Fully coupled elastoplastic hydro-mechanical analysis of unsaturated porous media using a meshfree method

This paper presents the first application of an advanced meshfree method, ie, the edge-based smoothed point interpolation method (ESPIM), in simulation of the coupled hydro-mechanical behaviour of unsaturated porous media. In the proposed technique, the problem domain is spatially discretised using a triangular background mesh, and the polynomial point interpolation method combined with a simple node selection scheme is adopted for creating nodal shape functions. Smoothing domains are formed on top of the background mesh, and a constant smoothed strain, created by applying the smoothing operation over the smoothing domains, is assigned to each smoothing domain. The deformation and flow models are developed based on the equilibrium equation of the mixture, and linear momentum and mass balance equations of the fluid phases, respectively. The effective stress approach is followed to account for the coupling between the flow and deformation models. Further coupling among the phases is captured through a hysteretic soil water retention model that evolves with changes in void ratio. An advanced elastoplastic constitutive model within the context of the bounding surface plasticity theory is employed for predicting the nonlinear behaviour of soil skeleton. Time discretisation is performed by adopting a three-point discretisation method with growing time steps to avoid temporal instabilities. A modified Newton-Raphson framework is designed for dealing with nonlinearities of the discretised system of equations. The performance of the numerical model is examined through a number of numerical examples. The state-of-the-art computational scheme developed is useful for simulation of geotechnical engineering problems involving unsaturated soils.     

用双三次样条函数和GPS资料反演现今中国大陆构造形变场

将中国大陆现今构造变动视为一种连续的地壳变形,利用双三次样条函数模拟了近期GPS测定的大陆内部及周边地区412个测站速率,反演大陆地区自洽的构造变动速度场和应变率场.模拟结果显示:印度板块与欧亚板块的碰撞、挤压是构成中国大陆内部岩石层水平形变的主要驱动力.印度板块在东喜马拉雅构造结深深插入青藏高原,造成地壳大规模的缩短和抬升.青藏高原东南部的喜马拉雅带、拉萨和羌塘地块以及青藏高原东南边的川滇地区,内部构造活动强烈,其内部的构造变形包含地壳碎片的冲断、褶皱和侧向逃逸.大陆地壳(或岩石圈)的增厚,尤其是喜马拉雅山脉南北向的快速缩短和青藏高原东西向的缓慢拉张,大约吸收了印欧板块会聚量的85%,西藏中东地区东西向的拉张速率达到了(16±2.0)mm/a,且顺时针方向扭转明显.印度板块相对欧亚板块运动的欧拉极为(29.7°N, 19.3°E, 0.392°/Ma);华南地块相对于欧亚大陆向东(102°±7.4°)南的运动速率是(11±1.54)mm/a,华南块体相对欧亚板块运动的欧拉极为(62.25°N, 126.56°E, 0.141°/Ma);塔里木地块相对较稳定,其西部运动速度高于东部运动速度,作顺时针方向旋转.总体上讲,中国大陆运动方向为北偏东呈辐射状,从西部近南北方向的运动转向东部地区东南方向的运动,绕东喜马拉雅构造结有一顺时针方向的旋转.横穿喜马拉雅构造带及青藏内部的南北向压缩速率为(19±2.0)mm/a,横穿西天山构造带的南北向压缩平均速率为(13±1.5)mm/a,横穿东天山构造带的南北向压缩平均速率为(6.0±1.4)mm/a.阿尔金断裂带的左旋走滑速率为(6±1.2)mm/a.     

SAMPLING REMOTELY SENSED IMAGERY FOR STORAGE,RETRIEVAL, AND RECONSTRUCTION*

A major difficulty in remote sensing is handling the many data from sensors aboard aircraft and satellites. In this paper we identify an optimal procedure for sampling remotely sensed data before their storage or on their retrieval. The procedure depends on spatial correlation in the scene and uses kriging to estimate values that have been lost. An example in which data from an airborne multispectral scanner could be diminished to only about one tenth without serious loss of precision illustrates the method.     

重力插值方法研究

为了根据离散观测数据构制连续空间重力变化图像，分析和讨论了３种数值插值方法，计算结果表明多面函数方法插值精度最高。由于逐步回归分析筛选核函数中心点的计算繁琐，文中提出根据分形理论和Ｓｈａｎｎｏｎ取样定理来确定核函数中心点。对滇西试验场进行模拟试算，插值精度可达到４～５（１０－８ｍｓ－２）。     

抗差估计的初值选择

对L1 范估计的平差值和LS估计的平差值作为抗差估计的初值进行了比较 ,指出在 ρ函数是严凸函数时 ,二者无明显的区别。因为LS估计简单且易于计算 ,因此建议用LS估计的平差值作为抗差估计的初值。     

珠江口外陆架表层沉积物的地球化学分区

根据249个表层沉积物样品的Ca,Al,N,P,Mg,Fe,Mn,Ti和有机碳的测定数据,利用稳健RQ型主分量分析及Q型聚类分析方法,对珠江口外陆架表层沉积物进行了地球化学分类,并将该陆架区划分成陆源细碎屑沉积区、经叠加改造的残留泥砂质沉积区、生物碎屑沉积区以及高能环境下的石英砂质沉积区。结果表明了稳健统计方法相对于传统统计方法的优越性,以及采用稳健主分量的Q载荷进行聚类分析相对于用原始变量进行聚类分析的优越性。     

Triple diagram method for the prediction of wave height and period

Many formulations have been developed so far to predict the wave height and period from fetch length and wind blowing duration for a constant wind speed. This study aimed to predict wave parameters from fetch length and meteorological factors by using triple diagram methodology based on Kriging principles. Proposed model results were compared with Joint North Sea Wave Project (JONSWAP) model which is used so commonly in the ocean and coastal engineering studies. For the implementation of the methodology hourly wave and wind data were obtained from a buoy located in Lake Ontario. Numerical and graphical comparisons demonstrated that the proposed method outperforms the classical formulation.     

Separation of Waves by Interpolation Method

1 .ＩｎｔｒｏｄｕｃｔｉｏｎＴｏｍｅａｓｕｒｅｔｈｅｒｅｆｌｅｃｔｉｏｎｏｆｉｎｃｉｄｅｎｔｗａｖｅｓｐｒｏｄｕｃｅｄｂｙａｐｈｙｓｉｃａｌｍｏｄｅｌｉｎａｗａｖｅｆｌｕｍｅｉｓａｃｏｍｍｏｎｐｒｏｂｌｅｍｗｉｔｈｐｈｙｓｉｃａｌｔｅｓｔｓｏｆｗａｖｅａｃｔｉｏｎｏｎｃｏａｓｔａｌｓｔｒｕｃｔｕｒｅｓ .Ｗａｖｅｓｇｅｎｅｒａｔｅｄｂｙｔｈｅｗａｖｅ ｍａｋｅｒｐｒｏｐａｇａｔｅｆｏｒｗａｒｄｉｎｔｈｅｗａｖｅｆｌｕｍｅａｎｄａｒｅｒｅｆｌｅｃｔｅｄｂｙｔｈｅｐｈｙｓｉｃａｌｍｏｄｅｌ,ａｎｄｔｈｅ…     

具有匹配不确定的奇异摄动系统的鲁棒控制

对于同时具有结构匹配不确定和系统不确定量的奇异摄动系统，利用Lyapunov稳定性理论进行了鲁棒性研究。给出了1个理想奇异摄动系统的稳定鲁棒控制也是不确定奇异摄动系统稳定控制的稳定条件和鲁棒界，讨论了鲁棒界及其随参数变化的变化范围。本文是王宪杰，高存臣已有结果的推广。     

Optimizing interpolation of shoot density data from a Posidonia oceanica seagrass bed

A case study on the optimization of Posidonia oceanica density interpolation, using a data set from a large meadow at Porto Conte Bay (NW Sardinia, Italy), is presented. Ordinary point kriging, cokriging and a weighted average based on inverse square distance were used to interpolate density data measured in 36 sampling stations. The results obtained from different methods were then compared by means of a leave‐one‐out cross‐validation procedure. The scale at which interpolation was carried out was defined on the basis of the Hausdorff dimension of the variogram. Optimizing spatial scale and data points search strategy allowed obtaining more accurate density estimates independently of the interpolation method.