天气雷达数据处理系统人控应用软件

天气雷达用于抗灾和减灾很重要,本文提出一种人工降雨和驱冰雹软件,给出了程序流图,对编程的关键进行了分析,最后结果表明它能提高人控作业效率。     

Experimental solidification of anhydrous latitic and trachytic melts at different cooling rates: The role of nucleation kinetics

Two sets of cooling experiments were run at atmospheric conditions for two anhydrous starting latitic and trachytic melts: 1) five cooling rates (25, 12.5, 3, 0.5, and 0.125 °C/min) between 1300° and 800 °C, and 2) a 0.5 °C/min cooling rate from 1300 °C with quench temperatures at 1200°, 1100°, 1000° and 900 °C. Trachytic run-products are invariably glassy. Nucleation is also suppressed in the latitic run-products at the three highest cooling rates. Conversely, in the 0.5 and 0.125 °C/min runs, latites have a crystal content of  90 vol.%. The phases are: plagioclase, clinopyroxene, glass and iron-bearing oxide (in order of abundance). The variable quench temperatures, investigated by coupling experiments with Pt wire and Pt capsule sample containers in set 2, again did not produce crystallization of trachyte, whereas latitic samples are characterized by  10 vol.% of oxides, pyroxenes and plagioclase (in order of appearance), at temperature < 1000 °C. Effects of (preferential) heterogeneous nucleation on sample holders, of superheating degree, and chemical species loss during cooling are absent for both melt compositions. The difference of solidification paths between these two silicate melts can be ascribed only to their small chemical differences. In comparison with calculated equilibrium conditions all the experimental latitic and trachytic run-products revealed strong kinetic effects, interpretable in the light of the nucleation theory. The glass-forming ability (GFA) of trachyte is higher, whereas their critical cooling rate (Rc) is lower (< 0.125 °C/min), in comparison to latitic melts (Rc > 0.5 °C/min). The experimental results carried out in this study can be applied to lava flows and domes; trachytic lavas are able to flow for longer period with respect to latitic ones in a metastable condition. Glass-rich terrestrial lavas, i.e. obsidians, can be the result of sluggish nucleation kinetics due to the relative high polymerisation of evolved silicate melts.     

Dynamic analysis of a vertical plate exposed to breaking wave impact

From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of p_max/γH₀≤18.     

东海区近海强风预报模式

本文探讨东海区近海强风预报模式，首先介绍建立预报模式的思路和步骤，及使用说明，为了验证强风预报模式和判别条件，用１９８６、１９８７上日本传真天气图进行试报，准确和基本准确度为９１．１％，并给出了１９８９、１９９５年随船试验预报结果，准确和基本准确率为９０％以上。     

0421号热带风暴"海马"登陆前后环境场对其移向和强度影响的分析

0421号热带风暴“海马(Haima)”于2004年9月13日12:00在浙江省温州市沿海登陆,登陆后迅速减弱为热带低压,20:00在浙江境内消失.本研究采用物理量诊断分析法,探讨该热带风暴登陆前后涡度场、湿焓场变化对其移向和强度的影响.结果表明,该热带风暴登陆后,涡度(ξ)明显减弱.涡度局地变化(ξ/t)值分布显示,风暴移动方向的后方,涡度减弱的趋势比前方涡度增大的趋势更剧烈;风暴有向其外围(ξ/t)正值中心(即涡度增幅最大)移动的趋势.该热带风暴登陆前、后,湿焓都增大,但登陆后湿焓增大趋势已大大减弱;风暴有向湿焓局地变化(E/t)正值中心移动的趋势,即向能量增强最大的方向移动.     

On dynamic coupling effects between a spar and its mooring lines

The responses of a spar constrained by slack mooring lines to steep ocean waves and tensions in the mooring lines are simulated using two different numerical schemes: a quasi-static approach (SMACOS) and a coupled dynamic approach (COUPLE). The two approaches are the same in computing wave loads on the structure. Their difference is in modeling dynamic forces of mooring lines; that is the dynamic forces are included in the computation of COUPLE but neglected in SMACOS. The numerical simulation is examined against the laboratory measurements of the JIP Spar in a water depth of 318 m. The dynamic coupling effects between the JIP Spar and its mooring lines in different water depths (318, 618 and 1018 m) are investigated by the comparison of numerical simulations obtained using the quasi-static and coupled dynamic approaches. It is found that the damping of mooring lines reduces the slow-drift surge and pitch of the Spar, especially in deep water. The reduction in the amplitude of slow-drift surge can reach about 10% in a water depth of 1018 m. The tension in mooring lines may greatly increase in the wave frequency range when dynamic forces in mooring lines are considered. The mooring-line tension in the wave frequency range predicted by the coupled dynamic approach can be eight times as great as the corresponding prediction by the quasi-static approach in a water depth of 1018 m. This finding may have important implications for the estimation of the fatigue strength and life span of the mooring lines deployed in deep water oceans.     

定位卫星轨道监视系统研究

与卫星测控中心的卫星轨道参数相比,地球同步卫星定位系统中轨道计算子系统所计算出的卫星星历数据具有实时性强、精度高的特点,如何有效利用该星历数据来分析卫星轨道运行情况是该领域的一个热门研究课题。在介绍卫星轨道测定法的基础上,提出了以卫星速度变化率和卫星星下点为主要监视内容的卫星轨道监视系统,通过系统的试运行结果可以看出,该系统能够有效地监视卫星的瞬时和长期运行情况,为卫星的在轨运行管理提供了一种直观、形象的监视方法。     

基于IGS超级跟踪站的近实时GPS气象研究及应用

目前国内许多城市开始将CORS综合应用网服务于气象部门,为给地基GPS气象研究人员提供一个真实的研究环境,本文基于IGS超级跟踪站网络搭建了一个近实时GPS气象系统,并结合实测数据验证了该系统的有效性。基于该平台可以系统地研究GPS遥感水汽、层析水汽三维分布、数值天气预报同化GPS水汽以及利用电离层分布进行空间天气预报等理论。     

ANALYSIS OF A CASE OF EAST ASIA COASTAL CYCLOGENESIS*

The evolution of an explosive cyclone off the East Asia coast in March 1979 is described.A shortwave trough in the southern branch of upper-level westerlies initiated the incipient cyclone.Later,a polar trough in the north amplified and became in phase with the southern shortwave to form a major trough.This major trough was responsible for the rapid intensification of the surface cyclone.In the early development stage,warm and moist air was transported northward to the developing area by a strong low-level jet.The ageostrophic wind associated with the low-level jet contributed to the frontogenesis,creating a favorable low-level environment for the rapid deepening.A low-level positive potential vorticity anomaly was created prior to the onset of rapid deepening.It was a result of frontal cloud condensation.The cyclone intensified rapidly when stratospheric air with high potential vorticity penetrated to the mid-troposphere.The rapid deepening took place at a location under the left-exit region of an amplifying jet streak behind the major trough and the right-entrance region of another anticyclonically-curved subtropical jet streak in a quasi-stationary ridge overJapan.Due to the blocking effect of the Tibetan Plateau,two shortwave disturbances were observed in the upper-level westerlies on the north and south sides of the Plateau.The southern disturbance initiated the incipient surface cyclone,while the amplifying northern disturbance was responsible for the rapid deepening.Thus,the evolution of the explosive cyclone in this case can be regarded as consecutive Petterssen's "type-B" cyclogenesis in two separate stages.     

Ductile deformation of garnet in mylonitic gneisses from the Münchberg Massif (Germany)

Mylonitic gneisses from the Münchberg Massif contain single grains (type I) and polycrystalline aggregates (type II) of garnet displaying a distinct elongation parallel to a macroscopic lineation which is interpreted as the result of ductile deformation. Lattice-preferred orientations of quartz (textures) symmetrical to the macroscopic foliation and lineation and the lack of rotational microfabrics indicate that the bulk deformation was pure shear at least during the latest strain increments. Garnet textures measured by EBSD together with microprobe analyses demonstrate that these two structural types of garnet can be related to two different processes of ductile deformation: (1) For the single grains stretching can be attributed to diffusion creep along grain boundary zones (Coble creep). The related mass transfer is indicated by the fact that primary growth zones are cut off at the long faces of the grains while the related strain shadow domains do not show comparable chemical zoning. Pressure solution and precipitation suitable to produce similar structures can be largely ruled out because retrogressive reactions pointing to the presence of free hydrous fluids are missing. (2) For the polycrystalline garnet aggregates consisting of cores grading into fine-grained mantles, dislocation creep and associated rotation recrystallization can be assumed. Continuous lattice rotation from the core to the outer polycrystalline rim allow a determination of the related dominant slip systems which are {100}<010> and equivalent systems according to the cubic lattice symmetry. The same holds for garnets which appear to be completely recrystallized. For this type of fine-grained aggregates an alternative nucleation model is discussed. Due to penetrative dislocation glide in connection with short range diffusion and the resulting lattice rotation, primary growth zones are strongly disturbed.Since for the considered rock unit of the Münchberg Massif peak metamorphic temperatures between 630 and 670 °C can be assumed, this study clearly demonstrates that the inferred processes of ductile garnet deformation can occur not only in HT regimes as often suggested in the literature even if embedded within a matrix of “low-strength” minerals like quartz, feldspars and micas.