CARBON DYNAMICS OF WETLAND IN THE SANJIANG PLAIN

1INTRODUCTIONWetlandsplayanimportant roleintheprocessofcar-bonstorage.Thetotalcarbonstoredindifferentkindsofwetlandsisabout15%-35%ofthetotalcarboninthegloballandsoils(POSTetal.,1982;GORHAM,1991).Inaddition,wetlandsaresignificantnaturalsources fortheatmospheric CH4 (MOORE,1994).It isestimatedthatabout110×1012gCH4 originates fromanaerobicdecompositioninthenaturalwetlands,CH4 emission fromthenaturalwetlandsis15%-30%oftheglobalCH4 emission andtheCH4 emission from thepeat land at hi…     

Magma Ascent and Crustal Accretion at Ultraslow-Spreading Ridges: Constraints from Plagioclase Ultraphyric Basalts from the Arctic Mid-Ocean Ridge

Plagioclase ultraphyric basalts (PUBs) with up to 54% plagioclasephenocrysts were dredged in the rift valley and adjacent flanksof the ultraslow-spreading Mohns and Knipovich ridges. The PUBsshow large variations in crystal morphologies and zoning. Thelarge variations suggest that single basalt samples containa mixture of plagioclase crystals that aggregated at differentlevels in the magma conduits. Resorbed crystals and repeatedreverse zones suggest that the magma reservoirs were replenishedand heated several times. Thin concentric zones with melt inclusions,and sharp reductions in the anorthite content of 3–7%,are common between the reverse zones. These zones, and skeletalcrystals with distinctly lower anorthite contents than massivecrystals, are interpreted to be the result of rapid crystalliztionduring strong undercooling. The changes between short periodsof cooling and longer periods with reheating are explained bymultiple advances of crystal-rich magma into cool regions followedby longer periods of gradual magma inflow and temperature increase.The porphyritic basalts are characterizd by more depleted andmore fractionated compositions than the aphyric basalts, withlower (La/Sm)_N, K₂O and Mg-numbers. This relationship, and theobservation that PUBs are sampled only close to segment centresalong these ridges, suggests that the PUBs formed by higherdegrees of melting and evolved in more long-lived magma reservoirs.We propose that the zoning patterns of plagioclase crystalsand crystal morphologies of these PUBs reflect the developmentand flow of magma through a stacked sill complex-like conduitsystem, whereas the aphyric equivalents represent later flowof magma through the conduit. The formation of voluminous higher-degreemelts may trigger the development of the magma conduits andexplain the generally depleted compositions of PUB magmas. KEY WORDS: basalt; mineral chemistry; MORB; magma mixing; magma chamber; major element     

Pressures of Crystallization of Icelandic Magmas

Iceland lies astride the Mid-Atlantic Ridge and was createdby seafloor spreading that began about 55 Ma. The crust is anomalouslythick (20–40 km), indicating higher melt productivityin the underlying mantle compared with normal ridge segmentsas a result of the presence of a mantle plume or upwelling centeredbeneath the northwestern edge of the Vatnajökull ice sheet.Seismic and volcanic activity is concentrated in 50 km wideneovolcanic or rift zones, which mark the subaerial Mid-AtlanticRidge, and in three flank zones. Geodetic and geophysical studiesprovide evidence for magma chambers located over a range ofdepths (1·5–21 km) in the crust, with shallow magmachambers beneath some volcanic centers (Katla, Grimsvötn,Eyjafjallajökull), and both shallow and deep chambers beneathothers (e.g. Krafla and Askja). We have compiled analyses ofbasalt glass with geochemical characteristics indicating crystallizationof ol–plag–cpx from 28 volcanic centers in the Western,Northern and Eastern rift zones as well as from the SouthernFlank Zone. Pressures of crystallization were calculated forthese glasses, and confirm that Icelandic magmas crystallizeover a wide range of pressures (0·001 to 1 GPa), equivalentto depths of 0–35 km. This range partly reflects crystallizationof melts en route to the surface, probably in dikes and conduits,after they leave intracrustal chambers. We find no evidencefor a shallow chamber beneath Katla, which probably indicatesthat the shallow chamber identified in other studies containssilica-rich magma rather than basalt. There is reasonably goodcorrelation between the depths of deep chambers (> 17 km)and geophysical estimates of Moho depth, indicating that magmaponds at the crust–mantle boundary. Shallow chambers (<7·1 km) are located in the upper crust, and probablyform at a level of neutral buoyancy. There are also discretechambers at intermediate depths (11 km beneath the rift zones),and there is strong evidence for cooling and crystallizing magmabodies or pockets throughout the middle and lower crust thatmight resemble a crystal mush. The results suggest that themiddle and lower crust is relatively hot and porous. It is suggestedthat crustal accretion occurs over a range of depths similarto those in recent models for accretionary processes at mid-oceanridges. The presence of multiple stacked chambers and hot, porouscrust suggests that magma evolution is complex and involvespolybaric crystallization, magma mixing, and assimilation. KEY WORDS: Iceland rift zones; cotectic crystallization; pressure; depth; magma chamber; volcanic glass     

Reduction of hydroelastic responses of a very-long floating structure by a floating oscillating-water-column breakwater system

The hydroelastic responses of a very-long floating structure (VLFS) placed behind a reverse T-shape freely floating breakwater with a built-in oscillating water column (OWC) chamber are analyzed in two dimensions. The Bernoulli–Euler beam equation is coupled with the equations of rigid and elastic motions of the breakwater and the VLFS. The interaction of waves between the floating rigid breakwater and the elastic VLFS is formulated in a consistent manner. It has been shown numerically that the structural deflections of the VLFS can be reduced significantly by a suitably designed reverse T-shape floating breakwater.     

Numerical study of the motions and drift force of a floating OWC device

The motion and the drift force of a floating OWC (oscillating water column) wave energy device in regular waves are studied taking account of the oscillating surface-pressure due to the pressure drop across the duct of the air chamber. The potential problem inside the chamber is formulated by making use of the Green integral equation associated with the Rankine-type Green function while the outer problem with the Kelvin-type Green function. The added mass, wave damping and excitation coefficients as well as the motion and drift force of the OWC device are calculated for various values of parameter related to the pressure drop.     

Mooring optimization of floating platforms using a genetic algorithm

This paper presents a new procedure for the optimization of the mooring design of floating platforms, in which an automatic design sequence is also established. Regarding the optimization philosophy, the following aspects are dealt with:

• The optimization of the platform heading and its mooring pattern, taking into account the environmental force spreading;

• optimum line length or line tension for each mooring line, associated to the optimization of the mooring line materials and sizes.

Basically, the main goal of this paper is to introduce a new method, which will provide the quickest way to find the best mooring system, defined here as that which minimizes platform responses.A genetic algorithm (GA) is applied in this contribution, and this paper describes exactly the procedure of developing a GA code directed toward the solution of mooring design optimization problems. In order to prove the efficiency and the vast potential of the proposed algorithm as a design tool, sample moorings are analyzed for different environmental conditions and the final results, including the time required to run them, are presented.     

汕尾市100kW波力电站空气透平与气室匹配设计

根据用1/15模型,在造波水槽中进行试验获得气室的Δ Pi- Q、ηA- Q、 NA- Q特性,以及用300mm透平模型,在1000mm活塞式往复流透平试验台进行试验获得的对称翼透平、双向固定导叶冲动透平和双向自调节导叶冲动透平的CP-、ηT-特性,进行了气室与三种空气透平的匹配设计。表明在设计波况下,采用1.025m的双向自调节导叶冲动透平时,ηT·ηA达50.43%;采用0.975m的双向自调节导叶冲动透平时,ηT·ηA达46.66%;采用0.975m的双向固定导叶冲动透平时,ηT·ηA达33.66%;采用1.45m对称翼透平时,ηT·ηA仅为29.9%。并对四种不同匹配方案进行了对比分析。     

On the estimation of mooring line characteristic resistance for reliability analysis

The main aim of this work is to derive a correct formulation for the characteristic resistance of a mooring line segment with lognormally distributed component resistances and substitute an equation proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] in a paper published in this journal, which is not correct. The mooring line is considered as a series system and the resistances of individual components of a line segment are statistically independent and identically distributed; furthermore, the case of normally distributed component resistances is also discussed. A comparison with the corresponding equation proposed by DNV-OS-E301 is given. Results show that the formula proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] overestimates quite significantly the characteristic resistance of a mooring line segment.     

Reliability-based comparative study for mooring lines design criteria

The characteristic environmental load effect for the design of mooring systems of floating units can be defined by means of three procedures: (a) the one associated to an extreme sea state with a given return period, (b) the worst one from a set of sea states on a contour line associated to a return period or (c) the extreme one based on response statistics for a long-term period. This work presents the result of a reliability-based partial safety factor calibration study for a LRFD mooring line design criteria considering the three approaches mentioned above. The calibration exercise is applied to three FPSOs considering North Sea environmental conditions and different water depths: 200, 800 and 3000 m. The mooring systems investigated take into account mooring lines made up of chains and polyester ropes. It is shown that, among all cases investigated, the design procedure based on the long-term response is the one that presents less scattered reliability indices around the target level.     

Response-based method for determining the extreme behaviour of floating offshore platforms

The accurate prediction of extreme excursion and mooring force of floating offshore structures due to multi-variete environmental conditions which requires the joint probability analysis of environmental conditions for the worst case situation is still impractical as the processing of large amount of met-ocean data is required. On the other hand, the simplified multiple design criteria (e.g. the N-year wave with associated winds and currents) recommended by API known as traditional method does lead neither to the N-year platform response nor to the N-year mooring force. Therefore, in order to reduce the level of conservatism as well as uncertainties involved in the traditional method the response-based method can be used as a reliable alternative approach. In this paper this method is described. In order to perform the calculations faster using large databases of sea states, Artificial Neural Networks (ANN) is designed and employed. In the paper the response-based method is applied to a 200,000 tdw FPSO and the results are discussed.