小波气候突变的检测--应用范围及应注意的问题

气候突变及其检测是气候变化研究的一个重要方面。气候突变的表现多种多样,目前也有许多检测气候突变的方法,但这些方法能否准确地检测出气候突变现象,他们的适用范围如何,是一个值得注意的问题。研究表明,尽管小波分析方法在检测序列突变方面具有严格的数学意义,但因为其检测到的是序列的均值突变,因此,在应用于气候突变的检测方面应该特别注意,数学上的严格并不等同于气候意义上的严格。因为某些情况下有些突变点并没有一定的气候意义。     

基于顶点度的多分辨率表示

针对边收缩算法在计算大曲率面距离公差时计算量大 ,且收缩大曲率面所含的线段时易使关键点发生偏移而引起模型变动过大、简化不够准确的问题 ,本文在边收缩算法基础上提出了加入顶点度控制的算法 ,以减少大曲率面距离公差的冗余计算 ,并提高模型简化质量。实验表明该算法能提高模型简化质量 ,并加快图形收缩的生成速度。     

Outlier detection algorithms and their performance in GOCE gravity field processing

The satellite missions CHAMP, GRACE, and GOCE mark the beginning of a new era in gravity field determination and modeling. They provide unique models of the global stationary gravity field and its variation in time. Due to inevitable measurement errors, sophisticated pre-processing steps have to be applied before further use of the satellite measurements. In the framework of the GOCE mission, this includes outlier detection, absolute calibration and validation of the SGG (satellite gravity gradiometry) measurements, and removal of temporal effects. In general, outliers are defined as observations that appear to be inconsistent with the remainder of the data set. One goal is to evaluate the effect of additive, innovative and bulk outliers on the estimates of the spherical harmonic coefficients. It can be shown that even a small number of undetected outliers (<0.2 of all data points) can have an adverse effect on the coefficient estimates. Consequently, concepts for the identification and removal of outliers have to be developed. Novel outlier detection algorithms are derived and statistical methods are presented that may be used for this purpose. The methods aim at high outlier identification rates as well as small failure rates. A combined algorithm, based on wavelets and a statistical method, shows best performance with an identification rate of about 99%. To further reduce the influence of undetected outliers, an outlier detection algorithm is implemented inside the gravity field solver (the Quick-Look Gravity Field Analysis tool was used). This results in spherical harmonic coefficient estimates that are of similar quality to those obtained without outliers in the input data.     

Particle size dependent response of aerosol counters

During an international workshop at the Institute for Experimental Physics of the University of Vienna, Austria, which was coordinated within the Committee on Nucleation and Atmospheric Aerosols (IAMAS-IUGG), 10 instruments for aerosol number concentration measurement were studied, covering a wide range of methods based on various different measuring principles. In order to investigate the detection limits of the instruments considered with respect to particle size, simultaneous number concentration measurements were performed for monodispersed aerosols with particle sizes ranging from 1.5 to 50 nm diameter and various compositions.The instruments considered show quite different response characteristics, apparently related to the different vapors used in the various counters to enlarge the particles to an optically detectable size. A strong dependence of the 50% cutoff diameter on the particle composition in correlation with the type of vapor used in the specific instrument was found. An enhanced detection efficiency for ultrafine hygroscopic sodium chloride aerosols was observed with water operated systems, an analogous trend was found for n-butanol operated systems with nonhygroscopic silver and tungsten oxide particles.     

金属腐蚀探测

本阐述了金属腐蚀的危害性和金属管道腐蚀探测的迫切性，并介绍了几种具有探测腐蚀功能的物探方法。     

Spectral and Multiscale Signal-to-Noise Thresholding of Spherical Vector Fields

The basic concepts of spectral and multiscale selective reconstruction of (geophysically relevant) vector fields on the sphere from error-affected data is outlined in detail. The reconstruction mechanism is formulated under the assumption that spectral as well as multiscale approximation is well-representable in terms of only a certain number of expansion coefficients at the various resolution levels. It is shown that spectral denoising by means of orthogonal expansions in terms of vector spherical harmonics reflects global a priori information of the noise (e.g., in form of a covariance tensor field), whereas multiscale signal-to-noise thresholding can be performed under locally dependent noise information within a multiresolution analysis in terms of spherical vector wavelets. An application of the multiscale formalism to Earth's magnetic field determination is presented.     

磁共振用于医学成像与地面找水方法的技术对比研究

目的 医学核磁共振与地面核磁共振找水是核磁共振技术应用的不同领域。本文通过对二者在方法原理、技术、应用等方面的对比研究，提出了地面核磁共振找水工作建议。     

Applicability of a Backprojection Algorithm to Reconstruct Images of Subsurface Horizontal Planes for Laboratory Experiments in Electrical Resistance Tomography

This paper describes the use of a backprojection algorithm to reconstruct subsurface images of the electrical resistivity in horizontal planes parallel to the surface. The algorithm can be applied to detect buried objects such as tanks or pipes and possible leakages from them. Two imaging strategies are compared: juxtaposition of vertical planes, and 3D reconstruction from the sensitivity matrix corresponding to the entire volume whose surface is explored. The electrode arrays used for voltage measurement are the dipole–dipole array and a modified Schlumberger array. A personal computer controls current injection, electrode switching, and voltage detection. The system injects 1 kHz, 20 V peak-to-peak square waveforms, thus avoiding electrode polarization effects. Experimental laboratory measurements show that the algorithm detects localized objects such as an insulating sphere and a conductive cylinder immersed in water. Furthermore, covering half of the cylinder by a rubber sleeve to simulate a nonconductive leak, yields a distinct image for the leak. The backprojection algorithm does not need any regularization parameter and it is very fast in inverting the sensitivity matrix because it approximates the inverse matrix by its transposed. The dipole–dipole array usually yields a lower overall pixel error than the modified Schlumberger array but both allow the detection of simulated underground leaks.     

Fe3+纳米胶体颗粒的光吸收边蓝移与溶液中Al/Fe比的关系

合成了n（Al）／n（Fe）和碱化度不同的45个聚合氯化铝铁（PAFC）样品,进行了光谱分析,结果显示光吸收边蓝移或红移以及Fe（Ⅲ）羟基氧化物和Al-Fe共聚体纳米胶体颗粒大小分布与溶液的Al／Fe比和碱化度（B=[OH]／[Al＋Fe]）密切相关。电镜观察和电子衍射分析表明：Al（Ⅲ）的加入使Fe（Ⅲ）羟基氧化物和Al-Fe共聚体纳米胶体颗粒变小、有序度降低是造成PAFE光吸收边蓝移和保持胶体颗粒在亚稳定状态下存在的重要原因。当n（Al）／n（Fe）〉8：2后,PAFC溶液中Fe（Ⅲ）羟基氧化物和Al-Fe共聚体胶体主要以〈10m的纳米颗粒形态存在,对应的光谱能级提高到26000cm^-1以上,且各种曰值下Fe^3＋的光谱能级趋于一致。这表明,在大量Al（Ⅲ）存在条件下,PAFE中Fe3^＋的所处的化学环境相似。点能谱分析显示,n（Al）／n（Fe）=4：6的样品中颗粒物的化学计量比最接近AlOOH,FeOOH,溶液的稳定性最差。     

蒙脱石红移、蓝移及水化特征的谱学分析

对提纯蒙脱石、钠化蒙脱石、有机插层蒙脱石进行紫外-可见光学吸收谱分析、红外光谱分析,发现蒙脱石随着粒度的变化产生红移和蓝移现象。1631插层样品较钠化样品红移20 nm以上,而提纯的胶体粒子样品较1631插层样品SM G-1631红移80 nm;由于提纯蒙脱石样品粒度变细羟基伸缩振动吸收峰向高波数移动了1.69 cm-1,即蓝移了1.69cm-1。蒙脱石水化性能的XRD分析表明,蒙脱石吸水后晶层发生膨胀、剥离,脱水时分散后的晶层发生凝聚作用,即面-面结合作用,形成蒙脱石“定向性层状集合体”衍射峰的d值产生了相应的变化,这种凝聚作用是蒙脱石分散剥离的逆作用,但凝聚后形成的凝聚蒙脱石的衍射谱特征与原始蒙脱石的大不相同。蒙脱石红移、蓝移及水化特征的谱学分析研究丰富了天然纳米蒙脱石矿物材料晶体化学研究的内容,具有重要的理论意义。