, at least one of which is partially crystalline,separation of melt and crystals after hybridization will leadto the development of isotopic heterogeneities in the magmaas long as some of the pre-existing crystalline material (antecrysts)retains any of its original isotopic composition. This holdstrue whether the hybridization event is magma mixing as traditionallyconstrued, bulk assimilation, or melt assimilation. Once a magma-scaleisotopic heterogeneity is formed by crystal–melt separation,it is essentially permanent, persisting regardless of subsequentcrystallization, mixing, or equilibration events. The magnitudeof the isotopic variability resulting from crystal–meltseparation can be as large as that resulting from differentialcontamination, multiple isotopically distinct sources, or insitu isotopic evolution. In one model, a redistribution of one-thirdof the antecryst cargo yielded a crystal-enriched sample with⁸⁷Sr/⁸⁶Sr of 0·7058, whereas the complementary crystal-poorsample has ⁸⁷Sr/⁸⁶Sr of 0·7068. In other models, crystal-richsamples are enriched in radiogenic Sr. Isotopic heterogeneitiescan be either continuous (controlled by the modal distributionof crystals and melt) or discontinuous (when there is completeseparation of crystals and liquid). The first case may be exemplifiedby some isotopically zoned large-volume rhyolites, formed bythe eruptive inversion of a modally zoned magma chamber. Inthe latter case, the isotopic composition of any (for example)interstitial liquid will be distinct from the isotopic compositionof the bulk crystal fraction. The separation of such an interstitialliquid may explain the presence of isotopically distinct late-stageaplites in plutons. Crystal–melt separation provides anadditional option for the interpretation of isotopically zonedor heterogeneous magmas. This option is particularly attractivefor systems whose chemical variation is otherwise explicableby fractionation-dominated processes. Non-isotopic chemicalheterogeneities can also develop in this fashion. KEY WORDS: isotopic heterogeneity; zoning; hybrid magma; crystal separation; Sr isotopes; aplite; rhyolite     

Implementation of reconstructed geomorphologic units in landslide susceptibility mapping: the Melen Gorge (NW Turkey)

In the international literature, although considerable amount of publications on the landslide susceptibility mapping exist, geomorphology as a conditioning factor is still used in limited number of studies. Considering this factor, the purpose of this article paper is to implement the geomorphologic parameters derived by reconstructed topography in landslide susceptibility mapping. According to the method employed in this study, terrain is generalized by the contours passed through the convex slopes of the valleys that were formed by fluvial erosion. Therefore, slope conditions before landsliding can be obtained. The reconstructed morphometric and geomorphologic units are taken into account as a conditioning parameter when assessing landslide susceptibility. Two different data, one of which is obtained from the reconstructed DEM, have been employed to produce two landslide susceptibility maps. The binary logistic regression is used to develop landslide susceptibility maps for the Melen Gorge in the Northwestern part of Turkey. Due to the high correct classification percentages and spatial effectiveness of the maps, the landslide susceptibility map comprised the reconstructed morphometric parameters exhibits a better performance than the other. Five different datasets are selected randomly to apply proper sampling strategy for training. As a consequence of the analyses, the most proper outcomes are obtained from the dataset of the reconstructed topographical parameters and geomorphologic units, and lithological variables that are implemented together. Correct classification percentage and root mean square error (RMSE) values of the validation dataset are calculated as 86.28% and 0.35, respectively. Prediction capacity of the different datasets reveal that the landslide susceptibility map obtained from the reconstructed parameters has a higher prediction capacity than the other. Moreover, the landslide susceptibility map obtained from the reconstructed parameters produces logical results.     

冈底斯新近纪钾质火山作用:消减沉积物折返的地球化学与Sr-Nd-Pb同位素证据

在冈底斯岩浆岩带的羊八井地区,林子宗火山岩系上部出现小规模的粗面质火山岩.岩石学与地球化学研究表明粗面岩与时空密切相关的大体积安山质-英安质-流纹质火山岩属于不同的火山岩系:碱性钾质系列与钙碱性系列.详细的地球化学研究证明林子宗晚期小体积钾质岩具有独立的岩浆源区,而非早期钙碱性系统低压岩浆过程演化的产物.粗面质熔岩SiO2含量为62.91%～64.63%,具有高K2O(7.52%～8.05%)、Al2O3(16.64%-17.35%)、低TiO2(0.59%～0.68%)与MsO(0.15%～0.77%).钾质熔岩富集LILE与LREE,亏损HFSE,具有高Rb/Sr(1.1～2.3)、Th/La(0.59～0.80)、Th/U(6.3～10.9)和低Ce/Pb(4.1～6.2)与Ba/Th(4.3～14.5)比值,其同位素组成变化范围分别是87Sr/86Sr(I)=0.7068～0.7075、143Nd/144Nd(I)=0.51241～0.51252、206Pb/204Pb=18.87～18.95、207Pb/204Pb=15.63～15.70和208Pb/204Pb=39.24～39.68.粗面岩的地球化学与同位素特征表明冈底斯新近纪钾质火山岩来源于角闪岩相的消减沉积物熔融.因此,羊八井新近纪钾质火山熔岩提供了印度-亚洲大陆碰撞早期消减沉积物折返的证据.     

Seasonal use of coastal resources by otters: Comparing sandy and rocky stretches

Seasonal patterns of use of coastal resources by otters have been studied, simultaneously performing diet analyses and spraint counts (expressed as marking intensity, MI). In spite of the small size of the study area, two different sectors could be clearly identified, a sandy and a rocky one. The origin (freshwater or coastal) of most prey types could also be determined. Surveys were performed bimonthly and classified as autumn–winter (A–W) or spring–summer (S–S).In the sandy sector, eels, flatfish and grey mullets were more frequently consumed in A–W, while crayfish was more frequently consumed in S–S. None of the identified prey types in the rocky sectors showed different frequency of occurrence values between the two periods. In this sector otter fed mainly on coastal prey throughout the year, while in the sandy one there was a clear shift from coastal prey to freshwater ones in S–S. The decrease of coastal prey consumption in S–S in the sandy sector coincided with the lowest MI values, showing that in this period otters use coastal areas less intensely. Though shifts in otter diet and use of space in the sandy sector are probably influenced by the population dynamics of estuarine fish species and crayfish, the increased tourist disturbance during spring and summer in the sandy sector could be an important determinant of the observed patterns. Finally, the results show that MI can be used as a reliable measure of habitat use by otters, at least in small areas.     

Rare species, habitat diversity and functional redundancy in marine benthos

Macro-ecological theories relating species richness, abundance, range size, biological traits and environmental tolerance have rarely been tested in marine soft-sediments, despite the spatial extent of these habitats and the inherent richness of resident communities. This study examines the contribution of rare species to marine soft-sediment communities from New Zealand, focussing on the relationships of range size with abundance, environment, habitat diversity and life history traits. 54% of the 351 species sampled exhibited restricted ranges (found at ≤ 2 sites). In contrast to many terrestrial systems, we observed only a weak positive relationship between abundance and frequency of occurrence. Restricted-range species were not randomly distributed, with their distribution related to habitat characteristics, suggesting an important link between habitat diversity and rarity. They exhibited a similar range of traits to the total observed species pool, suggesting that they are not only important to biodiversity but could play a role in stability. Restricted range species were generally not small and this, together with the number of different biological traits represented, suggests that rare species are important to the functioning of marine systems. Thus, our results highlight the importance of considering rare species in habitat-based approaches to conservation.     

Sampling procedure for small-scale heterogeneities (crossbedding) for reservoir modelling

Sampling permeability from individual laminae in crossbedded rocks is very well possible by making use of a so-called probe permeameter. The methodology and calculation of permeabilities from the output of this instrument are fairly well-established. However, what is hardly established is a sampling strategy that guarantees adequate representation of permeability contrast between laminae. Especially so, because finer foreset and bottomset are difficult to sample, yet their permeabilities are critical to fluid flow through a crossbed. Therefore we propose to systematically sample laminae. To this end we suggest a sampling strategy that is adapted to the heterogeneity under study, namely to the thickness of the finer foreset.