Optical spectrum based measurement of flotation slurry contents

Monitoring and control of a flotation circuit is mainly based on the information gained by assaying the process slurry lines. In flotation plants, usually an X-ray fluorescence analyzer is used to obtain the on-line assays. This article introduces the visual and near-infrared reflectance spectroscopic analysis of the process slurries as a supplementary method which complements the on-line assay information available from an X-ray fluorescence analyzer. It is shown that the spectral information can be used to accurately predict the element contents in the slurry in between successive XRF analyses. Since the spectral measurements can be taken with high frequency as opposed to the sparse X-ray fluorescence analysis, a practically continuous on-line estimate of the slurry contents is reached. These estimates can be used in the plant control to improve the overall performance of the circuits and to yield also economical savings. Additionally, the frequent monitoring of the grades can provide means to eliminate rapid disturbances in the circuits, thus improving the stability of the process.     

Organic petrography of graptolite fragments from Turkey

The reflectance and bireflectance of graptolite fragments (Silurian-Ordovician) from southeast Turkey were examined and the morphology was described using reflected light microscopy. The dispersion of maximum and minimum reflectance of graptolites sectioned parallel and perpendicular to the bedding was also determined. The graptolites were anisotropic and the anisotropy was stronger for sections perpendicular to the bedding. The graptolite fragments show two types of surface morphology: granular and non-granular. The granular type had a rough surface and granular anisotropy, the non-granular fragments showed a smooth surface and basic anisotropy. The fine internal structure of graptolite was evident under crossed-polars. The reflectance of graptolite increased with depth and was higher than other organic material, e.g. bitumen, found in the same sediment. The present study indicates that the reflectance of graptolite in sediment can be used to determine the maturity of the dediment.     

煤田火区烧变岩光谱特征分析及其信息提取

中国北方煤田煤层自燃现象非常严重.利用遥感手段可以快速实现火区的动态监测,及时为灭火工程提供信息.烧变岩作为火区的地表指示性特征,是火区解译最直观的信息.本文从烧变岩的反射光谱曲线特征入手,对几种提取烧变岩信息的方法进行比较,从而确定解译烧变岩的最佳方法,为圈定火区的范围和位置奠定基础.     

Organic geochemistry and petrology of barren and Mo–Ni–PGE mineralized marine black shales of the Lower Cambrian Niutitang Formation (South China)

Marine black shales of the Lower Cambrian Niutitang Formation in southern China host Mo–Ni–platinum group elements (PGE) mineralization confined to a phosphate- and pyrite-rich stratiform body (max. 20-cm thick). The H/C atomic ratio, carbon isotopic composition, FTIR spectra of bulk organic matter, and spectra of extractable part of organic matter indicate similar sources and thermal evolution of organic matter in barren and mineralized black shales.The morphology and relative abundance of organic particles in barren and mineralized shales are different. In barren black shales, organic particles comprise only elongated bodies and laminae 2–10 μm across or elongated larger bodies (> 10 μm) with R_max = 2.96–5.21% (Type I particles). Mineralized black shales contain Type I particles in rock matrix (90–95 vol%), small veinlets or irregular organic accumulations (Type II particles, 1–5 vol%) that display weak to well developed mosaic texture and a variable reflectance (R_max = 3.55–8.65%), and small (< 1 to 5 μm) rounded or irregular Type III organic particles (1–4 vol%) distributed within phosphate nodules and sulphide rip-up clasts. Type III particles show similar reflectance as particles of Type I in rock matrix. Type I particles are interpreted as remnants of in situ bacterially reworked organic matter of cyanobacteria/algal type, Type II as solidified products or oil-derived material (migrabitumen), and Type III particles as remnants of original organic matter in phosphatized or sulphidized algal/microbial oncolite-like bodies. Equivalent vitrinite reflectances of Type I and III particles in barren and mineralized rocks are similar and correspond to semi-anthracite and anthracite. Micro-Raman spectra of organic particles in rocks display a wide belt in the area of 1600 cm^− 1 (G belt) and approximately the same belt in the area of 1350 cm^− 1 (D belt). The ratio of integrated areas of the two belts correlate with R_max values.The Mo–Ni–PGE mineralized body is interpreted as to represent a remnant of phosphate- and sulphide-rich subaquatic hardground supplied with organic material derived from plankton and benthic communities as well as with algal/microbial oncolite-like bodies that originated in wave-agitated, shallow-water, nearshore environment.     

机载成像光谱仪的外定标方法

该文描述了基于反射率方法的机载中分辨率成像光谱仪（AMODIS）外定标方法。可见光和近红外波段的17个通道定标结果表明,成像光谱仪两个飞行高度测值的外定标系数是非常吻合的,其相对差为0.19%～3.89%;成像光谱仪关于草地航测的反演值与地面实测值比较,结果也是比较接近的。     

Evidence for surface variegation in Rosetta OSIRIS images of asteroid 2867 Šteins

The OSIRIS camera onboard Rosetta successfully acquired images of asteroid 2867 Steins through a variety of color filters during the flyby on 5 September 2008. The best images of this 5 km diameter asteroid have a resolution of 78 m per pixel. We process the images by deconvolving with the point spread function and enlarging through the Mitchell-Netravali filter. The enhanced set is analyzed by means of various techniques (PCA, band ratios, stereo anaglyphs) to study surface morphology and search for variegation. We identify a landslide, which supports a YORP origin for Steins’ unusual diamond shape. In addition, we find that the interior of one of two large craters on the south pole is bluer than the rest of the body.     

Prediction of soil properties using imaging spectroscopy: Considering fractional vegetation cover to improve accuracy

Spectroscopic techniques have become attractive to assess soil properties because they are fast, require little labor and may reduce the amount of laboratory waste produced when compared to conventional methods. Imaging spectroscopy (IS) can have further advantages compared to laboratory or field proximal spectroscopic approaches such as providing spatially continuous information with a high density. However, the accuracy of IS derived predictions decreases when the spectral mixture of soil with other targets occurs. This paper evaluates the use of spectral data obtained by an airborne hyperspectral sensor (ProSpecTIR-VS – Aisa dual sensor) for prediction of physical and chemical properties of Brazilian highly weathered soils (i.e., Oxisols). A methodology to assess the soil spectral mixture is adapted and a progressive spectral dataset selection procedure, based on bare soil fractional cover, is proposed and tested. Satisfactory performances are obtained specially for the quantification of clay, sand and CEC using airborne sensor data (R² of 0.77, 0.79 and 0.54; RPD of 2.14, 2.22 and 1.50, respectively), after spectral data selection is performed; although results obtained for laboratory data are more accurate (R² of 0.92, 0.85 and 0.75; RPD of 3.52, 2.62 and 2.04, for clay, sand and CEC, respectively). Most importantly, predictions based on airborne-derived spectra for which the bare soil fractional cover is not taken into account show considerable lower accuracy, for example for clay, sand and CEC (RPD of 1.52, 1.64 and 1.16, respectively). Therefore, hyperspectral remotely sensed data can be used to predict topsoil properties of highly weathered soils, although spectral mixture of bare soil with vegetation must be considered in order to achieve an improved prediction accuracy.     

Non-destructive estimation of foliar chlorophyll and carotenoid contents: Focus on informative spectral bands

Leaf pigment content provides valuable insight into the productivity, physiological and phenological status of vegetation. Measurement of spectral reflectance offers a fast, nondestructive method for pigment estimation. A number of methods were used previously for estimation of leaf pigment content, however, spectral bands employed varied widely among the models and data used. Our objective was to find informative spectral bands in three types of models, vegetation indices (VI), neural network (NN) and partial least squares (PLS) regression, for estimating leaf chlorophyll (Chl) and carotenoids (Car) contents of three unrelated tree species and to assess the accuracy of the models using a minimal number of bands. The bands selected by PLS, NN and VIs were in close agreement and did not depend on the data used. The results of the uninformative variable elimination PLS approach, where the reliability parameter was used as an indicator of the information contained in the spectral bands, confirmed the bands selected by the VIs, NN, and PLS models. All three types of models were able to accurately estimate Chl content with coefficient of variation below 12% for all three species with VI showing the best performance. NN and PLS using reflectance in four spectral bands were able to estimate accurately Car content with coefficient of variation below 14%. The quantitative framework presented here offers a new way of estimating foliar pigment content not requiring model re-parameterization for different species. The approach was tested using the spectral bands of the future Sentinel-2 satellite and the results of these simulations showed that accurate pigment estimation from satellite would be possible.     

矿物白度的影响因素与增白机理研究

白度是矿物的重要光学性质之一。为了深化矿物的光学性质及白色矿物功能材料的研究与应用,根据测试分析结果和叶大年的结构光性矿物学理论,系统研究了影响矿物白度的主要因素,以及矿物增白效果的差异性及其产生机理。研究结果表明:(1)晶体化学是决定不同种类透明矿物白度的最主要因素,但对于某种透明矿物来说,影响其白度的主要因素是矿物中的碳质有机质、含铁钛矿物杂质、杂质元素的价态与晶体化学环境、介质环境、矿物中的水和粒度大小等。(2)证明了透明矿物白度大小与折射率呈正相关。白度相同的不同矿物的增白效果存在很大差异性,其根本原因是由矿物折射率所决定的反射率存在很大差别。(3)提出了真白度和假白度的概念,即主要由自色产生的白度称为真白度,主要由假色产生的白度称为假白度;真白度高的矿物具有增白作用,而真白度低的矿物,即使粉末白度高,也没有增白作用。(4)在影响矿物白度的主要因素中,矿物中的碳质有机质、含铁钛矿物杂质、杂质元素的价态等杂质成分对矿物白度和增白效果起负面作用。(5)矿物中与晶体结构相关的水所产生的颜色属于自色,脱去结晶水、层间水和结构水都有利于提高矿物的真白度或增白效果,但脱去沸石水的效果正好相反;由矿物粒度大小变化产生的颜色属于假色;通过降低粉体粒度大小所提高的白度属于假白度,由此增加的白度没有增白作用。另外,矿物粉体与使用介质之间的折射率大小差别越大,增白效果越明显。