基于Mindlin理论Winkler地基参数的Kalman滤波识别

提出了Winkler地基参数的Kalman滤波识别方法。引入Mindlin理论后,推导了Winkler地基上板的控制微分方程。利用Fourier变换,推求了Winkler地基上简支板的Fourier闭式解。推导了Winkler地基参数的Kalman滤波方程,研究了Winkler地基参数的Kalman滤波识别的具体计算步骤。研究表明,运用Kalman滤波理论进行Winkler地基参数的识别,能有效地估计Winkler地基参数;Winkler地基参数的滤波收敛速度和精度受地基参数初始值选取和位移实测资料的影响,且Kalman滤波理论也可用于其他地基模型地基参数的识别。     

Internal generation of waves: Delta source function method and source term addition method

In this study, we investigate two internal wave generation methods in numerical modeling of time-dependent equations for water wave propagation, i.e., delta source function method and source term addition method, the latter of which has been called the line source method in literatures. We derive delta source functions for the Boussinesq-type equations and extended mild-slope equations. By applying the fractional step splitting method, we show that the delta source function method is equivalent to the source term addition method employing the energy velocity. This suggests that the energy velocity should be used rather than the phase velocity for the transport of incident wave energy in the source term addition method. Finally, the performance of the delta source function method is verified by accurately generating nonlinear cnoidal waves as well as linear waves for horizontally one-dimensional cases.     

Generation of random waves in time-dependent extended mild-slope equations using a source function method

We develop techniques of numerical wave generation in the time-dependent extended mild-slope equations of Suh et al. [1997. Time-dependent equations for wave propagation on rapidly varying topography. Coastal Engineering 32, 91–117] and Lee et al. [2003. Extended mild-slope equation for random waves. Coastal Engineering 48, 277–287] for random waves using a source function method. Numerical results for both regular and irregular waves in one and two horizontal dimensions show that the wave heights and the frequency spectra are properly reproduced. The waves that pass through the wave generation region do not cause any numerical disturbances, showing usefulness of the source function method in avoiding re-reflection problems at the offshore boundary.     

使用水块混合层模式模拟上层海洋的季节变化

使用块体混合层模式对一个固定海洋观测站所测的上层海洋之物理特性进行了模拟，结果发现了难以重复观测到的许多物理特征。文章提出了水块混合层模式，着重模拟了扩展湾流体系（ＥＧＳＳ）中的一个水块，在它被海流从佛罗里达海峡（２４°Ｎ，８０°Ｗ）带到挪威海（６８°Ｎ，１０°Ｅ）的过程中，其物理特性（其中包括温度、盐度、混合层深度和夹卷速度）随时间的变化。模拟结果较好地再现了所观测的物理特性的演化。     

Parameter sensitivity of three Kalman filter schemes for assimilation of water levels in shelf sea models

In applications of data assimilation algorithms, a number of poorly known assimilation parameters usually need to be specified. Hence, the documented success of data assimilation methodologies must rely on a moderate sensitivity to these parameters. This contribution presents a parameter sensitivity study of three well known Kalman filter approaches for the assimilation of water levels in a three dimensional hydrodynamic modelling system. The filters considered are the ensemble Kalman filter (EnKF), the reduced rank square root Kalman filter (RRSQRT) and the steady Kalman filter. A sensitivity analysis of key parameters in the schemes is undertaken for a setup in an idealised bay. The sensitivity of the resulting root mean square error (RMSE) is shown to be low to moderate. Hence the schemes are robust within an acceptable range and their application even with misspecified parameters is to be encouraged in this perspective. However, the predicted uncertainty of the assimilation results are sensitive to the parameters and hence must be applied with care. The sensitivity study further demonstrates the effectiveness of the steady Kalman filter in the given system as well as the great impact of assimilating even very few measurements.     

A singular evolutive extended Kalman filter to assimilate ocean color data in a coupled physical–biochemical model of the North Atlantic ocean

Within the European DIADEM project, a data assimilation system for coupled ocean circulation and marine ecosystem models has been implemented for the North Atlantic and the Nordic Seas. One objective of this project is to demonstrate the relevance of sophisticated methods to assimilate satellite data such as altimetry, surface temperature and ocean color, into realistic ocean models. In this paper, the singular evolutive extended Kalman (SEEK) filter, which is an advanced assimilation scheme where three-dimensional, multivariate error statistics are taken into account, is used to assimilate ocean color data into the biological component of the coupled system. The marine ecosystem model, derived from the FDM model [J. Mar. Res. 48 (1990) 591], includes 11 nitrogen and carbon compartments and describes the synthesis of organic matter in the euphotic zone, its consumption by animals of upper trophic levels, and the recycling of detritic material in the deep ocean. The circulation model coupled to the ecosystem is the Miami isopycnic coordinate ocean model (MICOM), which covers the Atlantic and the Arctic Oceans with an enhanced resolution in the North Atlantic basin. The model is forced with realistic ECMWF ocean/atmosphere fluxes, which permits to resolve the seasonal variability of the circulation and mixed layer properties. In the twin assimimation experiments reported here, the predictions of the coupled model are corrected every 10 days using pseudo-measurements of surface phytoplankton as a substitute to chlorophyll concentrations measured from space. The diagnostics of these experiments indicate that the assimilation is feasible with a reduced-order Kalman filter of small rank (of order 10) as long as a sufficiently good identification of the error structure is available. In addition, the control of non-observed quantities such as zooplankton and nitrate concentrations is made possible, owing to the multivariate nature of the analysis scheme. However, a too severe truncation of the error sub-space downgrades the propagation of surface information below the mixed layer. The reduction of the actual state vector to the surface layers is therefore investigated to improve the estimation process in the perspective of sea-viewing wide field-of-view sensor (SeaWiFS) data assimilation experiments.     

Coupling a two-way nested primitive equation model and a statistical SST predictor of the Ligurian Sea via data assimilation

A primitive equation model and a statistical predictor are coupled by data assimilation in order to combine the strength of both approaches. In this work, the system of two-way nested models centred in the Ligurian Sea and the satellite-based ocean forecasting (SOFT) system predicting the sea surface temperature (SST) are used. The data assimilation scheme is a simplified reduced order Kalman filter based on a constant error space. The assimilation of predicted SST improves the forecast of the hydrodynamic model compared to the forecast obtained by assimilating past SST observations used by the statistical predictor. This study shows that the SST of the SOFT predictor can be used to correct atmospheric heat fluxes. Traditionally this is done by relaxing the model SST towards the climatological SST. Therefore, the assimilation of SOFT SST and climatological SST are also compared.     

一种新型非线性滤波理论及其应用

研究一种新型的非线性滤波理论,即Unscented卡尔曼滤波（UKF）,同时为了获得更高的计算效率和确保协方差阵的非负定性,研究了平方根UKF。将UKF和平方根UKF应用到星载GPS卫星定轨中,实际算例表明UKF和平方根UKF的性能要优于常用的推广卡尔曼滤波的性能。     

Bringing GPS into harsh environments for fully automated deformation monitoring

Engineering projects that require deformation monitoring frequently utilize geodetic sensors to measure displacements of target points located in the deformation zone. In situations where control stations and targets are separated by a kilometer or more, GPS can offer higher precision position updates at more frequent intervals than can normally be achieved using total station technology. For large-scale deformation projects requiring the highest precision, it is therefore advisable to use a combination of the two sensors. In response to the need for high precision, continuous GPS position updates in harsh deformation monitoring environments, a software has been developed that employs triple-differenced carrier-phase measurements in a delayed-state Kalman filter. Two data sets were analyzed to test the capabilities of the software. In the first test, a GPS antenna was displaced using a translation stage to mimic slow deformation. In the second test, data collected at a large open pit mine were processed. It was shown that the delayed-state Kalman filter developed could detect millimeter-level displacements of a GPS antenna. The actual precision attained depends upon the amount of process noise infused at each epoch to accommodate the antenna displacements. Higher process noise values result in quicker detection times, but at the same time increase the noise in the solutions. A slow, 25 mm displacement was detected within 30 min of the full displacement with sigma values in E, N and U of ±10 mm or better. The same displacement could also be detected in less than 5 h with sigma values in E, N and U of ±5 mm or better. The software works best for detecting long period deformations (e.g., 20 mm per day or less) for which sigma values of 1–2 mm are attained in all three solution components. It was also shown that the triple-differenced carrier-phase observation can be used to significantly reduce the effects of residual tropospheric delay that would normally plague double-differenced observations in harsh GPS environments.