无棱镜技术在电厂施工土方量测量中的应用

随着全站仪在测量中的广泛应用,测量的精度有了很大的提高.特别是无棱镜技术的发展,改变了以往的测量手段和方法,提高了工作的效率.土方量测量是施工过程中不可避免的,为此本文介绍无棱镜测量技术在洛河电厂施工过程中测量土方量的应用情况,通过对比实验,我们对无棱镜测量技术工作效率和成果精度以及适用条件进行分析.     

利用主成分分析改善土地利用变化的遥感监测精度——以珠江三角洲城市用地扩张为例

近年来,珠江三角洲由于经济的快速发展,城市用地急剧增加,利用多时相的遥感图,可以定量地监测这种城市化的现象。但理,由一般的遥感动态监测方法所得的结果往往夸大变化的程度,以及获得一些不合理的结论．该文提出主成分分析的方法来改善遥感动态监测的精度。将该方法应用应用于珠江三角洲发展最快的东莞市,获得了较满意的结果。     

Quick Bird遥感影像的几何校正

以高分辨率的Quick Bird卫星数据为对象,经影像信息融合,使处理后的图像分辨率提高且接近真彩色,具有良好的判识效果;选择若干个GPS地面控制点作为参考点,以遥感图像处理软件ER Mapper6.2为平台,对图像进行二次多项式几何精校正,纠正后的图像点位误差在lm左右,说明纠正后的图像具有较高的几何精度.     

Effects of laser beam alignment tolerance on lidar accuracy

One of the major lidar error sources not yet analyzed in the literature is the tolerance of the laser beam alignment with respect to the scanning mirror. In this paper, the problem of quantifying these errors is solved for rotating polygon mirror type lidar systems. An arbitrary deviation of the beam from its design direction–the vector of beam misalignment–can be described by two independent parameters. We choose these as horizontal and vertical components of the misalignment vector in the body frame. Either component affects both, horizontal and vertical lidar accuracy. Horizontal lidar errors appear as scan line distortions—along and across track shifts, rotations and scaling. It is shown that the horizontal component of misalignment results in a scan line first being shifted across the track and then rotated around the vertical at the new center of the scan line. Resulting vertical lidar error, being a linear function of the scan angle, is similar to that produced by a roll bias. The vertical component of the beam misalignment causes scan line scaling and an along track shift. The corresponding vertical error is quadratic with respect to the scan angle. The magnitude of these effects is significant even at tight alignment tolerances and cannot be realistically accounted for in the conventional calibration model, which includes only range, attitude and GPS biases. Therefore, in order to attain better accuracy, this model must be expanded to include the beam misalignment parameters as well. Addition of new parameters into the model raises a question of whether they can be reliably solved for. To give a positive answer to this question, a calibration method must utilize not only ground control information, which is typically very limited, but also the relative accuracy information from the overlapping flight lines.     

河南郑州台数字化DSQ水管倾斜仪观测精度的评定

选取了河南郑州台数字化 DSQ型水管倾斜仪观测资料较好的 2 0 0 1年 10月 1日至 12月 31日的数据进行了分析处理 ,对该仪器的观测精度进行了评定。经计算 ,其北南向和东西向日飘移分别为 0 .0 0 0 7s和 0 .0 0 2 6 s,M2 的振幅因子为 0 .714 9和 0 .6 4 14 ,振幅因子中误差为 0 .0 0 5 5和0 .0 0 4 4。     

电子水准仪DINI20和DL102试验与精度分析

以ＺＥＩＳＳ ＤＩＮＩ ２０和ＴＯＰＣＯＮ ＤＬ １０２型仪器为例，介绍电子水准仪和编码标尺的构造与基本工作原理，阐述对上述电子水准仪的补偿器，编码标尺倾斜与遮挡等性能的检验结果分析，由建立的试验场实测精度得出，上述仪器一般机用于三、四等水信测量，在一定条件下也可用于二等水准则量，并指出测量中应注意的事项。     

Assessing land use/cover changes: a nationwide multidate spatial database for Mexico

A nationwide multidate GIS database was generated in order to carry out the quantification and spatial characterization of land use/cover changes (LUCC) in Mexico. Existing cartography on land use/cover at a 1:250,000 scale was revised to select compatible inputs regarding the scale, the classification scheme and the mapping method. Digital maps from three different dates (the late 1970s, 1993 and 2000) were revised, evaluated, corrected and integrated into a GIS database. In order to improve the reliability of the database, an attempt was made to assess the accuracy of the digitalisation procedure and to detect and correct unlikely changes due to thematic errors in the maps. Digital maps were overlaid in order to generate LUCC maps, transition matrices and to calculate rates of conversion. Based upon this database, rates of deforestation between 1976 and 2000 were evaluated as 0.25 and 0.76% per year for temperate and tropical forests, respectively.     

利用卫星遥感资料反演感热和潜热通量的研究综述

区域平均感热和潜热通量是气象、水文、生态模式中的关键物理因子，卫星遥感反演为观测区域平均感热和潜热通量提供了可能。对利用卫星遥感资料反演地气通量的方法进行了总结和评述。首先描述了现在常用的反演方法，分析了方法中的各种假定对反演结果的影响，并对不同的模式反演结果进行了比较。还指出了评价卫星反演通量的精度时需要注意的问题。最后对该领域内现存的问题与发展方向进行探讨。     

速度差对井间走时层析成像质量的影响及其改进方法

在井间地震初至走时层析成像中,随着相邻地质体速度差的增大,使得射线分布不均匀,以及网格剖分不合适,导致层析成像结果不理想.物理和数值模型的井间走时层析成像表明：当速度差超过300%时,层析结果畸变较大;在300%～150%之间时,层析结果较好;低于150%时,层析结果好.在此基础上,提出了井间多尺度初至走时层析成像方法,即对同一模型采用多种网格剖分来同时进行层析成像,以获得研究区域的速度图像.数学和物理模型的井间多尺度走时层析结果表明：该方法很好地兼顾了层析成像的分辨率和精度,极大地改善了井间地震层析成像的质量.即使速度差超过30%,其多尺度的层析结果仍然较好.因此,这种方法具有实际应用的潜力.