The role of sediment specific gravity and availability on cluster evolution

The objective of this experimental study was to account for the role of sediment availability and specific gravity on cluster formation and cluster geometric characteristics (spacing and size). To isolate the effects of sediment availability and specific gravity on cluster evolution, mono‐sized spheres were used to simulate the cluster evolutionary cycle. Overall, twelve experimental runs were carried out in the laboratory flume. Six of these tests were performed by using glass spheres (specific gravity, SG = 2·58) and the other six by employing an equal combination of glass and Teflon spheres (SG = 2·12) of the same diameter to evaluate the role of specific gravity on cluster evolution. The three sediment availability conditions that were investigated here simulated isolated gravel elements, pool–riffle sequences and densely packed gravel‐bed. An advanced image analysis technique was employed to track the evolution of cluster microforms and provide quantitative information about the size and shape of clusters and the number of clusters per unit area. The results of this study showed that: (1) sediment availability affects the architecture and size of cluster microforms; and (2) clusters consisting of mono‐sized sediments start disintegrating at twice the incipient conditions. By performing complementary tests for the isolated gravel elements case, it was found that the evolutionary cycle of individual clusters could be described as follows, in order of increasing stress: no cluster→two particle cluster→comet→triangle→rhomboid→break up. Copyright © 2003 John Wiley & Sons, Ltd.     

Curvature analysis of triangulated surfaces in structural geology

This paper addresses the problem of characterizing the shape of a geological surface on the basis of its principal curvatures. The surface is assumed to be modeled as a set of adjacent triangles defined by the location of their vertices and a method is proposed for estimating numerically the principal curvatures at the vertices of the triangles using a local C² interpolant. Also shown is how principal curvatures can be useful for studying the deformation of a geological surface (with application to 3D balanced unfolding), and analyzing the folding or faulting of the interface between two adjacent layers.     

Pall型摩擦阻尼支撑内力计算方法

从Pall摩擦阻尼器四连杆机构的几何非线性变形特征出发，分析框架位移、支撑刚度、阻尼器摩擦力、阻尼器大小、支撑倾角、支撑屈曲力等对一种改进的Pall摩擦阻尼器-T形芯板摩擦阻尼器支撑的受力特点，拟合出可供设计人员使用的实用计算公式。     

Channel adjustments of the lower Trinity River,Texas, downstream of Livingston Dam

Channel cross‐sectional changes since construction of Livingston Dam and Lake Livingston in 1968 were studied in the lower Trinity River, Texas, to test theoretical models of channel adjustment, and to determine controls on the spatial extent of channel response. High and average flows were not significantly modified by the dam, but sediment transport is greatly reduced. The study is treated as an opportunistic experiment to examine the effects of a reduction in sediment supply when discharge regime is unchanged. Channel scour is evident for about 60 km downstream, and the general phenomena of incision, widening, coarsening of channel sediment and a decrease in channel slope are successfully predicted, in a qualitative sense, by standard models of channel response. However, there is no consistent channel response within this reach, as various qualitatively different combinations of increases, decreases or no change in width, depth, slope and roughness occur. These multiple modes of adjustment are predicted by the unstable hydraulic geometry model. Between about 60 km and the Trinity delta 175 km downstream of the dam, no morphological response to the dam is observed. Rather than a diminution of the dam's effects on fluvial processes, this is due to a fundamental change in controls of the fluvial system. The downstream end of the scour zone corresponds to the upstream extent of channel response to Holocene sea level rise. Beyond 60 km downstream, the Trinity River is characterized by extensive sediment storage and reduced conveyance capacity, so that even after dam construction sediment supply still exceeds transport capacity. The channel bed of much of this reach is near or below sea level, so that sea level rise and backwater effects from the estuary are more important controls on the fluvial system than upstream inputs. Copyright © 2005 John Wiley & Sons, Ltd.     

A new view of Italian seismicity using 20 years of instrumental recordings

In this paper, we show the seismicity of the past 20 years that occurred in Italy and surrounding regions. Hypocentral locations have been obtained by using P- and S-wave arrival times from the INGV national and several regional permanent seismic networks. More than 48,000 events, selected from an original data set of about 99,780, are used to reconstruct the most complete seismic picture of the Italian region so far. The seismicity distribution allows inference on seismotectonics of this complex region of subduction versus continental collision. Our results clearly reveal the geometry of the Adria and the Ionian subduction and a continuous normal fault belt in the upper crust, following the Apennines mountain range. The depth of the seismogenic layer is computed from the cut-off of seismicity at depth and shows large variations along and across the seismic active regions. Earthquakes are generated by the different velocity of slab retreat and the subsequent asthenospheric upwelling.     

质量传输和同位素交换:流动几何学和交换机制

耦合的质量传输和动力学限制的同位素交换模型综合考虑了平流、扩散、热液弥散 ,以及岩石与水之间的不平衡同位素交换等项因素。把耦合模型应用于 2个构造环境下的古热液系统 ,进而解释稳定同位素数据。对于造成环绕浅成侵入岩体分布的18O亏损环带的流体的流动几何学 ,以及浅部正断层流体流动的几何学 ,耦合模型提供了不同于单一同位素交换模型的解释。耦合模型也提供了关于同位素相对交换速率和同位素交换机制的信息。结果表明 ,断层带的动态重结晶促进了表面反应 ,进而便利了同位素交换 ;在化学不反应性和未变形的矿物中 ,同位素交换可能受制于固态条件下的扩散。     

428XL系统死机故障分析与排解方法

在大港探区新港Ⅰ期三维地震勘探中,428XL系统频繁出现了死机现象,如开机后仪器无故停止执行各项操作、放炮时系统操作窗口跳出软件错误信息、窗口之间可相互切换但软件却无法执行操作命令、采集数据流程被中断等。根据现场采取的降低系统软件版本等应急措施所呈现的效果及对428XL死机现象分析,认定这类故障是由于软件的兼容性存在问题所致。据此提出了使用超级排列、现场降级系统软件版本及强行中断server运行等方法,以解决428XL系统死机故障。     

3DCM的几何与纹理数据一体化管理方法研究

建设三维城市模型(3DCM)首先需要建立场景所需的海量地形地物空间数据库,从而有效组织三维实体数据来满足大范围高精度场景实时绘制的要求.该文提出一种以三维空间实体为单位的基于关系数据库(RDBMS)的3DCM的几何与纹理数据一体化管理方法.采用Direct3D 9.O三维开发平台、C#编程语言实现了3DCM空间数据库模型管理系统.实验证明:该系统在效率、安全、网络多用户访问方面都优于传统基于文件的管理模式,满足了大范围3DCM海量模型数据管理与应用需求.     

基于特征提取的目标变化检测方法研究

针对不同时相遥感影像中特定目标的变化,研究了基于特征提取的目标变化检测方法。该方法首先根据目标的几何特征进行检测与提取,然后对提取出的两目标影像进行比较,得到特定目标的变化。实验结果表明该方法对特定目标的变化检测有较好的效果。