Freely floating-body simulation by a 2D fully nonlinear numerical wave tank

Nonlinear interactions between large waves and freely floating bodies are investigated by a 2D fully nonlinear numerical wave tank (NWT). The fully nonlinear 2D NWT is developed based on the potential theory, MEL/material-node time-marching approach, and boundary element method (BEM). A robust and stable 4th-order Runge–Kutta fully updated time-integration scheme is used with regriding (every time step) and smoothing (every five steps). A special φ_n-η type numerical beach on the free surface is developed to minimize wave reflection from end-wall and wave maker. The acceleration-potential formulation and direct mode-decomposition method are used for calculating the time derivative of velocity potential. The indirect mode-decomposition method is also independently developed for cross-checking. The present fully nonlinear simulations for a 2D freely floating barge are compared with the corresponding linear results, Nojiri and Murayama’s (Trans. West-Jpn. Soc. Nav. Archit. 51 (1975)) experimental results, and Tanizawa and Minami’s (Abstract for the 6th Symposium on Nonlinear and Free-surface Flow, 1998) fully nonlinear simulation results. It is shown that the fully nonlinear results converge to the corresponding linear results as incident wave heights decrease. A noticeable discrepancy between linear and fully nonlinear simulations is observed near the resonance area, where the second and third harmonic sway forces are even bigger than the first harmonic component causing highly nonlinear features in sway time series. The surprisingly large second harmonic heave forces in short waves are also successfully reproduced. The fully updated time-marching scheme is found to be much more robust than the frozen-coefficient method in fully nonlinear simulations with floating bodies. To compare the role of free-surface and body-surface nonlinearities, the body-nonlinear-only case with linearized free-surface condition was separately developed and simulated.     

Fully nonlinear numerical wave tank (NWT) simulations and wave run-up prediction around 3-D structures

A finite-difference scheme and a modified marker-and-cell (MAC) algorithm have been developed to investigate the interactions of fully nonlinear waves with two- or three-dimensional structures of arbitrary shape. The Navier–Stokes (NS) and continuity equations are solved in the computational domain and the boundary values are updated at each time step by the finite-difference time-marching scheme in the framework of a rectangular coordinate system. The fully nonlinear kinematic free-surface condition is implemented by the marker-density function (MDF) technique developed for two fluid layers.To demonstrate the capability and accuracy of the present method, the numerical simulation of backstep flows with free-surface, and the numerical tests of the MDF technique with limit functions are conducted. The 3D program was then applied to nonlinear wave interactions with conical gravity platforms of circular and octagonal cross-sections. The numerical prediction of maximum wave run-up on arctic structures is compared with the prediction of the Shore Protection Manual (SPM) method and those of linear and second-order diffraction analyses based on potential theory and boundary element method (BEM). Through this comparison, the effects of non-linearity and viscosity on wave loading and run-up are discussed.     

Computation of wind-wave spectra in coastal waters with SWAN on unstructured grids

An unstructured-grid procedure for SWAN is presented. It is a vertex-based, fully implicit, finite difference method which can accommodate unstructured meshes with a high variability in geographic resolution suitable for representing complicated bottom topography in shallow areas and irregular shoreline. The numerical solution is found by means of a point-to-point multi-directional Gauss–Seidel iteration method requiring a number of sweeps through the grid. The approach is stable for any time step while permitting local mesh refinements in areas of interest. A number of applications are shown to verify the correctness and numerical accuracy of the unstructured version of SWAN.     

Remote electronic monitoring and the landing obligation – some insights into fishers’ and fishery inspectors’ opinions

The European fisheries management is currently undergoing a fundamental change in the handling of catches of commercial fisheries with the implementation of the 2013 Common Fisheries Policy. One of the main objectives of the policy is to end the practice of discarding in the EU by 2019. However, for such changes to be successful, it is vital to ensure stakeholders acceptance, and it is prudent to consider possible means to verify compliance with the new regulation. Remote Electronic Monitoring (REM) with Closed-Circuit Television (CCTV) has been tested in a variety of fisheries worldwide for different purposes and is currently considered as one possible tool to ensure compliance with a European ban on discards.This study focuses on Danish fishery inspectors and on fishers with REM experience, whose opinions are less well known. Their views on the landing obligation and on the use of REM were investigated using interviews and questionnaires, and contrasted to some fishers without REM experience. 80% of fishery inspectors and 58% of REM-experienced fishers expressed positive views on REM. 9 out of 10 interviewed fishers without REM experience were against REM. Participation in a REM trial has not led to antipathy towards REM. Fishery inspectors saw on-board observers, at-sea control and REM as the three best solutions to control the landing obligation but shared the general belief that the landing obligation cannot be enforced properly and will be difficult for fishers to comply with. The strengths and weaknesses of REM in this context are discussed.     

A numerical study of the behavior of fully grouted rockbolts under dynamic loading

The widespread preference for rockbolts in providing adequate rock stability in underground mines and man-made cavities make it necessary to obtain a better understanding of the response of these support systems. It is widely accepted that the fully grouted rockbolts provide better roof stability in areas of very poor roof condition which may be caused by high ground stress conditions. There is little information about the in situ behavior of these systems especially under dynamic loading. Hence, to study the behavior of fully grouted rockbolts under dynamic loading, a numerical modeling study was conducted using the FLAC^3D code. In this study the behavior of three types of fully grouted rockbolts were compared with each other including rockbolts with and without head plate and a yielding type one. The results of analyses indicated that under dynamic loading the fully grouted rockbolts without the head plate are incapable of controlling the rock mass movement. Although fully grouted rockbolts with head plate damp a considerable amount of the dynamic energy through friction as these bolts slide within the grout, but the elongation of the rockbolt is not possible due to the rapid breakage of the rockbolt–grout interface. Yielding rockbolts are the best choice for the absorption of the dynamic stress wave and controlling of the rock mass movement. The obtained results show that the optimal design of yielding rockbolt should be in such a way that after dynamic loading, anchoring part of bolt has a limited movement to prevent stress concentration in the shaft of rockbolt and its breakage.     

Seepage driving effect on deformations of San Fernando dams

In the process of flow deformation of an earth dam, the seepage force inside the dam plays a role as a driving force. The seepage force acts just like the gravitational force in terms of pushing soils away from their original locations after liquefaction is triggered. This paper draws attention to this seepage driving effect by presenting a set of fully coupled finite element analyses on the well-known San Fernando dams, with the objective of evaluating the impact of this seepage effect. The results indicate that while this effect is always there, its practical significance depends on a number of factors. In the case of the upper San Fernando dam, which experienced a significant, but restricted, downstream movement during the 1971 earthquake, the seepage driving effect was indeed significant. On the contrary, for the lower dam, which failed and slid into the upstream reservoir during the same earthquake, this seepage effect was relatively less pronounced. The detailed results of the analyses reveal the likely mechanisms of failure and deformation of the two dams and the likely cause behind the difference between their responses during the earthquake.     

Effect of wave nonlinearity on fatigue damage and extreme responses of a semi-submersible floating wind turbine

Floating wind turbine has been the highlight in offshore wind industry lately. There has been great effort on developing highly sophisticated numerical model to better understand its hydrodynamic behaviour. A engineering-practical method to study the nonlinear wave effects on floating wind turbine has been recently developed. Based on the method established, the focus of this paper is to quantify the wave nonlinearity effect due to nonlinear wave kinematics by comparing the structural responses of floating wind turbine when exposed to irregular linear Airy wave and fully nonlinear wave. Critical responses and fatigue damage are studied in operational conditions and short-term extreme values are predicted in extreme conditions respectively. In the operational condition, wind effects are dominating the mean value and standard deviation of most responses except floater heave motion. The fatigue damage at the tower base is dominated by wind effects. The fatigue damage for the mooring line is more influenced by wind effects for conditions with small wave and wave effects for conditions with large wave. The wave nonlinearity effect becomes significant for surge and mooring line tension for large waves while floater heave, pitch motion, tower base bending moment and pontoon axial force are less sensitive to the nonlinear wave effect. In the extreme condition, linear wave theory underestimates wave elevation, floater surge motion and mooring line tension compared with fully nonlinear wave theory while quite close results are predicted for other responses.     

Numerical modeling of multiphase fluid flow in deforming porous media: A comparison between two- and three-phase models for seismic analysis of earth and rockfill dams

In this paper, a fully coupled numerical model is presented for the finite element analysis of the deforming porous medium interacting with the flow of two immiscible compressible wetting and non-wetting pore fluids. The governing equations involving coupled fluid flow and deformation processes in unsaturated soils are derived within the framework of the generalized Biot theory. The displacements of the solid phase, the pressure of the wetting phase and the capillary pressure are taken as the primary unknowns of the present formulation. The other variables are incorporated into the model using the experimentally determined functions that define the relationship between the hydraulic properties of the porous medium, i.e. saturation, relative permeability and capillary pressure. It is worth mentioning that the imposition of various boundary conditions is feasible notwithstanding the choice of the primary variables. The modified Pastor–Zienkiewicz generalized constitutive model is introduced into the mathematical formulation to simulate the mechanical behavior of the unsaturated soil. The accuracy of the proposed mathematical model for analyzing coupled fluid flows in porous media is verified by the resolution of several numerical examples for which previous solutions are known. Finally, the performance of the computational algorithm in modeling of large-scale porous media problems including the large elasto-plastic deformations is demonstrated through the fully coupled analysis of the failure of two earth and rockfill dams. Furthermore, the three-phase model is compared to its simplified one which simulates the unsaturated porous medium as a two-phase one with static air phase. The paper illustrates the shortcomings of the commonly used simplified approach in the context of seismic analysis of two earth and rockfill dams. It is shown that accounting the pore air as an independent phase significantly influences the unsaturated soil behavior.     

不同规格化的引潮位展开及其转换

引入完全规格化的缔合勒让德函数,阐述国际上两类不同规格化的引潮位展开,使引潮位函数表达更加简明,大地系数定义更加规范. 由此得到由Doodson规格化与Hartmann & Wenzel规格化之间的转换系数.