A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.     

AN EVALUATION OF SAS/GRAPH SOFTWARE FOR COMPUTER CARTOGRAPHY1

The SAS® computer software system, widely used and respected for its capabilities in statistical analysis and data base management, now includes a new set of graphic and cartographic procedures called SAS GRAPH?. We have used these cartographic procedures in research on mapping ethno-cultural census data from metropolitan areas in Ontario and in undergraduate and graduate courses in computer cartography. On the basis of that experience, we describe and evaluate SAS/GRAPH'S cartographic capabilities and illustrate with maps drawn by various devices.     

Strain localization in sand: an overview of the experimental results obtained in Grenoble using stereophotogrammetry

Experimental results are presented from the extensive program of drained plane strain compression tests on sand carried out in Grenoble over the last two decades. Systematic analysis of photographs of the deforming specimen allowed for measuring deformations and determining strain fields throughout the test, that is: prior to, at, and after the onset of strain localization. The principles, details and accuracy of the procedure are described, as well as its suitability to properly depict the patterns of deformation. Findings concerning the occurrence and progression of strain localization are discussed. The issues of shear band orientation and thickness are addressed, as well as temporary and persistent complex localization patterns, and the volumetric behaviour inside a band after its formation. The influence of such variables as initial state of the sand (effective stress and relative density), specimen size and slenderness, as well as grain size, is discussed. Copyright © 2004 John Wiley & Sons, Ltd     

台湾海峡西岸重力场变化梯度场图像分析

讨论了应用曲面拟合技术和利用离散的重力观测点的重力变化对特定研究区的重力场变化进行数值模拟以获取该区重力变化空间梯度场图像的具体方法;并应用该方法获得了2004年3月福建安溪3.6级地震前的重力变化空间梯度场图像,发现空间梯度场图像能清晰地反映出地震前重力场群体性变化的差异性;利用此方法对2005年6月~2006年3月间台湾海峡西岸重力场变化进行数值模拟,获得其空间梯度场图像。     

三峡重庆库区深部地球物理特征与断裂构造

为了深入研究三峡重庆库区岩石圈动力学特征及其对断裂构造活动的控制和影响．并为之提供基础资料，为三峡重庆库区地震、地质灾害的监测与防治提供基础依据，在已有地球物理资料的基础上，从综合地球物理研究角度出发，通过实测地震测线资料的再解释．采用新的处理技术方法，对本区的东西向主剖面和南北向支测线的地震测深资料进行二维射线追踪处理、Pg波成像；选用场分离技术、位移数字成像技术重新处理了重力和航磁资料，通过联合反演来建立深部二维构造剖面，对剖面所揭示的基底构造特征和地壳结构特征、主要断裂构造特征以及莫霍面的起伏特征进行了精细分析和细致研究．从地球物理平面场特征出发建立了岩石圈构造三维框架。研究结果表明，这样的研究思路准确、方法得当．结论可靠；沿该剖面，把可解译的断裂分为Ⅲ级：Ⅰ级为超岩石圈断裂；Ⅱ级为壳断裂；Ⅲ级为盖层断裂。依据地球物理特征，准确揭示了库区的断裂构造特征，达到了预期效果。     

A focal plane detector design for a wide-band Laue-lens telescope

The energy range above 60 keV is important for the study of many open problems in high energy astrophysics such as the role of Inverse Compton with respect to synchrotron or thermal processes in GRBs, non thermal mechanisms in SNR, the study of the high energy cut-offs in AGN spectra, and the detection of nuclear and annihilation lines. Recently the development of high energy Laue lenses with broad energy bandpasses from 60 to 600keV have been proposed for a Hard X ray focusing Telescope (HAXTEL) in order to study the X-ray continuum of celestial sources. The required focal plane detector should have high detection efficiency over the entire operative range, a spatial resolution of about 1mm, an energy resolution of a few keV at 500keV and a sensitivity to linear polarization. We describe a possible configuration of the focal plane detector based on several CdTe/CZT pixelated layers stacked together to achieve the required detection efficiency at high energy. Each layer can operate both as a separate position sensitive detector and polarimeter or work with other layers to increase the overall photopeak efficiency. Each layer has a hexagonal shape in order to minimize the detector surface required to cover the lens field of view. The pixels would have the same geometry so as to provide the best coupling with the lens point spread function and to increase the symmetry for polarimetric studies.     

西洋东大港水道流速垂线分布研究

对辐射沙洲海域东大港4#站位连续2个潮周期的流速测量资料进行了分析、研究,拟合给出了流速垂线分布关系,并根据实际测量资料确定了该站位6个水层的浑水水流尾流函数项表达式。这些表达式表明浑水水流尾流函数是相对深度和摩阻速度的函数。探讨分析了尾流函数的空间分布和潮周期过程。非恒定流的水流尾流函数项的准确表达,对于揭示含沙水流流速结构及水、沙相影响作用规律将起到启发和推动作用。     

海洋调查数据的可视化建模及实现方法

科学计算可视化作为新一代的分析工具 ,正在进入物理海洋学领域。文中介绍对海洋调查数据进行可视化的关键问题——数据建模 ,并从分析海洋调查数据的特点出发提出针对海洋研究中可视化建模的原则和有效途径 ,给出相关的实现方法。其中 ,重点讨论局部体样条建模中必须面对的区域分割优化问题 ,引入遗传算法并给出较好的解决方案。     

泥石流平面形态的统计分析

泥石流扇的平面形态可用规划的几何图形来模拟。在研究了中国西南地区小江流域和意大利东北部阿尔卑斯山区的５２个泥石流扇的基础上，本文提出了两种泥石流扇的平面形态：中国西南地区的“等腰三角形＋半圆形”泥石流扇和意大利东北部的“几何扇”。用统计分析建立了两组泥石流扇和泥石流流域之间的形态度量关系。通过两个研究区域的对比，两个流域参数：流域面积和主沟比降确定为影响泥石流扇平面形态和面积的最重要的因素。     

晚中生代─新生代南海周缘地块运动与南海演化

报道了由华南几个盆地的古地磁数据综合而得的反映该区白垩纪以来古纬度变化曲线，结合Ｓｃｈｍｉｄｔｋｅ等（１９９０）发表的加里曼丹１５０Ｍａ以来的古地磁数据，表明华南与加里曼丹在４０Ｍａ前具有大致相同的古纬度变化史，差异仅出现在距今３０Ｍａ前后和１０Ｍａ以来。若此趋势可靠，则可作出下列推断：（１）南海的扩张只能发生在距今３０Ｍａ附近或１０Ｍａ以后华南与加里曼丹反向运动时期；距今３０Ｍａ的扩张已被广为接受；（２）华南与加里曼丹之向可能存在的古南海只能在９１Ｍａ之前存在；（３）南海演化可能存在两期扩张。南海的拟合可通过沿３５００ｍ等深线的先道时针旋转、后北向平移两个步骤完成。这与Ｈａｙａｓｈｉｄａ等（１９９１）提出的日本海张开与扩张模式很相似，提示东亚边缘海的形成和演化可能具有同样的机制。华南距今５０Ｍａ以来的古纬度变化与Ｔａｐｐｏｎｎｉｅｒ（１９８２）的传播挤出构造模式所预期的基本吻合，表明距今５０Ｍａ以来华南古纬度变化的运动学机制可用Ｔａｐｐｏｎｎｉｅｒ模式作解释。