抽油机悬点投影测量仪

油田抽油机的抽油杆幌动幅度过大，是引起抽油杆断裂的一个重要因素，检测这种幌动幅度是防止抽油杆断裂的一种有效手段。设计了一种基于面阵CCD和普通半导体激光器（LD）测量这种幌动的悬点投影测量方法，通过数字卷积滤波，达到了范围为0－40mm，误差＜0.2mm的技术检测指标。     

利用Lageos 1 SLR资料解算1990-2001年的地球定向参数

利用 12年的Lageos 1卫星激光测距资料 (1990 - 2 0 0 1)解算得到了地球定向参数 (EOP) ,将该序列的结果与同期的EOP(IERS)C0 4进行比较 ,其外符精度为 :极移XP— 0 .4 0mas,YP— 0 .4 2mas ,日长变化Dr— 0 .0 35ms。     

差分法周跳探测与修复方法改进

在目前常用的周跳探测与修复方法基础上 ,提出了首先将观测资料按照观测历元不连续分成若干小弧段 ,然后利用差分法进行周跳探测 ,根据差分后周跳放大的特性判断周跳和野值 ,并确定其位置利用宽带组合和电离层组合的方法解算周跳大小。通过实例验证了其有效性。     

格网DEM中基于坡度信息的粗差检测与剔除方法试验

提出了一种基于格网DEM的粗差检测及剔除方法,其基本思想是对每个表面上的点,在坡度上,高程或突变量引起的形状不连续,可能被怀疑有误差,通过坡度上每个点,应用坡度逼近或改变量来计算,考虑坡度变化的相对值,并以这些相对值计算一个统计值为判断该点合法性的阈值,使计算结果更为可靠。     

A 59-second period in the very high energy gamma-ray emission from the Geminga pulsar

An analysis of our observations of the Geminga object with the GT-48 ground-based gamma-ray telescope has shown that its very-high-energy gamma-ray flux is modulated with a 59-s period. The 59-s period and its time derivative previously inferred from satellite data have been confirmed. According to our data, the period was 61.94 s in 1997 at MSD=50573. The statistical significance of this result is (1?4.5)×10^?4.     

伪随机码调制的CW半导体激光雷达试制报告

本文报告一种用半导体激光器作光源,用子脉冲宽度100ns,长度为511的周期伪随机码对半导体激光器的输出作幅度调制;APD作光电检测器,高速数字信号处理器TMS320C25作信号处理的激光雷达组成方案和试作样机的实验结果。     

瞬变电磁法探测公路隧道工程中的不良地质构造

为了给公路设计部门提供选线依据,运用瞬变电磁法在山西境内的某两条高速公路隧道工程设计线路段上进行探测,以查明下覆不良地质构造的发育情况.通过对瞬变电磁法的探测能力进行理论上的讨论,对不同地电断面情况下的异常体电磁响应的定性分析,得出用瞬变电磁法探测不良地质体的可行性结论.经过资料处理,查出不良地质构造赋存的位置,解释结果与钻探资料完全吻合.     

2001-2002年上海天文台卫星激光测距观测报告

介绍了 2 0 0 1- 2 0 0 2年上海天文台卫星激光测距观测概况和亚厘米级精度的测距实验     

Techniques to measure grain-size distributions of loamy sediments: a comparative study of ten instruments for wet analysis

Ten instruments for measuring the grain‐size distribution of loamy sediments in water were tested in a comparative study. Instruments tested were: the Malvern Mastersizer S, the Coulter LS 200, the Fritsch Analysette 22 (version C), the Horiba Partica LA‐950, the Sedigraph 5100, the Atterberg cylinder, the Coulter Multisizer 3, the CIS‐100, the EyeTech and the image analysis software Histolab. The first four instruments use laser diffraction. The Sedigraph and Atterberg cylinder are based on sedimentation. The Coulter Multisizer 3 uses impedance measurements and the last three instruments use optical techniques. Grain‐size analyses were carried out on four sediments with median grain diameters of approximately 35, 30, 12 and 9 μm, respectively, and with no particles >90 μm. The laser diffraction instruments produced the best results for the various criteria considered in this study, followed by the Coulter Multisizer 3 (electrical sensing zone technique), the sedimentation techniques and the optical methods. However, the study also showed that there is no such thing as an ‘ideal’ method because techniques may score differently according to the criterion tested. An appropriate evaluation thus requires that various criteria be considered. Issues to be taken into account are: type of sediment, quantity of sediment available, speed of measurement, complexity of the measurement protocol, processing of the data, reproducibility of the results and the specific aims of the study undertaken.     

氢化物发生及其在分析检测领域的应用

论述了氢化物发生的条件和普遍性及其在分析检测领域的应用,这些领域包括试样分解,分离富集,容量分析、比色分析、原子荧光光谱、原子吸收光谱、电感耦合等离子体原子发射光谱、电感耦合等离子体质谱等分析测试技术。