Assessment of alternative adsorption models and global sensitivity analysis to characterize hexavalent chromium loss from soil to surface runoff

We investigate our ability to assess transfer of hexavalent chromium, Cr(VI), from the soil to surface runoff by considering the effect of coupling diverse adsorption models with a two‐layer solute transfer model. Our analyses are grounded on a set of two experiments associated with soils characterized by diverse particle size distributions. Our study is motivated by the observation that Cr(VI) is receiving much attention for the assessment of environmental risks due to its high solubility, mobility, and toxicological significance. Adsorption of Cr(VI) is considered to be at equilibrium in the mixing layer under our experimental conditions. Four adsorption models, that is, the Langmuir, Freundlich, Temkin, and linear models, constitute our set of alternative (competing) mathematical formulations. Experimental results reveal that the soil samples characterized by the finest grain sizes are associated with the highest release of Cr(VI) to runoff. We compare the relative abilities of the four models to interpret experimental results through maximum likelihood model calibration and four model identification criteria (i.e., the Akaike information criteria [AIC and AIC_C] and the Bayesian and Kashyap information criteria). Our study results enable us to rank the tested models on the basis of a set of posterior weights assigned to each of them. A classical variance‐based global sensitivity analysis is then performed to assess the relative importance of the uncertain parameters associated with each of the models considered, within subregions of the parameter space. In this context, the modelling strategy resulting from coupling the Langmuir isotherm with a two‐layer solute transfer model is then evaluated as the most skilful for the overall interpretation of both sets of experiments. Our results document that (a) the depth of the mixing layer is the most influential factor for all models tested, with the exception of the Freundlich isotherm, and (b) the total sensitivity of the adsorption parameters varies in time, with a trend to increase as time progresses for all of the models. These results suggest that adsorption has a significant effect on the uncertainty associated with the release of Cr(VI) from the soil to the surface runoff component.     

20颗依巴谷碳星的近红外测光

对20颗依巴谷(Hipparcos)卫星所观测的碳星作了近红外JHK测光，由近红外观测结果估算了其在K波段的热改正BCK和视热星等mbpl以及有效温度Te，结合依巴谷卫星所得视差，得到其中一些星的绝对热星等Mbol。     

Fast iterative solution of large undrained soil‐structure interaction problems

In view of rapid developments in iterative solvers, it is timely to re‐examine the merits of using mixed formulation for incompressible problems. This paper presents extensive numerical studies to compare the accuracy of undrained solutions resulting from the standard displacement formulation with a penalty term and the two‐field mixed formulation. The standard displacement and two‐field mixed formulations are solved using both direct and iterative approaches to assess if it is cost‐effective to achieve more accurate solutions. Numerical studies of a simple footing problem show that the mixed formulation is able to solve the incompressible problem ‘exactly’, does not create pressure and stress instabilities, and obviate the need for an ad hoc penalty number. In addition, for large‐scale problems where it is not possible to perform direct solutions entirely within available random access memory, it turns out that the larger system of equations from mixed formulation also can be solved much more efficiently than the smaller system of equations arising from standard formulation by using the symmetric quasi‐minimal residual (SQMR) method with the generalized Jacobi (GJ) preconditioner. Iterative solution by SQMR with GJ preconditioning also is more elegant, faster, and more accurate than the popular Uzawa method. Copyright © 2003 John Wiley & Sons, Ltd.     

内蒙阿右旗铁板井镍矿矿床特征及成因探讨

铁板井绦矿床赋存于辉橄岩体中,辉橄岩体具有全岩矿化的特点,岩体及镍矿体的形成经历了三种不同的成矿过程:首先是岩浆深源液态重力分异作用,而后发生岩浆深源熔离-贯入(成岩、成矿)作用,形成岩体和镍矿体,最后在岩浆期后热液作用的叠加下完成整个成矿过程.该矿床是典型的主要由岩浆熔离作用形成的岩浆矿床.     

某型短波电台的中频数字化设计

针对短波射频数字化对器件的要求较高,功耗较大,现在一般采用中频数字化技术.给出了某型短波电台的中频数字化设计方案,介绍了电台中频数字化部分的实现方法及基本原理.并介绍了本设计中使用的Inters公司生产的数字上变频器HSP50415,美国AD公司生产的数字接收信号处理芯片AD6620和TI公司TMS320VC5416芯片的结构、功能和特点,给出了它们在数字变频应用的硬件模块接口图.测试结果证明,通过在中频部分使用数字变频器提高了电台的收发性能,较模拟化中频有着成本低廉、功耗低、兼容性好和可扩展性好.     

地下水功能评价指标选取依据与原则的讨论

地下水功能评价是实现地下水可持续利用和有效保护生态及地质环境的重要基础,而评价的关键是指标的选取。本文在遵循主导性、可度量、可操作、覆盖面广和灵活性原则的基础上,考虑地下水功能的影响因素、表征特征,从地下水系统的驱动、状态和响应因子中筛选出地下水功能评价的指标,从而为地下水功能评价建立了一套行之有效的指标集。     

黄河内蒙古段冰凌形成机理及凌汛成因分析研究

本文着重分析研究黄河内蒙古段冰凌形成杌理、冰情演变及凌汛成因.文中系统分析了黄河内蒙古段的冰情演变过程的四个时期,即由冰晶形成至产生大量冰凌的成冰期;由凌块封冻至盖面冰层增至最厚的结冰期:冰层开始融化至解冻前的融冰期和解冻开河至冰凌消失的消冰期.分析研究了影响凌汛成因的热力、动力和河势三大作用因素.使河水成冰又由冰融化成水的热量交换作用的因素,包括太阳辐射热、水温、气温、风、降水量、空气中的湿度:水位的抬升以至流速的变化等水流作用,均为动力因素;河道的特性影响为河势因素,通过分析研究,便于指导防凌实践,使防凌工作更加科学合理.     

A Computational Model for Velocity Separation in Shallow Sea

Based on the hydrodynamical feature and the theoretical velocity profiles of tidal flow and vvind-induced flow in shal-low sea, a computational model is established for the first time, which can separate observed velocity into tidal velocity and wind-induced velocity by use of the least square method. With the model, not only the surface velocities of tidal flow and vvind-induced flow are obtained, but also the bed roughness height is determined and the wind velocity above the wa-ter surface is estimated. For verification of the model, the observed velocity in the Yellow River Estuary and the laborato-ry test is separated, then it is applied to the Yangtze River Estuary. All the results are satisfactory. The research results show that the model is simple in method, feasible in process and reasonable in result. The model is a valid approach to analysis and computation of field dala, and can be applied to separate the observed velocity in shallow sea; at the same time, reasonable boundary conditions of th     

紫外线照射剂量对九孔鲍胚胎及幼虫的影响

采用不同的紫外线照射剂量的海水诱导九孔鲍产卵,观察其对卵子的受精率、畸形率和孵化率的影响.紫外线照射剂量的配制方法是:用紫外线照射过的最大剂量的海水与新鲜海水混合配制出各种剂量的海水.实验把雌亲鲍分成7组,每组20只,分别用紫外线照射剂量为0(对照组)、450、600、750、900、1 050和1 200mW.h/dm3的海水进行刺激产卵.试验重复3次.结果表明,紫外线照射剂量在1 200mW.h/dm3以内,对卵子的受精率影响不大;紫外线照射剂量在750mW.h/dm3以内,对卵子的畸形率影响不大,但在900~1 200mW.h/dm3,对卵子的畸形率影响很大;紫外线照射剂量在600mW.h/dm3以内,对卵子的孵化率没有什么影响,但在750~1 200mW.h/dm3,对卵子的孵化率影响很大.综合考虑卵子的受精率、畸形率和孵化率,九孔鲍催产的适宜的紫外线照射剂量应为450~750mW.h/dm3.     

全球海洋与大气界面的熵通量估算

给出并讨论了海洋系统中由于热量交换、物质交换以及外力做功引起的熵通量的表达式;同时,根据新近调整的全球海 气界面的气候平均资料,估计了全球海洋与大气界面气候年平均的熵通量(熵流),这一熵通量主要取决于海 气界面的热量和物质交换的空间不均匀性。计算结果显示,由热量交换分量引起的熵通量对海洋系统的总熵通量起到主要的贡献作用,其值约为-555.6mW·(m2·K)-1;由海表风应力做功引起的熵通量相对较小,约为-0.09mW·(m2·K)-1;由物质交换引起的熵通量最小,仅为-0.02mW·(m2·K)-1。总的来说,海洋系统从外界获得的总熵通量为-555.7mW·(m2·K)-1,这也就意味着在气候平均定态下,海洋系统内部的熵产生在量值上等于系统的熵交换,即为555.7mW·(m2·K)-1。海洋系统的负熵流与其内部的各种不可逆过程引起的熵产生取得平衡,确保了全球海洋系统处于非平衡热力学定态,并维持着海洋系统中各种尺度的时 空有序现象的消长过程。