Geostatistical features of streambed vertical hydraulic conductivities in Frenchman Creek Watershed in Western Nebraska

This study evaluated the spatial variability of streambed vertical hydraulic conductivity (K_v) in different stream morphologies in the Frenchman Creek Watershed, Western Nebraska, using different variogram models. Streambed K_v values were determined in situ using permeameter tests at 10 sites in Frenchman, Stinking Water and Spring Creeks during the dry season at baseflow conditions. Measurements were taken both in straight and meandering stream channels during a 5 day period at similar flow conditions. Each test site comprised of at least three transects and each transect comprised of at least three K_v measurements. Linear, Gaussian, exponential and spherical variogram models were used with Kriging gridding method for the 10 sites. As a goodness-of-fit statistic for the variogram models, cross-validation results showed differences in the median absolute deviation and the standard deviation of the cross-validation residuals. Results show that using the geometric means of the 10 sites for gridding performs better than using either all the K_v values from the 93 permeameter tests or 10 K_v values from the middle transects and centre permeameters. Incorporating both the spatial variability and the uncertainty involved in the measurement at a reach segment can yield more accurate grid results that can be useful in calibrating K_v at watershed or sub-watershed scales in distributed hydrological models.     

Numerical modeling for analyzing thermal surface anomalies induced by underground coal fires

Coal seams burning underneath the surface are recognized all over the world and have drawn increasing public attention in the past years. Frequently, such fires are analyzed by detecting anomalies like increased exhaust gas concentrations and soil temperatures at the surface. A proper analysis presumes the understanding of involved processes, which determine the spatial distribution and dynamic behavior of the anomalies.In this paper, we explain the relevance of mechanical and energy transport processes with respect to the occurrence of temperature anomalies at the surface. Two approaches are presented, aiming to obtain insight into the underground coal fire situation: In-situ temperature mapping and numerical simulation. In 2000 to 2005, annual temperature mapping in the Wuda (Inner Mongolia, PR China) coal fire area showed that most thermal anomalies on the surface are closely related to fractures, where hot exhaust gases from the coal fire are released. Those fractures develop due to rock mechanical failure after volume reduction in the seams. The measured signals at the surface are therefore strongly affected by mechanical processes.More insight into causes and effects of involved energy transport processes is obtained by numerical simulation of the dynamic behavior of coal fires. Simulations show the inter-relation between release and transport of thermal energy in and around underground coal fires. Our simulation results show a time delay between the coal fire propagation and the observed appearance of the surface temperature signal. Additionally, the overall energy flux away from the burning coal seam into the surrounding bedrock is about 30-times higher than the flux through the surface. This is of particular importance for an estimation of the energy released based on surface temperature measurements. Finally, the simulation results also prove that a fire propagation rate estimated from the interpretation of surface anomalies can differ from the actual rate in the seam.     

Simultaneous transport of water and solutes under transient unsaturated flow conditions — A case study

The imbalance between incoming and outgoing salt causes salinization of soils and sub-soils that result in increasing the salinity of stream-flows and agriculture land. This salinization is a serious environmental hazard particularly in semi-arid and arid lands. In order to estimate the magnitude of the hazard posed by salinity, it is important to understand and identify the processes that control salt movement from the soil surface through the root zone to the ground water and stream flows. In the present study, Malaprabha sub-basin (up to dam site) has been selected which has two distinct climatic zones, sub-humid (upstream of Khanapur) and semi-arid region (downstream of Khanapur). In the upstream, both surface and ground waters are used for irrigation, whereas in the downstream mostly groundwater is used. Both soils and ground waters are more saline in downstream parts of the study area. In this study we characterized the soil salinity and groundwater quality in both areas. An attempt is also made to model the distribution of potassium concentration in the soil profile in response to varying irrigation conditions using the SWIM (Soil-Water Infiltration and Movement) model. Fair agreement was obtained between predicted and measured results indicating the applicability of the model.     

煤岩对压裂裂缝长期导流能力影响的实验研究

煤层中一般都伴有煤层气,通过压裂可以将煤层气释放出来,一方面能够获得清洁能源,另一方面可以提高煤田的安全开采。煤岩层自身特点决定了其在压裂中应用的实验评价方法及结论应具有特殊性,本文主要针对煤层气井的煤岩层压裂裂缝长期导流能力进行实验评价研究。实验表明,与砂岩地层不同,煤岩的硬度较小,压裂中支撑剂嵌入情况较严重;煤岩易破碎,碎屑颗粒充填到支撑剂中;同时支撑剂存在破碎及吸附伤害等,多种作用导致支撑裂缝的导流能力降低。实验中,以煤岩层闭合压力为一个重要的参数,实验对比分析了在不同闭合压力下,铺砂浓度、支撑剂粒径、支撑剂种类及组合的选择、支撑剂颗粒的破碎与嵌入、压裂液残渣等因素对煤岩层导流能力的影响。本文的实验结论为,嵌入对煤岩层支撑裂缝的导流能力伤害很大,加大铺砂浓度、采用低破碎率支撑剂、降低压裂液伤害能在一定程度上提高煤层裂缝的导流能力,但影响程度随闭合压力的增加而逐渐降低。本文所得出的结论对今后煤层气的开发及设计施工具有一定的指导意义。     

The relationship between hydrodynamic properties and weathering of soils derived from volcanic rocks,Galapagos Islands (Ecuador)

The aim of this interdisciplinary study is to examine a component of the hydrological cycle in Galapagos by characterizing soil properties. Nine soil profiles were sampled on two islands. Their physical and hydrodynamic properties were analyzed, along with their mineralogical composition. Two groups of soils were identified, with major differences between them. The first group consists of soils located in the highlands (>350 m a.s.l.), characterized by low hydraulic conductivity (<10⁻⁵ m s⁻¹) and low porosity (<25%). These soils are thick (several meters) and homogeneous without coarse components. Their clay fraction is considerable and dominated by gibbsite. The second group includes soils located in the low parts of the islands (<300 m a.s.l.). These soils are characterized by high hydraulic conductivity (>10⁻³ m s⁻¹) and high porosity (>35%). The structure of these soils is heterogeneous and includes coarse materials. The physical properties of the soils are in good agreement with the variations of the rainfall according to the elevation, which appears as the main factor controlling the soil development. The clayey alteration products constrain soils physical and hydrodynamic properties by reducing the porosity and consequently the permeability and also by increasing water retention.     

Heat capacity and phase equilibria of wadeite-type K2Si4O9

The low-temperature heat capacity (C _p) of Si-wadeite (K₂Si₄O₉) synthesized with a piston cylinder device was measured over the range of 5–303 K using the heat capacity option of a physical properties measurement system. The entropy of Si-wadeite at standard temperature and pressure calculated from the measured heat capacity data is 253.8 ± 0.6 J mol⁻¹ K⁻¹, which is considerably larger than some of the previous estimated values. The calculated phase transition boundaries in the system K₂O–Al₂O₃–SiO₂ are generally consistent with previous experimental results. Together with our calculated phase boundaries, seven multi-anvil experiments at 1,400 K and 6.0–7.7 GPa suggest that no equilibrium stability field of kalsilite + coesite intervenes between the stability field of sanidine and that of coesite + kyanite + Si-wadeite, in contrast to previous predictions. First-order approximations were undertaken to calculate the phase diagram in the system K₂Si₄O₉ at lower pressure and temperature. Large discrepancies were shown between the calculated diagram compared with previously published versions, suggesting that further experimental or/and calorimetric work is needed to better constrain the low-pressure phase relations of the K₂Si₄O₉ polymorphs. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

不同粘土矿物水敏性特征

通过改变砂样中的粘土矿物的种类和含量,结合咸淡水之间的单一和驱替实验,研究不同粘土矿物的水敏性特征。在单一的咸水和淡水情况下,当砂柱中的粘粒含量≤1.5%(重量比)时,其渗透系数基本不发生改变,即使粘粒含量从1.5%增加10%,其渗透系数也仅下降约一个数量级。各种粘土矿物中,蒙脱石导致含水介质渗透系数的下降最为明显,高岭土和伊利石约是其影响值的一半。咸淡水驱替实验中,加入蒙脱石颗粒的砂柱的渗透系数急剧下降,当蒙脱石含量达3~4%时,渗透系数已经下降的极低,可以看作不透水层,而加入高岭土和伊利石的砂柱的渗透系数没有急剧变化。对于这种现象的解释是:不同类型的粘土颗粒吸附不同数量的水分子,形成数量和大小不同的胶体团,使得介质渗透系数的变化量不同。     

南海温跃层基本特征及一维预报模式

根据现有1907—1990年南海大面调查资料,按1°×1°网格进行逐月的标准水层的温度统计。在此基础上采用3次样条函数的插值方法计算出整个南海温跃层的深度、厚度和强度并予以相应分析。分析表明,南海温跃层主要分为两种类型:第一类为辐射型,主要分布在南海北部的陆架区内,季节变化显著;第二类为不同水体叠置型,主要分布在广大深水区,它长年存在,季节变化较小。一种温跃层的一维积分预报模式,该模式是基于忽略热平流作用和水平热扩散的前提下,从局部热平衡方程出发,建立了受海面热收支及风混合作用下求解温度垂直分布及温跃层的时空变化。在南海北部水深约300m处进行了单站温跃层后报,结果表明,温跃层的深度、厚度和强度的相对误差均在30％以下。     

渤海、黄海、东海海面热量平衡的平均状况——Ⅰ.资料处理和计算方法

渤、黄、东海海面热量平衡状况对该海域海洋水文和中国气候有着重要的影响。我们对该海域热量平衡各分量的年平均和年变化进行了计算,并分别就资料处理和计算方法、年平均状况、年变化特征等几个方面进行了分析。本文作为该项研究的第一部分,讨论了所用的资料和计算公式,提出了在稳定温度层结条件下的交换系数的校正方法。     

黑潮区台风域海-气热输送量的计算

根据1972和1974年经过黑潮区的两个台风个例,计算和分析了台风各部位在不同的海气条件下热量输送的垂直分布特点。表明,在台风前部信风带中,热量垂直输送限于700hPa以下,在1000hPa处有约167.47—209.34J/(cm~2·h)的最大值,700hPa以上热量向下输送;在台风中心区,热量输送量最大,在1000hPa处接近420J/(cm~2·h),在850hPa附近可能有热输送量的最大值,其上随高度减小;在台风后部偏南气流中,向上热输送量较小;各层最大值不超过84J/(cm~2·h)。