利用参考重力场模型基于能量法确定GRACE加速度计校准参数

利用多个参考重力场模型分别对GRACE一个月的实测加速度计观测数据进行检校.数值计算结果的比较分析表明了利用参考重力场模型确定加速度计校准参数是有效的.     

Estimating the orientation error of the Dahan Downhole Accelerometer using the maximum cross-correlation coefficient between the observed and synthetic waves

A new algorithm to correct the orientation error of the accelerometerat the Dahan Downhole Array, Hualien, Taiwan is developed. This algorithmconsists of three stages: (1) rotating two horizontal ground motions on thefree surface to the SH-SVdirection and SH axis offers a reference direction.(2) computing the synthetic downhole SH waves at a downhole station and (3)searching a rotation angle for downhole observation that yields a best waveformmatch between the synthetic and observed downhole seismograms. At this point, the rotated angle corresponding to the best waveform match can be considered as the orientation error. We selected five earthquakes with good data qualityfor analysis. Results show that this algorithm gives a more stable estimationthan a conventional method because it allows the selection of data from a wider time window for analyses. The estimated orientation error of the accelerometers at the Dahan Downhole Array after the 1999 reinstallation are40°, 114° and 285° at depths of 50, 100 and 200 m, respectively.     

SLJ型宽频带大动态力平衡三分向加速度计的设计与研制

文中详尽介绍了三分向力平衡加速度计的技术性能、工作原理和理论计算，给出了技术指标鉴定实测结果和获取地震记录的时程曲线。     

Site effects at a vertical accelerometer array near Paducah, Kentucky

The downhole vertical accelerometer array VSAP near Paducah, KY, consists of three-component accelerometers at the surface, the top of the McNairy Formation (−41 m), and the top of the Paleozoic bedrock (—99 m). The array is at the northern end of the Mississippi Embayment, and it was installed to verify the ground-motion modeling for the site, assuming a significant earthquake in the New Madrid Seismic Zone. Accelerograms from 4.2 and 2.0 m_b earthquakes were used to check aspects of the modeling pertaining to linear behavior of the soil column, and to review the soil column models derived by drilling and geotechnical methods and through the use of high-resolution P- and SH-wave seismic refraction in reflection techniques. Results of the study indicate that for the linear case the soil column models derived by the two techniques are equivalent, and that the most important boundary in the soil column, with respect to amplification of the ground motions, is the interface between the limestone bedrock and soil.     

振动测量用叉指式硅微加速度计性能研究

硅MEMS加速度仪可以用于地震以及各种工程振动的测量,目前其精度较低,温度灵敏度较高,为了掌握MEMS加速度计的特性,提高其实用性能,本文介绍了一种叉指式硅微机械加速度计(FMSA)表头微结构和系统的工作原理,推导了微结构梁的刚度,利用ANSYS有限元软件分析了FM-SA加速度计的静态特性、动态特性和温度特性,验证了推导的正确性,说明微结构参数是决定FMSA加速度计性能的主要因素,为改进加速度计性能提供了依据,并对其在振动观测领域实际应用提供了理论指导。     

融合GNSS和加速度计监测数据的超高建筑动态特性分析

GNSS和加速度计是目前动态监测超高建筑环境载荷变形的主要手段。GNSS具有无需通视、可直接获取三维位移等优点,但受精度和采样率的限制,其对微变形及高频振动信息不敏感;而加速度计具有高精度和高采样率等优点,但无法监测超高建筑低频的似静态变形。为充分发挥这两种传感器的各自优势,提出利用多速率Kalman滤波和RTS平滑方法对超高建筑GNSS和加速度计监测数据进行融合处理。试验结果表明,与单一的GNSS监测技术相比,该方法有利于削弱GNSS高频噪声的影响,提高位移数据的采样率,可有效识别超高建筑的低频和高频振动频率,提高对微变形振动的监测能力;与单一的加速度计监测技术相比,该方法可以准确监测超高建筑的低频变形信息,具有良好的工程应用价值。     

SLJ-100DH型井下数字三分向力平衡加速度计装置研制

介绍了新研制的井下数字三分向力平衡加速度计装置技术性能、工作原理,分析讨论了仪器的特点。     

星载加速度计的动力法校准

通过模拟轨道，利用动力法对星载加速度计校准进行了研究。用不同参考重力场模型获得的校准参数分别重新积分卫星轨道，与模拟轨道的差异最大可达m级。结果表明，参考重力场模型误差对加速度计校准的影响不可忽略，在校准加速度计的同时应解算重力场模型，以削弱模型误差的影响。     

基于倾角传感技术的阵列式高精度倾斜监测系统

倾斜监测是建筑物安全使用的重要保障,利用MEMS传感器技术,设计一种基于阵列式双轴倾角传感器的结构倾斜监测设备,该设备具有硬件的高集成化、低能耗,以及变形监测过程及数据分析自动化等特征。采用对比测试、应用示范等方法对装置观测精度、通讯功能、可靠性及功耗进行验证,证明该设备倾角观测精度可达0.01°,观测数据稳定,精度、自动化程度、互动性满足预设要求,可应用在工民建、市政、水利等领域倾斜监测与质量检测中。     

Measurement of six degree-of-freedom ground motion by using eight accelerometers

A new integrated measuring system with eight force-balance accelerometers is proposed to obtain a direct measurement of six degree-of freedom （DOF） ground motions, including three rotational and three actual translational acceleration components without gyroscopes. In the proposed measuring system, the relationship between the output from eight force-balance accelerometer and the six DOF motion of the measuring system under an earthquake are described by differential equations. These equations are derived from the positions and directions of the eight force-balance accelerometers in the measuring system. The third-order Runge-Kutta algorithm is used to guarantee the accuracy of the numerical calculation. All the algorithms used to compute the six DOF components of the ground motion are implemented in a real-time in Digital Signal Processor （DSP）. The distortion of the measured results caused by position and direction errors of the accelerometers in the measuring system are reduced by multiplying a compensation coefficient C to the output and subtracting static zero drift from the measured results, respectively.