Structural architecture of a highly oblique divergent plate boundary segment

The Reykjanes Peninsula in southwest Iceland is a highly oblique spreading segment of the Mid-Atlantic Ridge oriented about 30° from the direction of absolute plate motion. We present a complete and spatially accurate map of fractures for the Reykjanes Peninsula with a level of detail previously unattained. Our map reveals a variability in the pattern of normal, oblique- and strike-slip faults and open fractures which reflects both temporal and spatial strain partitioning within the plate boundary zone. Fracture density varies across the length and width of the peninsula, with density maxima at the ends and at the northern margin of the zone of volcanic activity. Fractures with similar strike cluster into distinct structural domains which can be related to patterns of faulting predicted for oblique extension and to their spatial distribution with respect to volcanic fissure swarms. Additional structural complexity on the Reykjanes Peninsula can be reconciled with magmatic periodicity and associated temporal strain partitioning implied by GPS data, as well as locally perturbed stress fields. Individual faults show variable slip histories, indicating that they may be active during both magmatic and amagmatic periods associated with different strain fields.     

A comparison of mud- and sand-dominated meanders in a downstream coarsening reach of the mixed bedrock-alluvial Klip River, eastern Free State, South Africa

Along a 28 km reach of the Klip River, eastern Free State, South Africa, mud- and sand-dominated meanders have developed in close proximity within a floodplain wetland up to 1.5 km wide, providing an unusual opportunity to compare their characteristics under similar hydrological conditions. Throughout the reach, the channel bed is grounded on sandstone/shale bedrock although the banks are alluvial, and most river activity occurs during summer high flows. The reach can be divided into three geomorphological zones: Zone 1 (0–11 km), a muddy proximal part with a single meandering channel (w/d < 10) and near-permanent standing water in oxbows and backswamps; Zone 2 (11–17.5 km), a transitional mud-to-sand part with one main channel (w/d  20–30), a number of sinuous palaeochannels and oxbows, and only limited standing water; and Zone 3 (17.5–28 km), a sandy distal part with a single meandering channel (w/d  15–30), scroll bars and oxbows, and little standing water. Each zone also has a distinctive sedimentology: Zone 1 is characterised by an  3–4 m thick succession of basal sand and minor granules overlain by dominantly muddy sediment deposited primarily by oblique accretion in meander bends; Zone 2 is characterised by < 4 m of interbedded sand and mud deposited primarily by lateral point-bar accretion, although a history of avulsions also attests to the importance of abandoned-channel accretion; and Zone 3 is characterised by < 3 m of dominantly sand deposited primarily by lateral point-bar accretion. This unusual downstream sediment coarsening trend, and the associated changes in channel and floodplain character, are independent of sediment inputs from tributaries, and result from a downstream increase in bankfull unit stream power from < 3.5 W m^− 2 (Zone 1) to  4–10 W m^− 2 (Zone 3). Mud is deposited primarily in low-energy Zone 1 but is conveyed in suspension more effectively through higher energy Zones 2 and 3, only forming drapes over sandy lateral accretion deposits during waning flood stages. The downstream increase in unit stream power is controlled in part by a slight downstream increase in floodplain gradient that may be related to a subtle variation in the erosional resistance of the bedrock underlying the channel bed. These findings add to previous work on meandering rivers by demonstrating that mud-dominated meanders can occur in long-term erosional settings where the channel bed is grounded on bedrock, and that downstream fining trends may be reversed locally.     

Seafloor spreading, obduction and triple junction tectonics of the Mineoka Ophiolite, Central Japan

The Tertiary Mineoka ophiolite occurs in a fault zone at the intersection of the Honshu and Izu forearcs in central Japan and displays structural evidence for three major phases of deformation: normal and oblique-slip faults and hydrothermal veins formed during the seafloor spreading evolution of the ophiolite at a ridge-transform fault intersection. These structures may represent repeated changes in differential stress and pore-fluid pressures during their formation. The second series of deformation is characterized by oblique thrust faults with Riedel shears and no significant mineral veining, and is interpreted to have resulted from transpressional dextral faulting during the obduction of the ophiolite through oblique convergence and tectonic accretion. This deformation occurred at the NW corner of a TTT-type (trench–trench–trench) triple junction in the NW Pacific rim before the middle Miocene. The third series of deformation of the ophiolite is marked by contractional and oblique shear zones, Riedel shears, and thrust faults that crosscut and offset earlier structures, and that give the Mineoka fault zone its lenticular (phacoidal) fabric at all scales. This deformation phase was associated with the establishment and the southward migration of the TTT Boso triple junction and with the kinematics of oblique subduction and forearc sliver fault development. The composite Mineoka ophiolite hence displays rocks and structures that evolved during its complex geodynamic history involving seafloor spreading, tectonic accretion, and triple junction evolution in the NW Pacific Rim.     

塔城市一次暴雪天气的分析

2003年2月22日塔城市出现一次暴雪天气过程。文章着重分析了此次天气过程的高空环流形势、地面形势、T—Td等，指出暖湿气流是造成暴雪的主要原因。     

Morphological and microtectonic analysis of Quaternary deformation from Puná and Santa Clara Islands, Gulf of Guayaquil, Ecuador (South America)

This paper presents the neotectonic study of Santa Clara and Puná Islands sited in the Gulf of Guayaquil eastern part. Both islands are located on the south-western segment of the fault zone bounding to the east the North Andean Block. Fault motion and morphostructural analysis were carried out from Pleistocene age terrain. A two step deformation characterises the South Puná tectonics. The first step involves the Zambapala Cordillera uplift that post-dates Pleistocene sediments and pre-dates a marine terrace correlated with the M.I.S. 11 or 13 (440–550 ka). The second step is the formation of a pull-apart that shows evidence of 2.9 km dextral offset since the M.I.S. 11 or 13, giving an offset mean rate of 5.3 to 6.6 mm/yr. This rate is higher than the one calculated on the Pallatanga Fault northeast of the study area, in the Western Andean Cordillera, suggesting that deformation is split in different fault segments from the Gulf of Guayaquil to the continent. The Zambapala Cordillera uplift and transpression deformation requires a compressive event that may have been induced by the subduction process during the early Pleistocene.     

Role of the Kazerun fault system in active deformation of the Zagros fold-and-thrust belt (Iran)

Field structural and SPOT image analyses document the kinematic framework enhancing transfer of strike-slip partitioned motion from along the backstop to the interior of the Zagros fold-and-thrust belt in a context of plate convergence slight obliquity. Transfer occurs by slip on the north-trending right-lateral Kazerun Fault System (KFS) that connects to the Main Recent Fault, a major northwest-trending dextral fault partitioning oblique convergence at the rear of the belt. The KFS formed by three fault zones ended by bent orogen-parallel thrusts allows slip from along the Main Recent Fault to become distributed by transfer to longitudinal thrusts and folds. To cite this article: C. Authemayou et al., C. R. Geoscience 337 (2005).     

月球东海盆地综合解析与撞击初始条件的研究

东海是月球上最年轻的多环撞击盆地,关于其形成机制的研究很多,但成果大都基于正撞击的机制提出的,虽然有部分学者提出东海是斜撞击的,但缺乏具体撞击参数。本文通过多源数据融合,综合分析LRO影像数据、LOLA地形数据、M~3高光谱数据和IIM高光谱数据,对东海地区的地貌特征、物质成分进行了较为系统的解译,发现在东海中央熔融区存在一条与东海撞击方向垂直的中央隆起区域(中央隆起线),其也是中央熔融区粗糙部分与光滑部分的分界线,结合撞击坑成坑理论,认为其可能是撞击过程冲击波作用引起的堆叠作用形成的。同时利用GRAIL数据及对该地区的重力异常的成因进行了分析,认为异常是由于压强、温度及岩石粘度的改变引起局部莫霍面抬升和中央熔融物的形成而出现的,进而估算出熔融物占盆地内物质的25%,约为1.1×10~6km~3。同时,对GRAIL数据的剖面分析结果也支持了本文的斜撞击理论。最后,综合多方面的信息和撞击理论获取东海盆地构造分布图,并根据中央隆起线、溅射物及线性构造的分布特征等,提出东海盆地理论上是由一直径在50~100km的撞击体以10~30km/s的速度自东偏北约20°~30°方向以20°~30°的角度斜撞击月表而形成的。这可为研究更早期的月球撞击坑提供理论参考。     

横向沙丘背风侧沙粒风蚀起动的风洞模拟

通过风洞实验,探讨了横向沙丘背风侧“二次流”的沉积学和形态-动力学意义。在不同迎风坡坡度的横向沙丘模型背风侧,我们观测了不同位置沙粒的起动风速以及在临界状态下沙粒的运动特征。结果表明,沙丘背风侧的颗粒起动风速不仅与其距沙丘顶部的距离有关,也与沙丘迎风坡坡度有密切关系。根据沙丘背风侧颗粒运动特征,可以将其划分为向后运动区域、晃动或摆动区域以及向前运动区域,产生这一现象的原因是在沙丘背风坡气流分离、反向涡和气流重新辐合共同作用的结果。在所有的观测结果中,迎风坡坡度为15°的沙丘具有最大的沙粒起动风速和最远的气流重新辐合距离,其原因尚需进一步研究。     

典型深街谷内树木空间配置对行人呼吸高度处气流的影响

为揭示树木的不同空间配植方案对行人呼吸高度气流的影响,本文将树木视为均匀多孔介质,通过附加源项法从空气动力学角度用CFD模拟了H/W=2的典型深街谷几何内4种树木配植情景,实验表明,不同空间配置下树木对街谷内行人呼吸高度处局地气流的影响强弱在空间分布模式上差异悬殊：① 均匀种植的树木对街谷内行人呼吸高度的气流起到阻碍作用,不均匀种植则有效提升街谷的整体流速。4种空间配植方案下树木对气流的影响程度不同,阻碍作用从大到小的顺序为均匀间距8 m（Spa8m）>均匀间距6 m（Spa6m）>均匀间距20 m（Spa20m）>不均匀配植（Non-uniform）;对应的平均气流增强指标顺序为$\bar{D}_{spa8}$（-19.31%）<$\bar{D}_{spa6}$（-16.14%）<$\bar{D}_{spa20}$（-10.73%）<$\bar{D}_{non-uniform}$（1.25%）。② 对比不均匀和均匀的种植方案,不均匀植树的街谷内部行人呼吸高度的气流流速比其对照案例（均匀植树Spa8m方案）整体增强了106.49%。街谷中部不种树,在街谷两端配置树木并预留足够的自由空间的不均匀植树方案,能够让角涡渗入街谷中部,促使街谷内部的垂直漩涡和两端的水平角涡运动,增强湍流和垂直交换,有效减少了街道两端“风口效应”和街道中部“风影效应”的区域,改善了整个街谷行人呼吸平面的风环境。④ 合理空间配置的树木能够改善街谷内部的行人风环境。街谷内行人呼吸高度处的气流对局地条件很敏感,树木的局部配置（空间簇集、密度）将引起强烈的空间变化。在既有城市建筑布局条件下,如何通过谨慎的景观设计,利用树木等城市绿化措施有效地改善城市的行人风环境,缓解污染扩散、疾病传播等问题,本文的方法可提供一定的参考。     

过山气流与大兴安岭焚风

本文利用二维大气中尺度数值模式,模拟了冬季1月份大兴安岭东坡的焚风现象,并讨论了该焚风的成因。