Statistical analysis of surface hydrography and circulation variations in northern South China Sea

1 INTRODUCTIONThe South China Sea (SCS) is a semi-enclosedmarginal sea in western North Pacific Ocean withvery complex topography and is the important pas-sage connecting the Pacific and Indian Oceans. Ithas great impact to the global climate and a greatinterest of many oceanography researchers. Twodominant surface hydrographic and circulation fea-tures in the northern SCS are a strong fresh waterexpansion and a warm and high-salinity seawaterintrusion such as the SCS Diluted Water…     

Beam Mode Expansion of Corrugated Conical Horns with Phase Correcting Lens: Application to Radioastronomy Receivers

A classical radioastronomy receiver is fed with a corrugated horn and an independent lens, both placed in a cryostat to lower the noise temperature. The beam is focused and directed using a combination of elliptical and plane mirrors. This paper proposes modifying the initial feeding system by placing the lens onto the horn aperture, thereby allowing a size reduction of the horn and lens, and a simplification of their mechanical design. The profiled lens is shaped to correct the phase error on the horn aperture. A quasi-optical model of the horn-plus-lens system has been developed using a Beam Mode Expansion (BME). Results using both a hyperbolic-planar lens and a spherical-elliptical lens, as well as results obtained by using Geometrical Optics (GO) with a Kirchoff–Huygens integration to get the far-field pattern, have been compared with measurements. As a direct application, a full focusing system for the new 40-m radiotelescope at the “Centro Astronómico de Yebes” is presented for the 22, 30 and 45 GHz bands. This paper has developed a QO model for a corrugated conical horn with a phase-correcting lens. This revised version was published online in July 2006 with corrections to the Cover Date.     

Post-solidification cooling and the age of Io's lava flows

The modeling of thermal emission from active lava flows must account for the cooling of the lava after solidification. Models of lava cooling applied to data collected by the Galileo spacecraft have, until now, not taken this into consideration. This is a flaw as lava flows on Io are thought to be relatively thin with a range in thickness from ∼1 to 13 m. Once a flow is completely solidified (a rapid process on a geological time scale), the surface cools faster than the surface of a partially molten flow. Cooling via the base of the lava flow is also important and accelerates the solidification of the flow compared to the rate for the ‘semi-infinite’ approximation (which is only valid for very deep lava bodies). We introduce a new model which incorporates the solidification and basal cooling features. This model gives a superior reproduction of the cooling of the 1997 Pillan lava flows on Io observed by the Galileo spacecraft. We also use the new model to determine what observations are necessary to constrain lava emplacement style at Loki Patera. Flows exhibit different cooling profiles from that expected from a lava lake. We model cooling with a finite-element code and make quantitative predictions for the behavior of lava flows and other lava bodies that can be tested against observations both on Io and Earth. For example, a 10-m-thick ultramafic flow, like those emplaced at Pillan Patera in 1997, solidifies in ∼450 days (at which point the surface temperature has cooled to ∼280 K) and takes another 390 days to cool to 249 K. Observations over a sufficient period of time reveal divergent cooling trends for different lava bodies [examples: lava flows and lava lakes have different cooling trends after the flow has solidified (flows cool faster)]. Thin flows solidify and cool faster than flows of greater thickness. The model can therefore be used as a diagnostic tool for constraining possible emplacement mechanisms and compositions of bodies of lava in remote-sensing data.     

Occurrence and evolution of the Xiaotangshan hot spring in Beijing, China

Thermal groundwater occurs in bedrock aquifers consisting of the dolomite of the Wumishan Group of the Jixianin System and the Cambrian carbonate in the Xiaotangshan geothermal field near the northern margin of the North China Plain, China. The hot water in the geothermal field of basin-type discharges partly in the form of the Xiaotangshan hot spring under natural conditions. The hot water has TDS of less than 600 mg/L and is of Na·Ca-HCO₃ type. The geothermal water receives recharge from precipitation in the mountain area with elevation of about 500 m above sea level to the north of the spring. Thermal groundwater flows slowly south and southeast through a deep circulation with a residence time of 224 years estimated with the Ra–Rn method. The Xiaotangshan hot spring dried up in the middle of the 1980s owing to the increasing withdrawal of the hot water in the geothermal field in the past decades. The water level of the geothermal system still falls continually at an annual average rate of about 2 m, although water temperature changes very little, indicating that the recharge of such a geothermal system of basin-type is limited. Over-exploitation has a dramatic impact on the geothermal system, and reduction in exploitation and reinjection are required for the sustainable usage of the hot water.     

Experimental study of strong reflection of regular water waves over submerged breakwaters in tandem

A series of laboratory experiments was carried out to investigate the strong reflection of regular water waves over a train of submerged breakwaters. Rectangular and trapezoidal shapes of submerged breakwaters are employed and compared for reflecting capability of incident waves. Measured reflection coefficients of regular waves over impermeable submerged breakwaters are verified by comparing with those of the eigenfunction expansion method. A very good agreement is observed. Reflection coefficients of permeable submerged breakwaters are less than those of impermeable breakwaters. The trapezoidal shape is recommended for a submerged breakwater in terms of reflecting capability and practical application.     

Expanded adaptive fuzzy sliding mode controller using expert knowledge and fuzzy basis function expansion for UFV depth control

Generally, the underwater flight vehicle (UFV) depth control system operates with the following problems: it is a multi-input multi-output (MIMO) system, it requires robustness, a continuous control input, and further, it has the speed dependency of controller parameters. To solve these problems, an expanded adaptive fuzzy sliding mode controller (EAFSMC), which is based on the decomposition method designed by using an expert knowledge and the decoupled sub-controllers and composition method designed by using the fuzzy basis function expansions (FBFEs), is proposed. To verify the performance of the EAFSMC, the depth control of UFV in various operating conditions is performed. Simulation results show that the EAFSMC solves all problems experienced in the UFV depth control system online.     

双层局部开孔板沉箱对波浪反射的理论研究

提出了一种用于研究由双层开孔板和一个不透水后板的开孔结构对斜向波反射率的理论分析方法。整个流域被分成三个子域，在每个子域内应用特征函数展开法以得到该域内包含未知展开系数的势函数的表达式，在速度势的展开中，考虑了非传播模态波浪的影响。通过匹配开孔板处的边界条件可以求解待定的展开系数，继而求解双层开孔板防波堤结构对斜向波的反射率。数值计算结果与试验结果进行了比较，符合较好。并进一步讨论了几个重要因素对反射系数的影响。     

Wave Defending Effects of V-Type Bottom-Mounted Breakwaters

An analytical method is developed for the study of the wave defending effects of the V-type bottom-mounted breakwater. The breakwater is assumed to be rigid, thin, impermeable and vertically located in water of constant depth. The fluid domain is divided into three sub-regions by an imaginary interface. The velocity potential in each region is expanded by eigenfunctions. By satisfying the corresponding boundary conditions and matching conditions in and between sub-regions, a set of hnear algebraic equations can be obtained to determine the unknown coetfficients for the eigenfunction expansions for each sub-region. The accuracy of the present model is verified by a comparison with existing results for the case of an isolated breakwater. Numerical results, in the form of contour maps of the relative wave amplitude around the breakwater, are presented for a range of wave and breakwater parameters. The results show that the V-type bottommounted breakwater is generally effective in defending against waves. In general, the wave height in the protected area is about 20-50 percent of the incident wave height.     

A three-dimensional wave field over a bidirectionally periodic ripple bottom

For gravity wave trains propagating over an arbitrary wavy bottom, a perturbation expansion is developed to the second order so that the Bragg resonance effect of the ripple bottom on the free-surface wave can be analyzed. Both the resonant and non-resonant cases are treated and the singular behavior at resonance is avoided. This theory is successfully verified by reducing to simpler situations. Then, the analytical results for the special case of a unidirectional sinusoidal bottom are compared with experimental data for validation.     

近海海洋石油平台导管架喷涂金属层防腐

锌、铝及其合金涂层对钢铁的防护，不仅对阴极起保护作用(Gartland，1987)， 对涂层本身也具有良好的抗腐蚀性能。此外，涂层中金属微粒表面形成的致密氧化膜，也起到了防腐蚀的作用。在不同大气环境下，锌、铝有良好的耐蚀性，其腐蚀速率比钢铁要低得多(李言涛，1998)。采用热喷涂锌、铝及其合金涂层对钢铁构件和构筑物进行长效防护早在20世纪20年代就已开始应用，至今仍是普遍采用的防护措施，并在继续发展(李守本等，1989)。20年代初，法国首先用于海水闸门的防腐；40年代美国用于墨西哥湾的海上井架和海上输油管以及舰船的防腐；60年代英、法、德等国海军将这一技术扩大应用到舰船的上部结构和船壳。而金属热喷涂技术在海洋工程中使用非常有限，第一次使用热喷铝涂层防护近海平台的实例是Conoco公司在北海的Murchison结构上的锥形塔，并且已获得了4a良好的使用效能(Fisher et al.，1987；Shaw et al.，1985)。1984年6月，Hutton张力支柱平台(TLP)在北海下水(水深148 m)安装。系链、升降机和锥形塔均采用火焰热喷涂技术喷涂铝涂层进行防护(Tyson，1985)。1992年6月，Hotton平台使用8a后，对升降机绳索进行观察，在飞溅区没有发现腐蚀现象，也没有检测到褐色渗漏效应(Fisher et al.，1995)。