Use of multi‐platform,multi‐temporal remote‐sensing data for calibration of a distributed hydrological model: an application in the Arno basin,Italy

Images from satellite platforms are a valid aid in order to obtain distributed information about hydrological surface states and parameters needed in calibration and validation of the water balance and flood forecasting. Remotely sensed data are easily available on large areas and with a frequency compatible with land cover changes. In this paper, remotely sensed images from different types of sensor have been utilized as a support to the calibration of the distributed hydrological model MOBIDIC, currently used in the experimental system of flood forecasting of the Arno River Basin Authority. Six radar images from ERS‐2 synthetic aperture radar (SAR) sensors (three for summer 2002 and three for spring–summer 2003) have been utilized and a relationship between soil saturation indexes and backscatter coefficient from SAR images has been investigated. Analysis has been performed only on pixels with meagre or no vegetation cover, in order to legitimize the assumption that water content of the soil is the main variable that influences the backscatter coefficient. Such pixels have been obtained by considering vegetation indexes (NDVI) and land cover maps produced by optical sensors (Landsat‐ETM). In order to calibrate the soil moisture model based on information provided by SAR images, an optimization algorithm has been utilized to minimize the regression error between saturation indexes from model and SAR data and error between measured and modelled discharge flows. Utilizing this procedure, model parameters that rule soil moisture fluxes have been calibrated, obtaining not only a good match with remotely sensed data, but also an enhancement of model performance in flow prediction with respect to a previous calibration with river discharge data only. Copyright © 2006 John Wiley & Sons, Ltd.     

现代天文选址中的视宁度（Ⅱ）

在文献」１「４ 基础上，根据近年文选址实践中提出的问题，先进一步讨论了大气相干直径和时间的的物理和意义，然后强调了自由大气湍流的天文成像效应及选址中进行研究和测量的重要性。最后对差分像运动方法测量视宁度的定标和系统误差等问题作了分析。     

Late Quaternary landscapes in Central Australia: sedimentary history and palaeoecology of Puritjarra rock shelter

Puritjarra rock shelter provides a long record of late Quaternary vegetation in the Australian arid zone. Analysis of the sedimentary history of this rock shelter is combined with reanalysis of charcoal and phytolith records to provide a first‐order picture of changing landscapes in western Central Australia. These show a landscape responding to increasing aridity from 45 ka with deflation of clay‐rich red palaeosols (<45 ka) and sharp declines in grassland and other vegetation at 40–36 ka, and at the beginning of the Last Glacial Maximum (LGM) (24 ka). Vegetation in the catchment of the rock shelter recovered after 15 ka with expansion of both acacia woodland and spinifex grasslands, registering stronger summer rainfall in the interior of the continent. By 8.3 ka re‐vegetation of local palaeosols and dunes had choked off sediment supply to the rock shelter and the character of the sediments changed abruptly. Poaceae values peaked at 5.8 ka, suggesting the early–mid Holocene climatic optimum in Central Australia is bracketed between 8.3 and 5.8 ka. Local vegetation was disrupted in the late Holocene with a sharp decline in Poaceae at 3.8 ka, coinciding with an abrupt intensification of ENSO. Local grasslands recovered over the next two millennia and by 1.5 ka the modern vegetation appears to have become established. Copyright © 2009 John Wiley & Sons, Ltd.     

基于荧光原理的叶绿素a传感器校准方法研究

利用传感器对水体叶绿素a 浓度进行原位测量是获取实时、连续、长时间序列数据的重要手段。本文在对RBR 传感器和ECO（Environmental Characterization Optics）传感器进行原理分析和线性度、稳定性、重复性等基本性能测试的基础上，利用单一藻种培养液和2020年南海北部海域现场数据校准传感器，并对新的传感器校准系数进行验证。结果表明：两台传感器使用新系数比原出厂系数的叶绿素a 浓度测量准确度有明显提高。RBR 传感器现场数据校准系数的计算结果与叶绿素a 标准值误差最小，平均绝对误差从1.93 μg/L 减小到0.35 μg/L，平均相对误差从55.1%减小到10.9%；ECO 传感器藻液系数明显优于出厂系数和现场数据校准系数的计算结果，平均绝对误差从1.76 μg/L 减小到0.59 μg/L，平均相对误差从50.3%减小到15.1%。传感器测量准确度的提高，可为海洋环境监测、海洋生态灾害预警等工作获取真实可靠数据提供支撑。     

Site Effects Study in the Serravalle Village (NE Italy) by Means of Spectral Ratios Analyses Relatively to Multiple Reference Sites

The area of Serravalle, sited in the northern part of the town of Vittorio Veneto (TV), NE Italy, has been the target of a seismic microzonation campaign. 10 seismic stations have been deployed for a 7 months period to record in continuous mode. Three stations were installed on bedrock outcrops and seven on sedimentary sites with variable cover thickness. Spectral analyses have been performed on the collected data-set using the Generalized Inversion Technique (GIT, e.g. Andrews, 1986). In particular, spectral ratios have been calculated for each station relatively to the average of the three reference, bedrock sites. The spectral ratios provide quantitative estimates of the seismic motion amplifications which occur in each of the monitored sites. Two sites show high values of amplification, 5 times larger than signal amplitude at the reference sites, in correspondence of well discernible peak frequencies of 5 Hz. Results for the other stations show smaller amounts of site amplification spreading over a broad range of frequencies. Sites where the highest amplifications were recorded all lie on the left bank of the Meschio River and in areas farther away from its outlet into the plain correlating with the presence of thick layers of Quaternary deposits.     

Inelastic dynamic analysis of RC bridges accounting for spatial variability of ground motion,site effects and soil–structure interaction phenomena. Part 1: Methodology and analytical tools

During strong ground motion it is expected that extended structures (such as bridges) are subjected to excitation that varies along their longitudinal axis in terms of arrival time, amplitude and frequency content, a fact primarily attributed to the wave passage effect, the loss of coherency and the role of local site conditions. Furthermore, the foundation interacts with the soil and the superstructure, thus significantly affecting the dynamic response of the bridge. A general methodology is therefore set up and implemented into a computer code for deriving sets of appropriately modified time histories and spring–dashpot coefficients at each support of a bridge with account for spatial variability, local site conditions and soil–foundation–superstructure interaction, for the purposes of inelastic dynamic analysis of RC bridges. In order to validate the methodology and code developed, each stage of the proposed procedure is verified using recorded data, finite‐element analyses, alternative computer programs, previous research studies, and closed‐form solutions wherever available. The results establish an adequate degree of confidence in the use of the proposed methodology and code in further parametric analyses and seismic design. Copyright © 2003 John Wiley & Sons, Ltd.     

Empirical correlations of soil parameters based on Cone Penetration Tests (CPT) for Greek soils

This study presents the results of Cone Penetration Tests (CPT) and estimated correlations with the results of other in-situ tests (standard penetration test, cross-hole, seismocone) and laboratory tests (classification and undrained shear strength tests). These tests cover nearly all types of penetrable soils in Greece and, together with the formulation of empirical correlations, complement and improve on previous studies due to the significant number of CPT measurements.     

ADAPT数字遥测地震台网中传递函数的辨识

Adapt系统可以利用脉冲标定波形得到系统的传递函数，它将复杂的传递函数计算过程简化了，用户可以将传递函数的测定作为一种日常工作来做。