PVC-U塑料管在浅层地热能地下水资源开发工程中应用与研究

PVC-U塑料管具有耐腐蚀、不结垢、质量轻、使用寿命长等特点。将其应用于浅层地热能开发和供水管井工程中,不但可以解决金属井管腐蚀破裂、结垢和水源热泵回灌难等问题,而且还减少了水井维修费用、延长其使用寿命。结合河南郑州实施的437、400 m两眼浅层地热能开发和供水管井示范工程实践,详细论述了PVC-U塑料管成井工艺、存在问题及解决方法的研究成果。     

Field measurements and monitoring of wastewater discharge in sea water

This paper reports a study of the field measurements and monitoring of wastewater discharge in sea water at Bari East (Italy). A wastewater sea outfall system is an integral and fundamental part of each wastewater treatment with ultimate sink in the sea water. The design of a water treatment plant and wastewater outfall must take into account the use of the environmental water, the values of physicochemical parameters to be respected in order to safeguard the use itself and the quality of the environmental water where wastewater is issued. In the present study measurements of sea current velocity components were carried out with a VM-ADP (Vessel-Mounted Acoustic Doppler Profiler). Salinity, wind directions and velocities were assessed with, for one survey, the total faecal coliforms and other biochemical parameters. It was emphasized that the measurements necessary for monitoring cannot be concentrated in the wastewater outfall pipe zone only, but should be extended to a neighbouring area of the outfall pipe, with an extension depending on the wastewater discharge, the polluting charge and the magnitude of the sea currents and the winds typical of the zone of interest. The analyses presented in this paper confirm that the sea zones close to the wastewater outfall pipe are particularly sensitive and vulnerable. Such results must be considered in the planning of a wastewater outfall pipe.     

Influence of large-diameter pipe pile driving on surrounding marine soils and adjacent submarine pipelines

Abstract

With the large-scale development and utilization of ocean resources and space, it is inevitable to encounter existing submarine facilities in pile driving areas, which necessitates a safety assessment. In this article, by referring to a wharf renovation project as a reference, the surrounding soil response and buried pipe deformation during pile driving in a near-shore submarine environment are investigated by three-dimensional (3D) numerical models that consider the pore water effect. Numerical studies are carried out in two different series: one is a case of a single pile focusing on the effect of the minimum plane distance of the pile–pipe, and the other is a case of double piles focusing on the effect of the pile spacing.     

A Numerical Model for Natural Backfill of Pipeline Trenches Subjected to Unidirectional／Oscillatory Flows

A numerical model for the self-burial of a pipeline trench is developed. Morphological evolutions of a pipeline trench under steady-current or oscillatory-flow conditions are simulated with/without a pipeline inside the trench. The oscillatory flow in this study represents the action of waves. The two-dimensional Reynolds-averaged continuity and Navier-Stokes equations with the standard k-e turbulence closure, as well as the sediment transport equations, are solved with the finite difference method in a eurvilirrear coordinate system. Both bed and suspended loads of sediment transport are included in the morphological model. Because of the lack of experimental data on the backfilling of pipeline trenches, the numericalmodel is firstly verified against three closely-relevant experiments available in literature. A detailed measurement of the channel migration phenomenon under steady currents is employed for the assessment of the integral performance of themodel. The two experimental results from U-tube tests are used to validate the model‘s ability in predicting oscillatory flows. Different time-marching schemes are employed for the morphological computation under unidirectional and oscillatory conditions. It is found that vortex motions within the trench play an important role in the trench development.     

Monitoring of Over Cutting Area and Lubrication Distribution in a Large Slurry Pipe Jacking Operation

Slurry pipe jacking was firmly established as a special method for the non-disruptive construction of the underground pipelines of sewage systems. Pipe jacking, in its traditional form, has occasionally been used for short railways, roads, rivers, and other projects. Basically the system involves the pushing or thrusting of concrete pipes into the ground by a number of jacks. In slurry pipe jacking, during the pushing process, mud slurry and lubricant are injected into the face and the over cutting area that is between the concrete pipes and the surrounding soil. Next, the slurry fills voids and the soil stabilizes due to the created slurry cake around the pipes. Fillings also reduce the jacking force or thrust during operation. When the drivage and pushing processes are finished, a mortar injection into the over cutting area is carried out in order to maintain permanent stability of the surrounding soil and the over cutting area. Successful lubrication around the pipes is extremely important in a large diameter slurry pipe jacking operation. Control of lubrication and gaps between pipes and soil can prevent hazards such as surface settlement and increases in thrust. Also, to find voids around the pipes after the jacking process, in order to inject mortar for permanent stabilizing, an investigation around the pipes is necessary. To meet these aims, this paper is concerned with the utilization of known methods such as the GPR (Ground Penetrating Radar) system and borehole camera to maintain control of the over cutting area and lubricant distribution around the pipes during a site investigation. From this point of view, experiments were carried out during a tunnel construction using one of the largest cases of slurry pipe jacking in Fujisawa city, Japan. The advantages and disadvantages of each system were clarified during the tests.     

TEM和纵向四极测深探测管网研究

各种地球物理探测方法均有其应用上的优势。联合应用脉冲瞬变电磁法（TEM）和纵向四极测深法各自的方法技术特点，解决工程勘察中超浅层的管网分布与定位问题：TEM进行场地普查，而纵向四极测深进行准确定位。实践证明，TEM和纵向四极测深联合应用是管网探测快速、经济且有效的手段，在工程勘察领域中具有广阔的应用前景。     

高寒富水地区-西藏那曲镇给水管道的安装及维修

西藏那曲镇是全世界海拔最高、含氧量最稀薄、最后一个安装自来水的地级城市。那曲镇海拔高度为4500m，冻土层深达2．8m，地下水丰富，基础开挖超过lm时就有地下水渗出，且土质多为流沙型，施工时容易引起塌方，施工环境恶劣。本文就那曲镇的具体情况介绍一下给水管道的安装及维修。     

地下管线源数据处理方法的研究

为了保障顺利建设上海市地下管线数据库．需要对现存的地下管线的源数据进行一些技术处理，以满足数据入库的要求。本文主要个绍：笔者在从事地下管线源数据处理工作中，碰到的现存的上海市地下管线源数据对于建设上海市地下管线数据库所存在的一些问题：以及笔者利用Autodesk公司的AutoCAD二次开发工具开发的应用程序来处理这些问题的方法。     

深基坑复合喷锚支护技术探讨

工程实践表明,复合喷锚支护是一种有效的深基坑支护型式,它可用于土层条件差、安全性要求高、变形控制严格的基坑工程中。复合支护中锚杆为主要受力构件,竖向花管为辅助受力构件,可起到限制、减小土体变形的作用。由于竖向注浆花管的加入,花管及注浆体抗剪作用加强,使基坑的整体稳定性得以大幅度提高。探讨了复合喷锚支护整体稳定性分析方法,建议将滑动区域分为加固土和原土两部分,将锚管注浆形成的注浆体等效为一层加固土,按喷锚支护模型计算复合喷锚支护整体稳定性。     

流体在同心环状空间中流动时的压力损失

同心环状空间是工程上较常见到的流体流动空间，在此空间中流体流动情况的分析较复杂。工程上对其流动情况的分析常常是引用流体力学中的分析结果，但往往由于对环状空间结构的条件重视不够，引用时很容易出毛病。经过仔细推导分析，指出其应用条件，并有助于对同心环状空间中流体流动时压力损失的分析与计算