相对仿射变换自适应模拟下的ASIFT宽基线立体匹配研究!

目的 针对Affine-SIFT(ASIFT)穷举模拟影像匹配带来的海量特征描述符提取以及高维距离计算问题,本文提出了一种自适应选取最优仿射变换集以大幅减少模拟影像数量,进而提高 ASIFT宽基线立体影像匹配效率的方法,并就其中单应性下的相对仿射变换模拟、渐进式匹配搜索与模型参数估计以及最优仿射变换集的确定等关键问题进行了阐述。实验表明,本方法较好地兼顾了 ASIFT宽基线立体影像匹配的稳健性与效率,具有实用价值。     

基于仿射变换的数字影像内定向的误差控制分析

数字化摄影测量生产中的误差来源众多,尤其是系统误差常常很突出。针对这个问题,首先深入分析了附有未知数的仿射变换控制模型参数的误差估计,然后利用误差传播定律和误差综合原理,推导出了任意非检控点经仿射变换后输出数据精度的计算公式,并通过数值分析从理论上验证了用四个角框标进行数字影像内定向是最佳误差控制方案。     

结合ASIFT和归一化的抗仿射变换遥感影像盲水印算法

针对遥感影像使用过程中,含水印影像经过仿射变换后水印与影像的同步性被破坏,导致水印无法正常检测的问题,本文提出了一种适用于遥感影像的抗仿射变换盲水印算法。首先通过ASIFT算法提取影像具有仿射不变性的特征点,根据特征尺度的大小与特征点间的欧式距离筛选适量特征点,构造对应的正方形特征区域;然后通过计算特征区域的仿射不变矩得出归一化变换函数的参数,对特征区域进行归一化处理,并以归一化特征区域的不变质心为中心提取子区域作为水印嵌入区域,对该区域进行二级离散小波变换,得到水印嵌入区域的低频信息;运用量化嵌入规则将水印嵌入到低频信息中,依次进行低频信息逆小波变换,水印嵌入前后特征区域差值图像反归一化,最后将反归一化差值图像叠加在原始影像特征区域上,完成水印的嵌入。实验选用了3000像素×3000像素的高分二号遥感影像作为载体影像,含版权信息的二值图像作为水印,实验表明：含水印的遥感影像经过旋转、平移、缩放在内的仿射变换后,仍能准确提取水印信息;算法可有效抵抗加噪、滤波、裁剪等常规水印攻击,攻击后影像提取的水印与原水印相关系数均高于0.9;水印具有良好不可感知性;在水印提取时无需原始遥感影像,属于盲水印算法。     

基于仿射变换的线状符号绘制算法研究

针对目前线状符号绘制方法在转折处无法很好地保证复杂图元的几何关系,从而影响显示效果的问题,该文提出一种基于仿射变换的线状符号绘制算法,解决了在保证任意复杂符号的几何拓扑关系不变情况下转折处的平滑过渡难题,实现了线状符号的高效、美观绘制。最后经实际应用验证,该方法能够满足地理信息系统符号化显示和计算机制图需求。     

基于直线间几何属性特征相似性约束的组直线匹配算法

当影像中存在多个相同或相近的直线特征时,仅利用单直线特征间的相似性进行匹配容易导致算法失效,因此本文提出基于直线间几何属性特征相似性约束的组直线匹配算法。该算法利用直线间的拓扑关系分别对2幅影像上提取的直线进行编组得到特征直线组,并将其作为匹配基元;然后利用核线约束确定候选同名直线组的搜索范围,精简了候选直线组的数量;依据直线间几何属性特征向量的仿射不变性建立直线组的匹配关系,将仿射不变量交比作为基础几何不变性测度,并延伸设计仿射相似度参数,计算出目标直线组与每个候选直线组的仿射相似度或一般相似度,确定2种相似度下总体相似度值最大的特征直线组为其同名直线组,最后将同名直线组分裂为2对同名单直线,对分裂后的结果进行整合可以显著降低冗余匹配,得到“一对一”的匹配单直线。为了验证算法的可靠性,实验选取网上公开的5组典型近景影像进行测试,通过与其他匹配算法的对比分析,结果表明该算法应对影像间存在的视角、旋转和尺度变换等复杂条件均取得了较高的匹配精度,匹配正确率最高有14.5%的提升,且阈值的选择对匹配结果影响微弱,验证了基于直线间几何属性特征相似性约束的组直线算法鲁棒性和匹配稳定性较强。     

地图扫描矢量化误差的最小二乘配置法处理研究

屏幕扫描数字化是地图数字化的常用方法。在数字化过程中,由于地图本身的变形、扫描仪分辨率等系统误差会影响数字化的结果。仿射变换是实现栅格数据向矢量化数据转换的常用方法之一,研究表明基于最小二乘的仿射变换只可以消除整体变形,而不能消除局部变形。为此作者提出采用最小二乘配置。采用最小二乘配置可以在计算转换参数的同时估计局部系统变形信号,可以消除或减弱以上误差的影响,改善数字化精度。实例分析表明,是提高扫描数字化的有效方法。     

An approach to analysing plot scale infiltration and runoff responses to rainfall of fluctuating intensity

Simulated rainfall of fluctuating intensity was applied to runoff plots on bare dryland soils in order to explore a new method for analysing the non‐steady‐state responses of infiltration and overland flow. The rainfall events all averaged 10 mm/h but included intensity bursts of up to 70 mm/h and lasting 5–15 min, as well as periods of low intensity and intermittency of up to 25 min. Results were compared with traditional steady‐state estimates of infiltrability made under simulated rainfall sustained at a fixed intensity of 10 mm/h. Mean event infiltration rate averaged 13.6% higher under fluctuating intensities, while runoff ratios averaged only 63% of those seen under constant intensity. In order to understand the changing soil infiltrability, up to three affine Horton infiltration equations were fitted to segments of each experiment. All equations had the same final infiltrability f_c, but adjusted values for coefficients f₀ (initial infiltrability) and K_f (exponential decay constant) were fitted for periods of rainfall that followed significant hiatuses in rainfall, during which subsurface redistribution allowed near‐surface soil suction to recover. According to the fitted Horton equations, soil infiltrability recovered by up 10–24 mm/h during intra‐event rainfall hiatuses of 15 to 20‐min duration, contributing to higher overall event infiltration rates and to reduced runoff ratios. The recovery of infiltrability also reduced the size of runoff peaks following periods of low intensity rainfall, compared with the predictions based on single Horton infiltration equations, and in some cases, no runoff at all was recorded from late intensity peaks. The principal finding of this study is that, using a set of affine equations, the intra‐event time variation of soil infiltrability can be tracked through multiple intensity bursts and hiatuses, despite the lack of steady‐state conditions. Copyright © 2016 John Wiley & Sons, Ltd.     

HIGH PRECISION CCD CALIBRATION AND ITS APPLICATIONS

ABSTRACT

With the help of CCD images, the realization of high precision positioning and measurement has become the basic standard for machine vision and real time photogrammetry systems. However, deformation and other sorts of degradation occurring during transmission are major limiting factors of the precision attainable with most current CCD cameras and frame grabbers. So a precise radiometric and geometric transmission of images from CCD sensor to memory is a fundamental aspect of CCD camera calibration. The geometric calibration system, which uses some image processing algorithms of the CCD camera based on the researched and developed system is discussed. The reliability and validity are also discussed. The experimental results for the calibration of the CCD array will be taken as an important quality index for CCD evaluation.     

土体表面三维位移测试的新方法

采用双目立体视觉与数字图像相关相结合的新方法,对静载作用下湿喷桩复合地基室内模型的土体表面三维位移进行测试。给出了双目立体视觉系统的标定结果,提出了提取角点坐标的新方法及基于仿射变换的左右摄像机同名点的匹配搜索法,得到了土体表面三维位移随荷载变化的曲线。试验结果证明,将该系统应用于湿喷桩复合地基室内模型的土体表面位移测试是一种有益的尝试,也为土体位移测试提供了新的方法。