Field observations of waves generated by passing ships: A note

This short contribution reports the results of a field study on the nearshore characteristics of waves generated by both conventional and high speed passenger ferries. The field observations took place in the late summer of 2005, at a beach close to the port of Mytilene (Island of Lesbos, Greece), and involved the visual observation of ship waves, using digital video recordings and image processing techniques. The results showed that passage of the fast ferry was associated with a longer, more complex and energetic nearshore event; this event not only did include higher nearshore waves (up to 0.74 m) and was organised in different wave packets, but it was also an order of magnitude longer (∼ 680 s) than the conventional ferry event. Regarding the effects on beach sediment dynamics, the fast ferry waves were estimated to be very efficient in mobilising the nearshore sediments in contrast to those of the conventional ferry. The fast ferry service appears to generate daily prolonged nearshore events, which contain waves with higher energy than those expected from the normal summer wind wave regime of the area; these events also include some high and very steep waves, which can be particularly erosive. Therefore, fast ferry wakes may have considerable impacts on the seasonal beach sediment dynamics/morphodynamics and the nearshore benthic ecology, as well as they may pose significant risks to bathers, affecting the recreational use of the beaches exposed to fast ferry traffic. Finally, the study has shown that satisfactory field observations of the nearshore characteristics of ship-generated (and wind) waves can be obtained using inshore deployments of calibrated poles, digital video cameras and appropriate image processing algorithms.     

Path following control system for a tanker ship model

A two-dimensional path following control system for autonomous marine surface vessels is presented. The guidance system is obtained through a way-point guidance scheme based on line-of-sight projection algorithm and the speed controller is achieved through state feedback linearization. A new approach concerning the calculation of a dynamic line-of-sight vector norm is presented which main idea is to improve the speed of the convergence of the vehicle to the desired path. The results obtained are compared with the traditional line-of-sight scheme. It is intended that the complete system will be tested and implemented in a model of the “Esso Osaka” tanker. The results of simulations are presented here showing the effectiveness of the system aiming in to be robust enough to perform tests either in tanks or lakes.     

Time domain modelling of the transient asymmetric flooding of Ro-Ro ships

This work aims at contributing to improve knowledge on transient asymmetric flooding through theoretical and experimental research. First, a time domain theoretical model of ship motions and flooding is described. Results from experimental work are presented evidencing that transient asymmetric flooding may cause the capsizing of a Ro-Ro shaped barge. The theoretical model is used to predict the capsize of the Ro-Ro shaped barge. Reasonable agreement between experimental and theoretical results was found. Finally, a review of the European Gateway accident is given and the theoretical model is applied to the study of this type of accident. The conclusion is that this theoretical model, together with an accurate modelling of the flooding of machinery compartments, reproduces successfully the capsizing of the European Gateway due to transient asymmetric flooding. Therefore, the internal arrangement of Ro-Ro ships should be carefully studied at the design stage in order to avoid this phenomenon.     

Material selection for the gas containment system of a compressed natural gas carrier fleet

In this work, the possible exploitation of fiber-reinforced composites in the context of maritime transportation of compressed natural gas (CNG) is investigated. In addition to a more conventional steel configuration, two different fiber materials, carbon and glass, are considered as construction materials for pressure vessels (PVs) to be stored on board ships, with thickness optimized by FEM analysis.The considered scenario is represented by the transportation of CNG from an offshore well to a terminal on shore. Fleets of ships carrying CNG in pressure vessels manufactured with the investigated materials are generated by means of a ship synthesis model (SSM) software and compared on the basis of technical and economical indicators.The choice of the construction material influences considerably the weight of the PVs, which represent a major item of total ship weight and reflects directly on the general transport performances in terms of resistance, seakeeping and reliability in the service. On the other hand, capital as well as operating expenditures are considerably affected by the choice. When exploring the design space, the ship synthesis model is able, at a preliminary stage of the design, to account for the various technical and economical aspects, their implications and relationships. Results are presented of computations carried out in a specific case, identified by the annual gas production and other characteristics of the well terminal and a cruising route for the ships. The comparison is carried out on the basis of the cost per transported unit of gas and of the percentage of success in the transportation process. The computations show that the choice of the PV material has a key influence on the results in terms of optimal number, dimensions and speed of the ships.     

采用卫星高度计资料分析南海风、浪的月平均特征

在分析1987—1988年两年间Geosat卫星高度计遥感资料的基础上,给出了南海海面月平均风速和月平均有效波高的分布,以及沿南海NE－SW向的风、浪年变化特征;并与船舶报资料作了对比分析,其结果显示该高度计遥感资料与常规资料（船舶报资料）基本一致。     

European policies on ship recycling: A stakeholder survey

After almost a decade of intensive regulatory activities focused on ship-recycling around the world, special reference is made to combating the problems of ship dismantling practices on the shores of Southern Asian countries. “The Hong Kong International Convention” was adopted in 2009, to provide a uniform shipbreaking management approach. However, in globalised maritime transport, with the majority of shipowners using Open Registries, the European Union has prepared a common approach considering the implementation of a new legal framework. Regulation 1257/2013 implemented by the EU on ship-recycling should be more rigorous than those in the rest of the world. In this article, stakeholder perceptions of this Regulation are presented, based on an online survey. The results show significantly different perceptions in the ship-recycling industry regarding the developing ship-recycling measures within the EU.     

An experimental investigation into the influence of the damage openings on ship response

Ship motions after damage are difficult to evaluate since they are affected by complex phenomena regarding fluid and structures interactions. The possibility to better understand how ship behavior in damage is influenced by these phenomena is important for improving ship safety, especially for passenger vessel.In this paper an experimental campaign is carried out on a passenger ferry hull, to show the effects of the water dynamics across damage openings on ship motions. Novel aspects of this research include the study of the effects of the damage position on the ship roll response. The study is carried out for still water and for beam regular waves at zero speed.Results from the experiments carried out underline that the roll behavior of a damaged ship is affected by the position of damage opening and not only by its size. Assuming the same final equilibrium conditions after flooding but characterized by different damage openings it is possible to observe how motions RAOs and roll decay characteristics modify according to the opening locations.     

A moving PIV system for ship model test in a towing tank

A moving particle image velocimetry (PIV) system was successfully developed and used in a large towing tank for ship model tests to observe velocity fields near ship models. The experimental method involved adjustable optical devices for various test conditions and a special particle-seeding device. The streamwise and cross-streamwise flow fields of a yacht model and a tanker model were measured. Ship type, bottom shape, and towing speed were found to be the causes of problems affecting optical access and image quality. Possible solutions, deeper optical ducts, dark painting color, and pre-processed analysis method, were proposed and discussed.     

3D Modeling of sediment movement by ships-generated wakes in confined shipping channel

Ship-generated waves and return currents are capable of re-suspending significant quantities of bottom and bank sediments.However,most of the previous studies done on the subject do not show how and where sediment is re-suspended by the wakes and the directions of net transport.In this paper,a 3D numerical model based on hydro-sedimentary coupling is presented to search the relationship between the sediment movement,and the pattern of ship-generated waves around and far away from the vessel and the return currents around the ships.The hydrodynamic model is based on 3D Navier-Stokes equations including the standard k-ε model for turbulence processes,and the sediment transport model is based on a 3D equation for the re-suspended sediment transport.The computation results show that the areas of sediment concentration and transport(whether by resuspension or by the bedload) depend mainly on the position,the speed of the ship in the waterways,the kinematics of ship-generated waves and on the return flows.Thus,a map of sediment distribution and the modes of sediment transport generated by the passage of the ship are presented.     

Econometric analysis of the ship demolition market

The topic of ship recycling has obtained considerable attention during the last two decades for a variety of reasons with the likelihood of the adoption of a new international convention under the auspices of the International Maritime Organization (IMO). This study applies econometric modeling to a unique data set to provide insight into the dynamics of the ship recycling market. The data set contains information on 51,112 ships over 100 gt and includes 748,621 events over a period of 29 years. The analysis confirms a negative relationship of earnings and a positive relationship of scrap prices for all locations while Bangladesh seems to be more sensitive to changes in earnings than the other locations and more likely demolishes larger and older vessels. The results for flag and ownership vary across scrapping locations with Malta and Cyprus indicating potential importance from a registry perspective. The overall safety profile of a vessel seems to be less important towards the probability of a ship being scrapped. Possible implementation of the convention at EU level will mostly likely affect Turkey while non-ratification of one of the major flags will most likely affect China or Bangladesh.