Pressure-induced incipient amorphization of α-quartz and transition to coesite in an eclogite from Antarctica: a first record and some consequences

Monocrystalline quartz inclusions in garnet and omphacite from various eclogite samples from the Lanterman Range (Northern Victoria Land, Antarctica) have been investigated by cathodoluminescence (CL), Raman spectroscopy and imaging, and in situ X‐ray (XR) microdiffraction using the synchrotron. A few inclusions, with a clear‐to‐opalescent lustre, show ‘anomalous’ Raman spectra characterized by weak α‐quartz modes, the broadening of the main α‐quartz peak at 465 cm^?1, and additional vibrations at 480–485, 520–523 and 608 cm^?1. CL and Raman imaging indicate that this ‘anomalous’α‐quartz occurs as relicts within ordinary α‐quartz, and that it was preserved in the internal parts of small quartz inclusions. XR diffraction circular patterns display irregular and broad α‐quartz spots, some of which show an anomalous d‐spacing tightening of ～2%. They also show some very weak, hazy clouds that have d‐spacing compatible with coesite but not with α‐quartz. Raman spectrometry and XR microdiffraction characterize the anomalies with respect to α‐quartz as (i) a pressure‐induced disordering and incipient amorphization, mainly revealed by the 480–485 and 608‐cm^?1 Raman bands, together with (ii) a lattice densification, evidenced by d‐spacing tightening; (iii) the cryptic development of coesite, 520–523 cm^?1 being the main Raman peak of coesite and (iv) Brazil micro‐twinning. This ‘anomalous’α‐quartz represents the first example of pressure‐induced incipient amorphization of a metastable phase in a crustal rock. This issue is really surprising because pressure‐induced amorphization of metastable α‐quartz, observed in impactites and known to occur between 15 and 32 GPa during ultrahigh‐pressure (UHP) experiments at room temperature, is in principle irrelevant under normal geological P–T conditions. A shock (due to a seism?) or a local overpressure at the inclusion scale (due to expansion mismatch between quartz and its host mineral) seem the only geological mechanisms that can produce such incipient amorphization in crustal rocks. This discovery throws new light on the modality of the quartz‐coesite transition and on the pressure regimes (non‐lithostatic v. lithostatic) during high‐pressure/UHP metamorphism. In particular, incipient amorphization of quartz could favour the quartz‐coesite transition, or allow the growth of metastable coesite, as already experimentally observed.     

Ultrahigh pressure macro diamonds from Copeton (New South Wales, Australia), based on Raman spectroscopy of inclusions

Mining of Cenozoic alluvial deposits at Copeton and Bingara (Eastern Australia) has produced two million macrodiamonds (0.25 ct median size). Raman spectroscopy is used to identify included minerals within uncut Copeton diamonds, with sealed chamber remnant pressures of 31.7 to 35.6 kbar for coesite, 13.6 and 22.7 kbar for clinopyroxene, and 7.6 kbar for grossular garnet. Assuming elastic behaviour, these values generate inclusion entrapment PT loci which intersect, restricting diamond formation conditions: from 250 °C, 43 kbar to 800 °C, 52 kbar. Larger than error (± 100 °C and ± 4 kbar), this range shows a systematic variation in inclusion composition with diamond zoning and N properties. Published research shows 1) Copeton and Bingara diamonds are unique, and 2) modern alluvium in the Bingara district carries mantle-formed garnet, captured by post-tectonic alkali basalt from an extensive diamondiferous ultrahigh pressure (UHP) terrane that stalled at depth because it is dominated by mafic eclogite. The combined Raman and geological results indicate two sets of subduction UHP diamond formation conditions/protolith are required, firstly cooler oceanic slab and secondly including higher temperature continental crust. The Copeton and Bingara stones are UHP macrodiamonds, and Carboniferous ⁴⁰Ar/³⁹Ar age dates on clinopyroxene inclusions should be interpreted as ages of crystallisation, representing the termination of subduction. The characteristic features of ruptured inclusions and etched percussion marks on Copeton and Bingara diamond indicate volcanic delivery to the earth's surface. Alluvial deposits elsewhere in Eastern Australia may carry similar diamond along with diamond of different origin.     

流体包裹体成分测定的低温相变和显微拉曼光谱分析技术研究进展

论述了包裹体低温分析技术的原理以及进展。传统的流体包裹体低温分析技术是以显微冷冻测温测定无机盐体系为主,目前已发展到应用低温原位拉曼光谱技术对包裹体中的阳离子和阴离子进行定量-半定量分析。油气包裹体原位低温分析技术也取得了较大的突破,对不同成分油气包裹体低温下的相变过程取得了一定的认识,据此对油气包裹体进行分类,推测其主要成分,为油气包裹体计算提供基础参数。     

激光拉曼光谱法分析多种显微组分荧光变化及其应用

利用激发488 nm激光的氩离子激光器作为RENISHAW inVia型激光拉曼光谱仪的光源,建立了多种显微组分荧光变化(FAMM)分析方法,并对镜质体反射率明显抑制的东营凹陷有效烃源岩进行了测定。结果表明,东营凹陷有效烃源岩的有机质类型越好,镜质体反射率抑制程度越高,有效烃源岩的真实成熟度应主要处于0.64%~1.30%,而不是实测镜质体反射率所反映的0.37%~1.10%。     

Micro-XANES mapping of sulphur and its association with magnesium and phosphorus in the shell of the brachiopod, Terebratulina retusa

Biominerals are natural composite materials comprising organic and inorganic components. Detailed knowledge of the nature and distribution of both components is a crucial requirement in order to advance our understanding of biomineral formation, their material properties and preservation potential as well as the interpretation of environmental data. Detailed chemical data are essential for our understanding of the nature and distribution of such components. Micro-XANES mapping at the sulphur K-edge reveals that, in the brachiopod Terebratulina retusa, the sulphate concentration is higher in the outer (primary) layer than in the calcite fibres of the secondary layer. This is co-incident with a higher magnesium concentration. In contrast, the sheaths surrounding the calcite fibres contain sulphur as thiol, confirming the presence of protein while, the sulphur within the fibres themselves, occurs as sulphate. Micro-XANES analysis of the insoluble organic extract from T. retusa indicates the presence of organic sulphate while Micro-Raman spectroscopy confirms that structurally substituted sulphate (SSS) is also present although semi-quantitative Raman spectroscopy carried out in this spectral region (wavenumbers 900–1200) indicates that the sulphate present is at the threshold of detection by Raman spectroscopy. The distribution of phosphorus in the shell of T. retusa correlates well with that of protein indicating the presence of phosphorylated proteins in the periostracum, the sheaths surrounding the calcite fibres and the interface between the primary and secondary layer.     

安徽铜陵朝山金矿床流体包裹体研究

朝山金矿床是狮子山矿田内的热液交代型金矿床,在成因上与燕山期的白芒山辉石闪长岩有关.通过采集发育在不同深度下的含金黄铁矿-石英一方解石脉样品,进行流体包裹体岩相学观察和显微测温发现,石英和方解石中均捕获了富气相、富液相的两相水溶液包裹体和含子晶的三相水溶液包裹体,以上三种类型包裹体的均一温度统计峰值分别出现于315～335℃和255～275℃,盐度的统计峰值出现于17.50%～22.50%NaCl eq.和32.50%～37.50%NaCl eq.之间.激光拉曼探针分析表明,石英中流体包裹体的气相成分以水蒸汽为主,伴有少量CO2,可能含有CH4.流体的H、O同位素组成具确岩浆水特征.上述研究表明.朝山金矿成矿流体经历了相态变化,发生了不均匀捕获.受燕山期岩浆作用影响,狮子山矿田内的铜、金成矿在时空上具有一定联系,成矿流体运移的过程中,主要发生了相分离、气相液化和减压沸腾作用,可能是形威铜、金矿化分带的重要原因.     

白天工作条件下大气激光雷达探测的实验研究

作者在已完成大气激光雷达系统夜间工作的基础上 ,对白天工作条件下的各种环境背景光的干扰进行了理论与实验分析 ,得出太阳直射光和天空光为白天工作的主要背景干扰。实验结果表明 ,经过激光发射与接收视场角严格匹配及使用干涉滤光器 (2 .6 nm和 0 .15nm)进行窄带滤波 ,背景干扰被明显地剔除 ,可进一步压低背景干扰约 2 0倍。证明采取视场匹配及干涉滤光器的措施可基本保证激光雷达系统在白天条件下工作。     

外差激光雷达测量水体布里渊散射可行性研究

该文分析外差激光雷达测量水体布里渊散射的可行性。借助测量水体布里渊散射的频移 ,可得到水体声速或温度。文中利用两条 12 7I2 吸收线锁定激光输出频率 ,产生稳定的频差约为7.5 GHz发射激光和激光本振。通过对 12 7I2 吸收线稳定度、激光频率稳定度、系统信噪比和反演精度的分析和计算机模拟 ,得出水体深度 2 5 m以内水体布里渊散射频移的测量误差可以控制在2 .5 MHz以内 ,达到水中声速 0 .6 m/ s或温度 0 .1℃的测量精度。     

一种改进的基于坡度变化的机载激光雷达点云滤波方法

机载激光点云数据滤波是获取高精度数字表面模型和数字高程模型的关键。本文分析了几种重要的滤波算法,在研究基于坡度变化的滤波算法的基础上,提出一种改进的分块滤波处理的方法。实验表明:该方法能有效对点云数据进行分类。     

Accuracy assessment of lidar-derived digital elevation models

Despite the relatively high cost of airborne lidar-derived digital elevation models (DEMs), such products are usually presented without a satisfactory associated estimate of accuracy. For the most part, DEM accuracy estimates are typically provided by comparing lidar heights against a finite sample of check point coordinates from an independent source of higher accuracy, supposing a normal distribution of the derived height differences or errors. This paper proposes a new methodology to assess the vertical accuracy of lidar DEMs using confidence intervals constructed from a finite sample of errors computed at check points. A non-parametric approach has been tested where no particular error distribution is assumed, making the proposed methodology especially applicable to non-normal error distributions of the type usually found in DEMs derived from lidar. The performance of the proposed model was experimentally validated using Monte Carlo simulation on 18 vertical error data-sets. Fifteen of these data-sets were computed from original lidar data provided by the International Society for Photogrammetry and Remote Sensing Working Group III/3, using their respective filtered reference data as ground truth. The three remaining data-sets were provided by the Natural Environment Research Council's Airborne Research and Survey Facility lidar system, together with check points acquired using high precision kinematic GPS. The results proved promising, the proposed models reproducing the statistical behaviour of vertical errors of lidar using a favourable number of check points, even in the cases of data-sets with non-normally distributed residuals. This research can therefore be considered as a potentially important step towards improving the quality control of lidar-derived DEMs.