Nonlinear coupled dynamic response of offshore Spar platforms under regular sea waves

Many innovative floating offshore structures have been proposed for cost effectiveness of oil and gas exploration and production in water depths exceeding one thousand meters in recent years. One such type of platform is the offshore floating Spar platform. The Spar platform is modelled as a rigid body with six degrees-of-freedom, connected to the sea floor by multi-component catenary mooring lines, which are attached to the Spar platform at the fairleads. The response dependent stiffness matrix consists of two parts (a) the hydrostatics provide restoring force in heave, roll and pitch, (b) the mooring lines provide the restoring force which are represented here by nonlinear horizontal springs. A unidirectional regular wave model is used for computing the incident wave kinematics by Airy’s wave theory and force by Morison’s equation. The response analysis is performed in time domain to solve the dynamic behavior of the moored Spar platform as an integrated system using the iterative incremental Newmark’s Beta approach. Numerical studies are conducted for sea state conditions with and without coupling of degrees-of-freedom.     

半潜式超大浮体连接器动力特性的一种时间序列分析方法

根据刚性模块弹性连接器 (RMFC)假设研究由 3个模块连接而成的半潜式超大浮体MobileOffshoreBase(MOB)的波浪载荷动力响应。模块和连接器动力响应根据时间序列法计算 ,这种方法包括海况模拟 ,波浪载荷计算和结构响应计算三个主要部分。通过对结构的适当简化 ,根据Airy波理论 ,Morrison公式以及流体中的结构运动方程、弹性连接器变形方程 ,计算求得MOB在不规则海况下的动力响应 ,并将其与相关文献中的结果进行比较 ,表明该方法有良好的精确性     

Evaluation of long-term extreme response statistics of jack-up platforms

This paper is concerned with the models appropriate for the dynamic assessment of jack-ups, concentrating particularly on the long-term response due to random ocean waves and on work-hardening plasticity models used for spud-can response. A methodology for scaling of short-term statistics, calculated using a Constrained NewWave technique, is shown in a numerical experiment for an example jack-up and central North Sea location. The difference in long-term extreme response statistics due to various footing assumptions is emphasised. Results for two environmental load conditions are described (one excluding and one including wind and current effects) and the role of sea-state severity in the variation of short-term extreme response statistics is also highlighted.     

A fuzzy approach to the lectotype optimization of offshore platforms

Lectotype optimization of offshore platforms is of particular importance in the concept design process. Lectotype optimization involves multiple objectives with uncertainty and so is a problem of multiple attribute decision making. To date, there have been few published works on this topic in the context of offshore engineering. This paper develops a framework and methodology for evaluation of offshore platform alternatives, where a fuzzy optimum model is proposed to integrate the influence of each objective in the criteria set, and a new weight-assessing method is developed to mimic the decision maker’s experience and preference based on complementary pairwise comparisons. A case study shows that the new framework and methodology is scientific, reasonable and easy to use in practice.     

移动式海上基地(MOB)连接器动力响应试验研究

移动式海上基地(Mobile Offishore Base，MOB)是由若干半潜模块相连而成的超大型浮式结构物。在进行海上作业时，模块间的连接器将会产生巨大的载荷。用缩尺比为1：100的三模块MOB模型在实验室进行了连接器动力响应试验研究。文中对试验的关键问题，如连接器模型的设计、制作、安装、试验工况的确定和测试方法等作了较详细的介绍。     

The Potential for Environmentally Sound Development of Marine Deposits of Potassic and Phosphatic Minerals Offshore, Southern Africa

Extensive potassium and phosphorous-rich mineralization occurs on the outer continental shelf of the southern and west coasts of South Africa and Nambia. This article reviews the potential of exploiting these deposits in an environmentally sound manner for the manufacture of fertilizer. At present, reserves of potash and phosphate fertilizer are exploited from terresterial deposits, the majority being surface mined. The use of fertilizer in South Africa has shown no growth in the past 13 years, and, in some years, usage has even declined. On average, over the last decade, South Africa has consumed 2 million Mt of fertilizer (including nitrogen) per annum, the vast majority of phosphate fertilizer being produced by FOSKOR from the Phalaborwa Igneous Complex. Potash fertilizer is imported into South Africa. Although fertilizer consumption is expected to decrease in the short-term, there are good future prospects for the domestic and international fertilizer market. Considerable research into both glauconitic (containing K 2 O) and phosphatic deposits along the southern African continental shelf indicate that these sedimentary deposits have a complex genesis and mineralization. Of the total K 2 O reserves of 1300 million Mt on the southern African margin, 1000 million Mt is located off the southern African west coast, and the remainder situated on the Agulhas Bank. The largest glauconite concentration ( ±300 million Mt K 2 O) off southern Africa lies west of Saldanha Bay, South Africa. The distribution of P 2 O 5 off southern Africa is dominated by the vast deposit between Walvis Bay and Luderitz, Nambia. This reserve is estimated to contain 1000 million Mt of greater than 5% P 2 O 5 in a relatively small area of about 10000 km2. The phosphorite deposit south of Saldanha Bay constitutes a reserve of ±3500 million Mt of apatite and the deposit on the Agulhas Bank comprises 5500 million Mt. The phosphate deposit off Saldanha Bay occurs as an extensive, low to medium grade deposit. Although vast resources of potash and phosphatic minerals occur along the southern African outer continental shelf the expensive nature of marine exploitation may render most of these deposits, especially the phosphates, subeconomic. The low price of fertilizer andextensive natureontheonland deposits, although confined to asmallnumber of countries, mean that it will not be financially viable to extract these deposits. Assuming high grade glauconitic sand with the right composition can be located, the high market price indicates good future prospects for these potash deposits.     

Cyclic inelastic behavior and analytical modelling of pile–leg interaction in jacket type offshore platforms

Structures in locations susceptible to severe seismic disturbances should be designed properly in order to resist lateral forces induced by earthquake motions. Steel offshore platforms are some of those structures which are built to withstand environmental and accidental loads during oil exploitation operation. Particular attention is being paid to earthquake loads in seismic active areas because it directly influences the capacity of the offshore installations.

In this paper, a small-scaled planar platform has been modelled analytically using nonlinear finite element program, based on an experimental test, conducted simultaneously in order to assess the local and global behavior of pile–leg interaction in Jacket Type Offshore Platforms (JTOPs). A combination of nonlinear beam column elements and fatigue affected elements are used to capture the inelastic cyclic behavior of planar frame as accurately as possible. Results of analytical tests are to be compared with experiments and it is concluded that an analytical approach can be best used for modelling JTOPs with reasonable accuracy regardless of the type and scale of the structure. Moreover, a special study on joints has been carried out and the best model has been selected to simulate brittle behavior of joints resulting from heat affected zone.     

Free spanning analysis of offshore pipelines

A rigorous procedure was established on the free span analysis of offshore pipelines. The closed form solutions of the beam–column equation, considering tension and compressive force, were derived for the various possible boundary conditions. The solutions can be used to find the natural frequencies of the free spans using the energy balance concept. The results can be applied to improve the current design codes. The improved procedure will yield more realistic calculations of the allowable free span lengths of offshore pipelines. Some calculations are included to present the sensitivity of the axial forces on the allowable free spanning lengths.     

冲绳海槽中西部边缘区沉积物成因和沉积环境

本文根据１９９６年“中－法合作东海计划”在冲绳海槽中西部边缘区所取柱状样岩芯沉积物粒度分析资料,对该区沉积物特征进行研究。结果表明,火山沉积和富含生物的半远洋深海软泥沉积是本区的主要特征。以４８１ｃｍ为界,上、下两层沉积物截然不同,可能是沉积物的来源不同或者是水动力条件的差异。该区主要受火山活动的影响,其次是黑潮、大洋风暴     

A methodology for assessing the reliability of taut and slack mooring systems against instability

In the present study, a methodology for reliability assessment of slack and taut mooring systems against instability has been presented. For this purpose, first, stability analysis of slack and taut mooring systems has been carried out and instable regions are obtained using procedure available in the literature. Having known the instable region(s), methodology for reliability assessment has been proposed which is based on Monte Carlo Simulation technique. After using the proposed methodology, probabilities of failure and reliability indices has been obtained for the above systems. Some parametric studies, such as, effect of lower and upper limits of instability and effect of frequency range of generations are also included to obtain the results of practical interest.