LAMOST总控系统程序设计

国家重大科学工程项目LAMOST总控系统的程序设计是一个庞大的软件工程．其总控系统下共包括8个既相互独立又互有关联的子系统．如何通过良好的软件设计方法来处理好这8个子系统之间的关系使其协调运转，以及如何确保软件开发的可维护性、可持续性是研究重点．     

REVIEWS OF GEOGRAPHIC SOFTWARE

Reviews of geographic software in this article: DEMO-GRAPHICS: WORLD POPULATIONS AND PROJECTIONS. ESP GAUSS. CEMODEL S. Damus LIMDEP. William H. Greene MICROSTAT 4.1 OTIS PCIPS. (Personal Computer Image Processing System) . H.J. Meyers and R. Bernstein. REGRESSION ANALYSIS OF TIME SERIES (RATS) SPSS/PC+ URBAN DATA MANAGEMENT SOFTWARE (UDMS)     

Experimental solidification of anhydrous latitic and trachytic melts at different cooling rates: The role of nucleation kinetics

Two sets of cooling experiments were run at atmospheric conditions for two anhydrous starting latitic and trachytic melts: 1) five cooling rates (25, 12.5, 3, 0.5, and 0.125 °C/min) between 1300° and 800 °C, and 2) a 0.5 °C/min cooling rate from 1300 °C with quench temperatures at 1200°, 1100°, 1000° and 900 °C. Trachytic run-products are invariably glassy. Nucleation is also suppressed in the latitic run-products at the three highest cooling rates. Conversely, in the 0.5 and 0.125 °C/min runs, latites have a crystal content of  90 vol.%. The phases are: plagioclase, clinopyroxene, glass and iron-bearing oxide (in order of abundance). The variable quench temperatures, investigated by coupling experiments with Pt wire and Pt capsule sample containers in set 2, again did not produce crystallization of trachyte, whereas latitic samples are characterized by  10 vol.% of oxides, pyroxenes and plagioclase (in order of appearance), at temperature < 1000 °C. Effects of (preferential) heterogeneous nucleation on sample holders, of superheating degree, and chemical species loss during cooling are absent for both melt compositions. The difference of solidification paths between these two silicate melts can be ascribed only to their small chemical differences. In comparison with calculated equilibrium conditions all the experimental latitic and trachytic run-products revealed strong kinetic effects, interpretable in the light of the nucleation theory. The glass-forming ability (GFA) of trachyte is higher, whereas their critical cooling rate (Rc) is lower (< 0.125 °C/min), in comparison to latitic melts (Rc > 0.5 °C/min). The experimental results carried out in this study can be applied to lava flows and domes; trachytic lavas are able to flow for longer period with respect to latitic ones in a metastable condition. Glass-rich terrestrial lavas, i.e. obsidians, can be the result of sluggish nucleation kinetics due to the relative high polymerisation of evolved silicate melts.     

Dynamic analysis of a vertical plate exposed to breaking wave impact

From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of p_max/γH₀≤18.     

A Linear Programming Model for Seabed Oil-Gas Pipe Network

This paper analyzes the pipe network system of oil-gas collection and transportation foroffshore oilfield development.A"0-1"integer linear programming model is constructed to optimize theinvestment of seabed pipe network.The mathematical model is solved by the spanning tree method ofgraph theory and network analysis.All spanning trees of a network graph compose all the feasible solu-tions of the mathematical model.The optimal solution of the model is the spanning tree with the minimumcost among all spanning trees.This method can be used to optimize the seabed pipe network system andgive a minimum cost plan for the development of offshore marginal oilfield groups.     

On dynamic coupling effects between a spar and its mooring lines

The responses of a spar constrained by slack mooring lines to steep ocean waves and tensions in the mooring lines are simulated using two different numerical schemes: a quasi-static approach (SMACOS) and a coupled dynamic approach (COUPLE). The two approaches are the same in computing wave loads on the structure. Their difference is in modeling dynamic forces of mooring lines; that is the dynamic forces are included in the computation of COUPLE but neglected in SMACOS. The numerical simulation is examined against the laboratory measurements of the JIP Spar in a water depth of 318 m. The dynamic coupling effects between the JIP Spar and its mooring lines in different water depths (318, 618 and 1018 m) are investigated by the comparison of numerical simulations obtained using the quasi-static and coupled dynamic approaches. It is found that the damping of mooring lines reduces the slow-drift surge and pitch of the Spar, especially in deep water. The reduction in the amplitude of slow-drift surge can reach about 10% in a water depth of 1018 m. The tension in mooring lines may greatly increase in the wave frequency range when dynamic forces in mooring lines are considered. The mooring-line tension in the wave frequency range predicted by the coupled dynamic approach can be eight times as great as the corresponding prediction by the quasi-static approach in a water depth of 1018 m. This finding may have important implications for the estimation of the fatigue strength and life span of the mooring lines deployed in deep water oceans.     

海上矿石运输最优船队的组建

针对海上矿石运输，介绍了一种完成定量任务并能使投资费用最少为目标的最优船队组建方法，同时对易变参数进行了灵敏度分析，使决策更加科学化     

中国对虾配合饲料限制性营养成分分析

以最常用的18种原料为对象,用线性规划的方法对华东沿海中国对虾人工饲料配制过程中的限制营养成分进行了分析。结果表明,粗脂肪、粗灰分、磷、精氨酸、赖氨酸是限制性营养成分,粗纤维和蛋氨酸在以植物性蛋白质为主的配方中是限制性营养成分。因此,在中国对虾人工饵料配方设计中,应注意选用脱脂原料,增加矿物质添加剂中磷的含量以及采用富含精氨酸和赖氨酸的原料。     

定位卫星轨道监视系统研究

与卫星测控中心的卫星轨道参数相比,地球同步卫星定位系统中轨道计算子系统所计算出的卫星星历数据具有实时性强、精度高的特点,如何有效利用该星历数据来分析卫星轨道运行情况是该领域的一个热门研究课题。在介绍卫星轨道测定法的基础上,提出了以卫星速度变化率和卫星星下点为主要监视内容的卫星轨道监视系统,通过系统的试运行结果可以看出,该系统能够有效地监视卫星的瞬时和长期运行情况,为卫星的在轨运行管理提供了一种直观、形象的监视方法。     

Excel VBA在测量数据处理中的应用

Excel是office办公软件中的一个组件,而VBA是office应用程序共享的一种通用的自动化语言,可以使常用的office应用程序自动化,并可以创建自定义的解决方案。本文对Excel2003的数据处理功能进行分析,论述通过Excel2003的VBA编辑器创建"宏"功能实现测量数据处理的优点;并结合道路工程中桩坐标及其放样数据计算实例,给出了通过VBA编程进行测量数据处理的方法。