GIS空间数据的采集误差及其分析

本文详细阐述了GIS数据采集过程中的误差来源，重点分析了通过地图、遥感和摄影测量等方式采集数据所产生的误差及其特性，分析了其对GIS数据的影响与消减方法。     

JX—3解析测图仪上航测高倍放大成图的试验

介绍试用１：３３０００比例尺航测资料，在ＪＸ－３解析测图仪上高倍放大航测１：１０００比例尺地形图的成图方案和应采取的技术措施，运用 解析法模型绝对定向的原理，在全野布点时采用两种方案对照比较，进行理论和试验精度的分析，并给出试验结果。     

机载POS系统对地定位方法初探

高精度定位定向系统(Position&;OrientationSystem,简称POS系统)能够获取机载传感器的空间位置和三轴姿态信息,从而定量化反演遥感信息获取过程,实现机载遥感直接对地定位(DirectGeoreferencing)。本文首先介绍POS与航空摄影系统的集成方法与工作原理;然后初步分析了POS系统的主要误差来源,在此基础上,研究了POS系统数据处理及误差控制方法;最后,结合河南安阳飞行试验数据的分析处理结果,进行了精度和可行性分析。     

High precision analysis of an embryonic extensional fault-related fold using 3D orthorectified virtual outcrops: The viewpoint importance in structural geology

Image-based 3D modeling has recently opened the way to the use of virtual outcrop models in geology. An intriguing application of this method involves the production of orthorectified images of outcrops using almost any user-defined point of view, so that photorealistic cross-sections suitable for numerous geological purposes and measurements can be easily generated. These purposes include the accurate quantitative analysis of fault-fold relationships starting from imperfectly oriented and partly inaccessible real outcrops. We applied the method of image-based 3D modeling and orthorectification to a case study from the northern Apennines, Italy, where an incipient extensional fault affecting well-layered limestones is exposed on a 10-m-high barely accessible cliff. Through a few simple steps, we constructed a high-quality image-based 3D model of the outcrop. In the model, we made a series of measurements including fault and bedding attitudes, which allowed us to derive the bedding-fault intersection direction. We then used this direction as viewpoint to obtain a distortion-free photorealistic cross-section, on which we measured bed dips and thicknesses as well as fault stratigraphic separations. These measurements allowed us to identify a slight difference (i.e. only 0.5°) between the hangingwall and footwall cutoff angles. We show that the hangingwall strain required to compensate the upward-decreasing displacement of the fault was accommodated by this 0.5° rotation (i.e. folding) and coeval 0.8% thickening of strata in the hangingwall relatively to footwall strata. This evidence is consistent with trishear fault-propagation folding. Our results emphasize the viewpoint importance in structural geology and therefore the potential of using orthorectified virtual outcrops.     

微型无人机在“现代摄影测量实习”课程教学改革中的应用

“现代摄影测量实习”是中国地质大学(北京)土地科学技术学院测绘工程专业的重要实习课程,直接关系到学生的测绘技能培养。本文以笔者的教学实践为基础,从教学内容、教学方法、实践过程等方面探讨“现代摄影测量实习”实践中的教学改革问题,以帮助测绘工程专业学生获得良好的现代摄影测量技能,提高其就业与科研核心竞争力。     

基于无人机摄影测量的增减挂钩耕地指标检查与评价方法

土地增减挂钩项目的质量检查的传统流程需到实地逐一核实,检查周期长。本文提出一种基于无人机航摄的检查技术流程,结合研发的野外实地调绘软件系统,提出一种新型的基于无人机航摄的增减挂钩项目质量检查流程,并基于DOM检查构建指标评价体系。流程优化了传统外业检查流程,实现地块的全覆盖内业检查和外业的实时取证,确保成果耕地质量指标的准确性,对土地增减挂钩项目给予客观评价。评价体系的应用选取广西几个县增减挂钩为研究对象,探究体系评价的合理性,初步确定该方法基本可行。     

Accuracy assessment of digital elevation models by means of robust statistical methods

Measures for the accuracy assessment of Digital Elevation Models (DEMs) are discussed and characteristics of DEMs derived from laser scanning and automated photogrammetry are presented. Such DEMs are very dense and relatively accurate in open terrain. Built-up and wooded areas, however, need automated filtering and classification in order to generate terrain (bare earth) data when Digital Terrain Models (DTMs) have to be produced. Automated processing of the raw data is not always successful. Systematic errors and many outliers at both methods (laser scanning and digital photogrammetry) may therefore be present in the data sets. We discuss requirements for the reference data with respect to accuracy and propose robust statistical methods as accuracy measures. Their use is illustrated by application at four practical examples. It is concluded that measures such as median, normalized median absolute deviation, and sample quantiles should be used in the accuracy assessment of such DEMs. Furthermore, the question is discussed how large a sample size is needed in order to obtain sufficiently precise estimates of the new accuracy measures and relevant formulae are presented.     

1996-2000年中国摄影测量与遥感进展

本文总结了从1996年到2000年中国摄影测量与遥感以及地理信息系统等方面的成就，内容涉及，数据获得取与数据管理，航空航天遥感系统及其软硬件，GIS软硬件，摄影测量，遥感及空间信息系统的原理与算法，摄影测量，遥感及空间信息的应用等。     

分离式靶标摄影测量在LAMOST中的应用

为了获取LAMOST焦面板上光纤的零位位置,提出了一种基于分离式标准靶标的高精度摄影测量方法。首先,根据Tsai摄像机标定参数模型介绍了CCD相机的标定原理。然后介绍了用光重心算法求取靶标发光点像面坐标及通过球面三角公式计算靶标发光点物面坐标。接着,利用最小二乘法导出了含标定参数的方程组。最后,介绍了标准靶标的放置方法以及提高光纤位置测量精度的靶标取法。实验结果表明:CCD相机的标定残差平均值为8.8μm;标定残差的标准差为5.3μm。测量方法简单易行,通过仔细分析,找出了残差偏大的原因,对后续进一步测量实验有重要指导意义。     

A community-based urban forest inventory using online mapping services and consumer-grade digital images

Community involvement in gathering and submitting spatially referenced data via web mapping applications has recently been gaining momentum. Urban forest inventory data analyzed by programs such as the i-Tree ECO inventory method is a good candidate for such an approach. In this research, we tested the feasibility of using spatially referenced data gathered and submitted by non-professional individuals through a web application to augment urban forest inventory data. We examined the use of close range photogrammetry solutions of images taken by consumer-grade cameras to extract quantitative metric information such as crown diameter, tree heights and trunk diameters. Several tests were performed to evaluate the accuracy of the photogrammetric solutions and to examine their use in addition to existing aerial image data to supplement or partially substitute for standard i-Tree ECO field measurements.