连续台风时期香港区域的水汽变化分析

利用香港卫星定位参考站网GNSS观测数据,提取强热带风暴"塔拉斯"与热带风暴"洛克"影响期间各测站天顶方向对流层延迟,反演香港区域大气可降水量;根据香港区域49个天文台气象站提供的实测降雨量数据,分析大气可降水量与实际降雨量的相关性,以及两次台风对香港区域水汽时空分布的不同影响。结果表明,大气可降水量在台风影响前期均上升,在大量降雨后回落,但在连续台风的间歇期间,仍高于台风来临前的水平;水汽累积是大量降雨的前提条件,当水汽累积量相近时,水汽累积时长与累积降雨量呈正相关;台风期间大气可降水量值超过65 mm的区域面积与台风等级相关,台风路径对局部水汽分布有一定的影响。     

新疆博斯腾湖沉积岩心的~(210)Pb、~(228)Th、~(239,240)Pu和~3H的分布及意义

作者测定了博斯腾湖沉积岩心~(210)Pb、~(228)Th和核试验释放核素~(239,240)Pu、~3H的分布,并据~(210)Pb、~(228)Th、~(239,240)Pu的结果估算湖泊的沉积速率,分别为0.31cm/a,0.26cm/a和0.33cm/a。它表明该湖泊近百年来沉积环境十分稳定。沉积物岩心极好地保存了人类大气核试验的历史记录。~(239,240)Pu分布在1963±2出现峰值,与60年代核试验高峰期相当吻合。沉积物孔隙水~3H分布的峰值出现在1969年,与湖水的混合过程有关。     

上海天文台激光测距站的时频系统

本叙述了上海天台人卫激光测距站的时频系统。随着测距精度的提高，时频系统也要不断地加以改进，包括频率标准和时间同步技术。     

用C#.Net实现软件系统的动态更新

为了便于大型软件系统的后续开发和用户软件系统的升级，介绍了软件系统在Internet/Intranet上更新功能或数据的原理和方法，并用C#．Net进行了编程实现。     

MATLAB在运用系统建模处理南海气象数据过程中应用

介绍了MATLAB语言特点和系统建模方法的基本理论.根据南海气象数据的实际建模处理过程,给出了建模的详细步骤及其MATLAB实现过程以及MATLABTM的主要实现程序.试验讨论和结果表明利用MATLAB语言可以方便地对南海气象数据用系统建模方法进行建模和处理,MATLAB在运用系统建模法处理南海气象数据方面具有明显的优越性.     

平凉隐伏岩溶水环境同位素研究

地下水资源可持续利用的一个急待解决的重要问题,是对地下水补给和更新能力的评价.利用环境同位素技术研究地下水的补给和可更新性是当前较为新颖的方法之一.在西北干旱、半干旱的隐伏岩溶地区,地下水埋藏条件复杂,常规的地质勘探方法所能提供的水文地质信息有限,环境同位素方法在研究地下水的补给及可更新能力方面发挥了优势,可对传统方法进行补充和验证.其结果表明,研究区隐伏岩溶水形成较早,且有大量现代水的混入,平均混入量为54%.说明区内隐伏岩溶水的补给和更新能力较好.环境同位素分析结果还显示,大岔河隐伏岩溶水为一相对独立、半开放的水文地质单元,其补给来源部分为流域内大气降水、地表水的补给,部分为东南部三道沟岩溶地下水的补给;根据环境同位素EPM模型计算,地下水的滞留时间为36 a.地下水储存量为1.314×108 m3; 储水系数为7.29×10-3.这一结果与传统勘探方法的计算结果基本吻合,说明环境同位素方法的实用性.     

第22周以来的太阳黑子活动区

本文对第22周以来产生M级以上(包括M级)的X射线耀斑的太阳黑子活动区进行了统计分析,得到如下结果:(1)黑子活动区在南北半球上分布是不均匀的。具体表现是:南半球出现的黑子活动区多于北半球出现的。南半球活动较强的黑子群主要集中在80°,160°,200°和340°经度附近;北半球活动较强的黑子群主要集中在240°-280°和340°-360°经度带。(2)黑子群的面积(S_p)越大越易产生X级的X射线耀斑。对黑子群面积S_p在大于1000,500-1000和小于500单位时,它们产生X级的X射线耀斑的比率分别约为41％,33％和9％。     

The Geologic Time Scale and the Italian stratigraphic record

The construction of the Geologic Time Scale (GTS) is a titanic scientific challenge that has been under way for two centuries and will require much dedicated effort in the future. Italy preserves a paramount stratigraphic record of Mesozoic and Cenozoic marine sediments that have been significant in the development of the modern GTS. The Italian stratigraphic record has been histori-cally important in introducing and defining the standard Chronostratigraphic Units (CUs) of the Neogene and Quaternary. Pelagic successions from Northern Apen-nines and Southern Alps have been used in the seventies for integrating the late Cretaceous-Paleogene Geomag-netic Polarity Time Scale (GPTS) with planktonic microfossil biostratieraohv and standard CUs. This was a major contribution to the construction of a new gener-ation of GTS based on integrated magnetobiochronol-ogy. The middle Miocene to early Pleistocene marinerecord from Sicily and southern Italy has been funda-mental for establishing the recently developed Astro-nomical Time Scale (ATS). In prospect, there are many potentials still to be exploited in the Italian marine stratigraphic record for implementing the GTS by defin-ing GSSPs of various CUs, improving magneto-biochronology and extending downwards the ATS.     

SIMULATION AND PREDICTION OF DEBRIS FLOW USING ARTIFICIAL NEURAL NETWORK

Debris flow is one of the most destructive phenomena of natural hazards. Recently, major natural haz-ard, claiming human lives and assets, is due to debris flow in the world. Several practical methods for forecasting de-bris flow have been proposed, however, the accuracy of these methods is not high enough for practical use because of the stochastic and non-linear characteristics of debris flow. Artificial neural network has proven to be feasible and use-fill in developing models for nonlinear systems. On the other hand, predicting the future behavior based on a time se-ries of collected historical data is also an important tool in many scientific applications. In this study we present a three-layer feed-forward neural network model to forecast surge of debris flow according to the time series data collect-ed in the Jiangjia Ravine, situated in north part of Yunnan Province of China. The simulation and prediction of debris flow using the proposed approach shows this model is feasible, however, further studies are needed.     

嵌入式时间间隔计数器的研制

介绍了一种新研制的嵌入式时间间隔计数器，它可作为一种功能模块用于用户的设备或时统中，实现高精度时间测量。从基本原理、硬、软件和功能等不同角度对计数器进行了较为详细的讨论。在该计数器的研制过程中还开发了用来调试计数器和供计数器用户使用的计算机应用软件，对此也作了简要介绍。最后，给出了计数器的设计指标和一些实测数据。