Size and shape evolution of pores in a viscoplastic matrix under compression

The frequent use of soils and earth materials for hydraulic capping and for geo‐environmental waste containment motivated our interest in detailed modelling of changes in size and shape of macro‐pores to establish links between soil mechanical behaviour and concurrent changes in hydraulic and transport properties. The objective of this study was to use finite element analysis (FEA) to test and extend previous analytical solutions proposed by the authors describing deformation of a single macro‐pore embedded in linear viscoplastic soil material subjected to anisotropic remote stress. The FEA enables to consider more complex pore geometries and provides a detailed picture of matrix yield behaviour to explain shortcomings of approximate analytical solutions. Finite element and analytical calculations agreed very well for linear viscous as well as for viscoplastic materials, only limited for the case of isotropic remote stress due to the simplifications of the analytical model related to patterns and onset of matrix‐yielding behaviour. FEA calculations were compared with experimental data obtained from a compaction experiment in which pore deformation within a uniform modelling clay sample was monitored using CAT scanning. FEA predictions based on independently measured material properties and initial pore geometry provided an excellent match with experimentally determined evolution of pore size and shape hence lending credence to the potential use of FEA for more complex pore geometries and eventually connect macro‐pore deformation with hydraulic properties. Copyright © 2006 John Wiley & Sons, Ltd.     

Origin of short period comets

Reasons for interest in the origin of short-period comets and the difficulties of computing their long-term dynamcal evolution are reviewed. The relative advantages of a source region in an extended inner core of the Oort cloud or a compact comet belt just beyond the planetary system are finely balanced, and it is premature to consider the problem solved. A complication is that some comets belonging to the Jupiter family may be part of a time-dependent system, possibly the remains of a giant comet such as Chiron which could have been part of the system 104 yr ago. The origin of short-period comets plays a pivotal role in many areas of solar system science: planet formation, the source of water (possibly life) on the terrestrial planets, the cratering record on the terrestrial planets and satellites of the outer planets, and the environmental impact posed by massive bodies and their decay products in the Earth's near-space environment.     

不同激光扫描数据组拼接的一种新方法

激光扫描测量技术在三维城市建模领域的应用具有良好的发展前景。但是,不同精度的扫描数据组的拼接是目前需要解决的主要问题之一,本文对不同精度的数据组的拼接进行了实验性研究,并提出了一种新方法。     

3D characterization of coarse aggregates

A new and accurate characterization method for dimensions, shape and roughness of aggregate particles has been developed. The method is based on the 3D-laser scanning technique and evaluation of coarse-grain aggregate-particle images. Parameters are obtained with either analytical Fourier analysis or geometrical analysis. The results from the two methods are compared with each other as well as with manual measurements. Although the Fourier-based analysis gives about 10% smaller size values, the comparison of the results shows, in general, a good agreement between the different techniques. This new method for analysis of coarse-grain aggregates gives reliable results for both the shape and topographical parameters of particles.     

2002年CT扫描和三维成像学术年会评述

由CT理论与应用研究编辑部和北京信息工程学院主办、有中国体视学学会多位理事和会员参加的“2002年CT扫描和三维成像研讨会（CT科技学术年会）”于2002年10月18－20日，在北京大学逸夫苑理科楼学术报告厅举行。中国体视学学会副理事长刘国权教授出席致辞，对于这次CT科技年会的召开表示祝贺，并介绍了2003年在美国圣迭戈和北京将要召开第11届国际体视学会大会的有关情况，希望有关专家准备论文出席，来自全国各地48位专家，教授出席了会议，本次会议涉及CT理论、计算方法和软件及硬件技术；医学CT扫描成像和疾病诊断；工业CT和三维成像：地球层析和工程CT。美国爱荷华大学王革教授，纽约罗彻斯特大学宁若拉教授专程到会，分别做了精彩的特邀主题报告：显微CT的锥束重建新方法和近年来在这方面的进展和展望”，“锥光束三维CT技术在美国的过去、现在和未来”“国内专家也报告了前沿研究的新成果，在会前，CT理论与应用研究编辑部，根据收到的论文和摘要汇编和印制了专集，在会议最后一天，召开了“CT理论与应用研究”期刊编委会，传达了中国科协对于办好科技期刊的新要求，会议开得很成功。     

图像处理技术在地质灾害监测中的应用

三维激光微位移监测技术是一种对地质灾害进行长期监测的新方法。该技术用激光作为光源，用CCD摄像器作为镜头，通过图象采集卡把视频信号采入计算机中，用与该仪器配套的专门软件对采集到的光斑图像进行处理，计算出光斑的三维中心坐标值，把该值和原点坐标值进行比较，就可以算出灾害体滑动的距离。该系统可以对灾害体进行长期、非接触监测，监测时间、监测频率可以任意设定。文章概括介绍该监测的原理，各个组成部分，重点介绍软件部分，即采集的视频信号进入计算机后的图像处理过程和数据库结构。该监测系统已在三块地区试运行了3个月，效果较好。     

Preliminary Results from a New 157 nm Laser Ablation ICP-MS Instrument: New Opportunities in the Analysis of Solid Samples

Preliminary results are given from an excimer 157 nm laser ablation multiple-collector inductively coupled plasma-mass spectrometer (LA-MC-ICP-MS), used for the isotopic measurements of solid materials. Elements of geological interest with different volatilities such as Pb and U (e.g. zircon geochronology) and Cu and Zn (as examples of geochemical/biochemical tracers) were analysed. The range of ablation rates of 20-150 nm s^-1 enabled us to ablate the sample down to a depth of 45 μm for a 50 μm diameter pit. The Cu and Zn isotopic measurements gave values that were very stable with, on average, a 0.01 % standard error, comparable with that achieved in liquid mode measurements.     

鄂尔多斯盆地中生代晚期以来大地热流的变化及其对生态环境格局和演变的影响

鄂尔多斯盆地的西北部、东北部和南部三个区域现今大地热流平均值分别为56．3、67．3和65．3mW／m^2，对应的生态环境格局也有明显的差异。研究表明，大地热流每增加4～5mW／m^2可使年均地表温度升高约l℃，使最低月均地表温度升高2。C以上。鄂尔多斯盆地东北部的平均大地热流比西北部高出11mW／m^2，东北部年均地表温度可能比西北部高出2～3℃，其最低月均地表温度可能比西北部高出4～6℃。西北部的大地热流平均值已经低于维持地表生态系统延续所需大地热流的临界值(57mW／m^2)，其自然生态系统整体上已经处于脆弱境地；东北部和南部的大地热流均大于57mW／m^2，自然生态系统均尚较稳健。东北部的沙漠化可能是风沙侵入的结果，其生态应该是可以恢复的。整个西北部作为一个整体看，72万年以前大地热流就已衰减到临界值以下，区域生态系统渐趋脆弱，开始整体上向荒漠化演变。     

基于扫描矢量化地图数据生产的数据质量控制

概述了基于扫描矢量化GIS数据的生产过程 ,介绍了扫描矢量化质量控制的策略和方法 ,在地图扫描阶段采用栅格图纠正的方法对地图的变形进行纠正 ,以提高矢量化原图的质量 ,在基于扫描矢量化GIS数据的生产过程中 ,可从算法和软件使用工艺方面提高数据的质量