缝洞型储层模型AVO属性特征分析

塔里木盆地是我国最大的含油气盆地,拥有巨大的油气资源潜力。但塔中地区奥陶系岩溶缝洞型储层埋藏深、类型复杂、储层非均质性强,所表现出的岩石地球物理特性不清楚。为了分析典型缝洞型储层模型含不同流体情形下的AVO特征,建立了过玉北1井的缝洞型储层地震地质模型,模型的3个储层段对应的孔隙度分别为10%,6%和8%,分别对应Ⅰ类储层、Ⅲ类储层和Ⅱ类储层,设计了3个储层段都充填气和3个储层段分别充填气、油、水3种不同流体时的2个模型,基于正演模拟共成像点道集记录(CMP),提取截距、梯度、纵横波反射系数及流体因子,采用AVO属性交汇分析方法,寻找油气识别的最佳属性组合,为叠前反演解释提供理论基础。     

基于水平承载桩土抗力计算的挡墙土压力计算模型

为了考虑挡墙位移与深度对土压力大小及分布规律的影响,使计算结果更加接近实际情况,根据水平承载桩土抗力计算方法建立了可以考虑位移及深度非线性影响的挡墙土压力计算模型,并对其主要参数水平地基系数KN的取值进行了分析。通过对计算模型的试验验证显示:该模型能比较准确地计算土压力的大小,并且能够较好地反映土压力随深度的分布规律。表明该方法简便、实用,可为挡墙设计土压力的计算提供一定参考。     

Theoretical Analysis of A Buoyant Jet Interacting with Small Amplitude Waves

A new theoretical solution is presented here for the dynamic characteristics of a buoyant jet due to opposing small amplitude waves.The conservation equations of mass,tangential momentum and vertical momentum are solved by the integral method which encompasses the Gaussian profiles of velocity and density.The action of waves is incorporated into the equations of motion as an external force and a new exact solution is obtained to predict the trajectory,velocity distribution and boundary thickness of the buoyant jet over an arbitrary lateral cross section.It is found that the velocity along the centerline is inversely proportional to the ratio of the momentum of the wave to the buoyant jet.The averaged boundary width varies with the fluctuation of the boundary width,the distance from the orifice and the velocity correction function.Owing to the motion d waves,the fluctuation of the boundary width is proportional to the wave steepness.     

Numerical Simulation of Water Level Under Interaction Between Runoff and Estuarine Dynamics in Tidal Reach of the Yangtze River

The Yangtze Estuary, the largest estuary in China, is under an obvious interaction between runoff and astronomical tide. The research on the interaction is very important for the exploitation and utilization of water resources in this area. A horizontal 2D hydrodynamic numerical model is established and verified in the present study with the modeling range from Datong to the Yangtze Estuary. Based on the comparison of high water levels under the interaction between different runoff and estuarine dynamics, s...     

Study on General Performance of Jack-up Under Elevated Condition

Method of checking for jack-up elevated performance including leg structure strength, fixation system or jacking system bearing capacity, pre-load requirements, spud can bearing capacity and overturning stability is suggested in this paper. As an example, a jack-up with truss legs is analyzed by finite element analysis method. This paper may be helpful to the rig owners, operators and designers.     

64排螺旋CT对胫骨平台隐匿性骨折的诊断及临床意义

目的:探讨64排螺旋CT对胫骨平台隐匿性骨折的诊断价值及临床意义。方法:收集2008年1月至2011年12月连续21例门急诊下肢外伤后普通X线平片表现为阴性及可疑骨折,64排螺旋CT检查确诊为胫骨平台骨折患者影像资料,并重新采用多层面重建(MPR);容积显示(VR)和最大灰度重建(MIP)等多种后处理技术进行回顾性分析。结果:MDCT3D共显示SchatzkerⅠ型10例;Ⅱd型4例;Ⅲ3例;Ⅳ型2例;Ⅳ型1例和Ⅴ型1例。结论:64排螺旋CT联合应用多种重建技术对胫骨平台隐匿性骨折的评价是可靠和准确的。可以准确评估21例胫骨平台骨折的部位、类型、程度及并发症等。明显提高了诊断准确性,避免了普通平片对胫骨平台隐匿性骨折的漏诊及误诊。可为临床采取及时有效的治疗提供更准确、更丰富的诊断信息。     

Long-term Geomechanical Observation in the Jeroným Mine

Geomechanical measurements have been carried out in the medieval Jeroným Mine since 2001. At first quarterly observation and later also continual monitoring by distributed measurement network were used. The network includes a number of different sensors that have been installed in selected places of underground spaces. There have not been any manifestations documenting dangerous changes of stability during the period of monitoring (2001–2015). The results of accomplished measurements from all convergence profiles confirm the total stability of all underground spaces. However, a number of places have been documented as potentially unstable. Measured values of selected parameters are presented in the paper, namely, movements along fractures, changes of stress tensor and fluctuations in the level of mine water table.     

Numerical Solution of Lock-Release Gravity Current with Viscous Self-Similar Regime

Lock-release gravity currents with a viscous self-similar regime are simulated by use of the renormalization group(RNG) k - ε model for Reynolds-stress closure. Besides the turbulent regime with initially a slumping phase of a conslant current front speed and later an inviseid self-similar phase of front speed decreasing as t^-1/3(where t is the time measured from release), the viseous self-similar regime is satisfactorily reproduced with front speed decreasing as t^-4/5,consistent with well known experimental observations.     

大型工业CT在机车关键部件无损检测中的应用

摇枕、侧架作为列车转向架的重要组成部分,对列车行驶安全起到至关重要的作用,各生产厂家亟须具有高穿透力的检测设备对其进行大批量的检测.本文介绍了应用于铁路机车关键部件无损检测的大型工业CT系统,论述了系统设计和扫描工作流程,并通过实例展示大型工业CT在摇枕、侧架等无损检测的应用情况.实际应用说明大型工业CT系统可对摇枕、侧架等关键部件的内部结构及内部的气孔、砂眼、夹杂物、缩孔、疏松、冷隔、裂纹等铸造缺陷进行快速有效检测,能够很好地满足该行业的需求.     

An Alternative Protocol for Single Zircon Dissolution with Application to (U‐Th‐Sm)/He Thermochronometry

Zircon (U‐Th‐Sm)/He (ZHe) thermochronometry is a powerful tool that has been widely used in geology to constrain the exhumation histories of orogens. In this study, we present an alternative protocol for dissolving zircon grains for determination of parent nuclides. This new alkali fusion procedure developed at the SARM (Service d'Analyse des Roches et des Minéraux) in Nancy, France, is fast (requiring only 2 d, including cleaning steps) and offers several advantages over conventional methods by avoiding: (i) use of HF pressure dissolution and (ii) complete removing of grains from the metal microvials. After dissolution, U, Th and Sm were measured using an ICP‐MS. We tested the new procedure on two different ZHe reference materials, the Fish Canyon Tuff and Buluk Tuff; these provided precision values for ZHe‐age estimations of 9 and 6% (1s), respectively. In addition, using this method, zircons from the Buluk Tuff are shown to be chemically more homogenous and more suitable for assessing the uncertainty of the entire integrated procedure.