An unsteady wave driver for narrowbanded waves: modeling nearshore circulation driven by wave groups

In this paper, we derive an unsteady refraction–diffraction model for narrowbanded water waves for use in computing coupled wave–current motion in the nearshore. The end result is a variable coefficient, nonlinear Schrödinger-type wave driver (describing the envelope of narrow-banded incident waves) coupled to forced nonlinear shallow water equations (describing steady or unsteady mean flows driven by the short-wave field). Comparisons with experimental data show that good accuracy can be obtained for cases of nonbreaking wave transformation. Numerical simulations show that the interaction of wave groups with longshore topographic nonuniformities generates strong edge wave resonances, providing a generating mechanism for low-order edge waves.     

A hybrid indirect boundary element—discrete wave number method applied to simulate the seismic response of stratified alluvial valleys

A hybrid indirect boundary element – discrete wavenumber method is presented and applied to model the ground motion on stratified alluvial valleys under incident plane SH waves from an elastic half-space. The method is based on the single-layer integral representation for diffracted waves. Refracted waves in the horizontally stratified region can be expressed as a linear superposition of solutions for a set of discrete wavenumbers. These solutions are obtained in terms of the Thomson–Haskell propagators formalism. Boundary conditions of continuity of displacements and tractions along the common boundary between the half-space and the stratified region lead to a system of equations for the sources strengths and the coefficients of the plane wave expansion. Although the regions share the boundary, the discretization schemes are different for both sides: for the exterior region, it is based on the numerical and analytical integration of exact Green's functions for displacements and tractions whereas for the layered part, a collocation approach is used. In order to validate this approach results are compared for well-known cases studied in the literature. A homogeneous trapezoidal valley and a parabolic stratified valley were studied and excellent agreement with previous computations was found. An example is given for a stratified inclusion model of an alluvial deposit with an irregular interface with the half-space. Results are displayed in both frequency and time domains. These results show the significant influence of lateral heterogeneity and the emergence of locally generated surface waves in the seismic response of alluvial valleys.     

Interaction of cnoidal waves with an array of vertical concentric porous cylinders

An array of large concentric porous cylinder arrays is mounted in shallow water exposed to cnoidal waves. The interactions between waves and cylinders are studied theoretically using an eigenfunction expansion approach. Semi-analytical solutions of hydrodynamic loads and wave run-up on each cylinder are obtained using first approximation to cnoidal waves. The square array configuration of four-legged identical concentric porous cylinder is investigated in present study. Numerical results reveal the variation of dimensionless wave force and wave run-up on individual cylinder with angle of incidence, porosity parameter, spacing between outer and inner cylinders, spacing between concentric porous cylinders and wave parameter. Different mechanism of wave force is found under different range of scattering parameter.     

Sediment transport patterns at Trafalgar offshore windfarm

A simple analytical model of wave propagation has been developed in order to study the potential sediment transport patterns due to the action of currents and waves in the neighborhood of cylindrical structures as well inside a group of these structures. The attention is focused on the study of Trafalgar offshore windfarm, a case in which it has been necessary to analyze the flow trough porous structures in order to model fish growing-cages planned to be installed at each aerogenerator structure. The results are obtained by averaging over one period of wave in order to evaluate the net potential sediment transport. The analysis of the results reveals how the processes of wave diffraction and reflection give rise to periodic patterns of sediment transport around and between the structures.     

亮点周围的衍射模式

将衍射问题研究中的回波解析奇性归结为探讨含参量的振荡积分的渐近性态问题，并利用广义函数的算子理论，以十分简捷的方式给出了上述振荡积分的稳定位相公式，以及结合Ｔｈｏｍ理论逐一地算出非退化奇点、岐点和脐点周围的衍射模式．     

随县-马鞍山地带地壳与上地幔结构及郯庐构造带南段的某些特征

本义利用1979-1981年中国科学院地球物理研究所在随县-马鞍山所做的人工源地震探测的资料,采用二维射线追踪来拟合地震波的走时和振幅,取得了该地带的地壳与上地慢速度结构.结果表明,该地带地壳厚度为32-37km,莫霍面起伏变化显著.地壳速度的横向变化甚为强烈,地壳中部存在低速层.在巢湖以西宽数10km的范围内,地壳结构与其它地方明显不同,上地壳速度明显偏高,莫霍面上隆并有间断;在其两侧,明显可见有两条深断裂.结合其它地球物理场特征及大地构造概况,对结果进行分析,认为郯庐构造带南段被两条深断裂所夹,构造带宽度可达数10km,并在地质历史时期曾有过地幔物质上涌.     

云南思茅—中甸地震剖面的地壳结构

云南思茅—中甸宽角反射/折射地震剖面切割松潘—甘孜、扬子和华南三个构造单元的部分区域. 我们利用初至波和壳内反射波走时层析成像获得地壳纵波速度结构. 在获得新的地壳速度结构模型基础上，利用地震散射成像思想和低叠加次数的叠前深度偏移方法重建了研究区的地壳、上地幔反射结构. 综合分析研究区地壳P波速度模型和壳内地震反射剖面发现：沿测线从北至南地壳厚度从约50 km减薄至35 km左右，地壳厚度的减薄量主要体现在下地壳，剖面北段下地壳厚度约为30 km，剖面南段下地壳厚度仅为15 km左右；上地幔顶部局部位置P波速度值偏低，一般为76～78 km/s，反映出云南地区是典型的构造活动区的特点.剖面沿线地壳内地震反射发育，其中莫霍强反射出现在景云桥下方；在景云桥弧形断裂带8～10 km深处出现宽约50 km的强反射带.     

太阳光谱望远镜散射光初步测定

报告了云南天文台太阳光谱望远镜散射光的测定,用零级光谱测定仪器轮廓的方法得到白光散射光最大为８％,平均为５％,估计光路系统改进后仪器散射光将减少。     

A dense array experiment for the observation of waveform perturbations

We analyze observed three-component seismograms recorded by a dense array of 21 short-period receivers (f>2 Hz) installed on a homogeneous Quaternary plain with 1.5×3.5 km² horizontal dimensions. The experiment was conducted in the district of Caille, in SE France for 3 months. The observed waveform data are related to diffraction and refraction of the direct wavefield by different geological structures and topographic morphologies surrounding the array. The origin of the coda energy following the energetic Pg or Sg arrivals is either influenced by heterogeneities close to and inside of the valley, for instance thrust of Jurassic limestones over Cretaceous marls in the northern and southern limits of the valley, or by heterogeneities located outside of the valley such as the interface unconformity between crystalline basement and sedimentary cover in the northern border of the Maures–Tanneron ranges. The main energetic arrivals of the seismograms arrive at the array with a definite range of azimuths that is not correlated with the event back-azimuth. Moreover, these arrivals do not appear with azimuths related to the characteristic NS and EW valley orientations, and thus may be related to heterogeneities located outside of the valley.     

红外光谱/扫描电镜等现代大型仪器岩石矿物鉴定技术及其应用

传统的光学显微镜由于分辨率、放大倍数的限制,对于细微颗粒的定性分析不准确,矿物的定量分析存在一定的误差,对纳米-微米级矿物形貌及结构特征的观察束手无策。随着油气勘探及地质找矿的不断深入,需要提供岩石中所有矿物、孔隙及微量元素的信息,因此整合傅里叶红外光谱仪、X射线衍射仪、拉曼光谱仪、扫描电镜的优点,建立以大型仪器为基础的岩石矿物鉴定方法是当前地质工作的需要。红外光谱光谱范围为7500~370 cm-1,能对固、液、气样品中含量高于30%的矿物进行快速、准确的定性分析;主要用于有机质分析,其次还可对部分具有极性键的无机化合物及金属氧化物进行分析。X射线衍射仪能快速地对样品中含量大于15%的矿物进行较为准确的定量分析;现今主要用于各类晶质矿物的定性分析,同时也可对碳酸盐岩矿物等不含水矿物进行定量分析。拉曼光谱仪光谱范围为200~1000 nm,空间分辨率为横向0.5μm、纵向2μm,通过对包裹体进行测试能直接获得成岩过程中的温度、压力、流体成分等信息;目前主要用于流体包裹体成分的测试,其次还可对分子极化度会发生变化的液态、粉末及固体样品进行定性分析。扫描电镜分辨率达到1 nm,能清晰地观察到纳米-微米级矿物的形貌特征及矿物的结构特征;主要用于纳米-微米级的任何非磁性固体矿物的形貌及相关关系的观察。通过大型仪器建立的岩石矿物鉴定方法具有更高的分辨率,显著地提高了岩矿鉴定的精准度,大大拓宽了岩矿鉴定的范围(如鉴定纳米/微米级的矿物、矿物的不同变种等),能够全面、精准地提供岩石矿物的矿物含量和矿物组成、客观准确的成岩作用信息、清晰的矿物微观形貌及结构特征,而且仪器功能相互重叠,测试结果相互验证,保证了测试结果的可靠性。与传统光学显微镜鉴定方法相比,现代大型仪器岩石矿物鉴定技术为揭示矿物间的共生、反应、演化、岩石的成因、沉积/成岩环境等提供了依据,为地质工作提供准确、全面的矿物定性定量、组构特征及成岩作用等信息,为地质工作的顺利完成奠定了坚实的基础。