Sublittoral seaweed communities on natural and artificial substrata in a high-latitude coral community in South Africa

Coral mortality may result in macroalgal proliferation or a phase shift into an alga-dominated state. Subtidal, high-latitude western Indian Ocean coral communities at Sodwana Bay on the KwaZulu-Natal coast, South Africa, have experienced some mortality because of warm-water anomalies, storms and other causes, but the response of the macroalgae is unknown. We investigated the abundance and diversity of benthic algae on different hard natural substrata (dead digitate, brain and plate corals and beach rock) on Two-Mile Reef, Sodwana Bay. We also compared algal communities colonising ceramic, marble and pretreated ceramic tiles placed on the reef for six months. We identified 95 algae (14 Chlorophyta, 11 Phaeophyceae, 69 Rhodophyta and one cyanobacterium). Assemblages on natural and artificial substrata were dominated by the brown alga Lobophora variegata (Lamouroux) Womersley ex Oliveira and non-geniculate corallines (Rhodophyta, Corallinaceae). Cluster and ordination analyses revealed that the algae showed no affinity for particular substrata, whether natural or artificial. Algal cover was occasionally higher on rougher tiles and crustose corallines were significantly more abundant on marble than ceramic tiles. Two-Mile Reef had 23.1% dead and 48.4% live scleractinian coral cover, where dead corals were colonised indiscriminately by many small algal species, but there was no evidence of algal proliferation. The results provide a baseline for monitoring this high-latitude reef system.     

Geological and seismological evidence of increased explosivity during the 1986 eruptions of Pavlof volcano,Alaska

We present results of study of the best-documented eruptions of Pavlof volcano in historic time. The 1986 eruptions were mostly Strombolian in character; a strong initial phase may have been Vulcanian. The 1986 activity erupted at least 8×10⁶ m³ of feldspar-phyric basaltic andesite lava (SiO₂=53–54%), and a comparable volume of wind-borne tephra. During the course of the eruption, 5300 explosion earthquakes occurred, the largest of which was equivalent to an M _L =2.5 earthquake. Volcanic tremor was recorded for 2600 hours, and the strongest tremor was recorded out to a distance of 160 km and had an amplitude of at least 54 cm² reduced displacement. The 1986 eruptions modified the structure of the vent area for the first time in over two decades. A possible pyroclastic flow was observed on 19 June 1986, the first time such a phenomenon has been observed at the volcano. Overall, the 1986 eruptions were the strongest and longest duration eruptions in historic time, and changed a temporal pattern of activity that had persisted from 1973–1984.     

Crustal structure beneath exposed accreted terranes of Southern Alaska

Summary. The crustal structure beneath the exposed terranes of southern Alaska has been explored using coincident seismic refraction and reflection profiling. A wide-angle reflector at 8–9 km depth, at the base of an inferred low-velocity zone, underlies the Peninsular and Chugach terranes, appears to truncate their boundary, and may represent a horizontal decollement beneath the terranes. The crust beneath the Chugach terrane is characterized by a series of north-dipping paired layers having low and high velocities that may represent subducted slices of oceanic crust and mantle. This layered series may continue northward under the Peninsular terrane. Earthquake locations in the Wrangell Benioff zone indicate that at least the upper two low-high velocity layer pairs are tectonically inactive and that they appear to have been accreted to the base of the continental crust. The refraction data suggest that the Contact fault between two similar terranes, the Chugach and Prince William terranes, is a deeply penetrating feature that separates lower crust (deeper than 10 km) with paired dipping reflectors, from crust without such reflectors.     

Contact Partial Melting of Granitic Country Rock, Melt Segregation, and Re-injection as Dikes into Ferrar Dolerite Sills, McMurdo Dry Valleys, Antarctica

Numerous, interconnected, granitic dikes (<30 cm in widthand hundeds of meters in length) cut Ferrar dolerite sills ofthe McMurdo Dry Valleys, Antarctica. The source of the graniticdikes is partial melting of granitic country rock, which tookplace in the crust at a depth of about 2–3 km adjacentto contacts with dolerite sills. Sustained flow of doleriticmagma through the sill generated a partial melting front thatpropagated into the granitic country rock. Granitic partialmelts segregated and collected at the contact in a melt-rich,nearly crystal-free reservoir adjacent to the initial doleritechilled margin. This dolerite chilled margin was subsequentlyfractured open in the fashion of a trapdoor by the graniticmelt, evacuating the reservoir to form an extensive complexof granitic dikes within the dolerite sills. At the time ofdike injection the dolerite was nearly solidified. Unusuallycomplete exposures allow the full physical and chemical processesof partial melting, segregation, and dike formation to be examinedin great detail. The compositions of the granitic dikes andthe textures of partially melted granitic wall rock suggestthat partial melting was characterized by disequilibrium mineraldissolution of dominantly quartz and alkali feldspar ratherthan by equilibrium melting. It is also unlikely that meltingoccurred under water-saturated conditions. The protolith granitecontains only 7 vol.% biotite and estimated contact temperaturesof 900–950°C suggest that melting was possible ina dry system. Granite partial melting, under closed conditions,extended tens of meters away from the dolerite sill, yet meltsegregation occurred only over less than one-half a meter fromthe dolerite chilled margin where the degree of partial meltingwas of the order of 50 vol.%. This segregation distance is consistentwith calculated length scales expected in a compaction-drivenprocess. We suggest that the driving force for compaction wasdifferential stress generated by a combination of volume expansionas a result of granite partial melting, contraction during doleritesolidification, and relaxation of the overpressure driving doleriteemplacement. On a purely chemical basis, the extent of meltsegregation necessary under fractional and batch melting tomatch the Rb concentrations between melt and parent rock isa maximum of 48 and 83 vol.% melt, respectively. KEY WORDS: Antarctica; dike injection; disequilibrium; granite partial melting; silicic melt segregation     

Large-scale Mechanical Redistribution of Orthopyroxene and Plagioclase in the Basement Sill, Ferrar Dolerites, McMurdo Dry Valleys, Antarctica: Petrological, Mineral-chemical and Field Evidence for Channelized Movement of Crystals and Melt

The Jurassic Ferrar dolerite sills of the McMurdo Dry Valleys,Antarctica represent the plumbing system for flood basalt eruptionsassociated with the breakup of Gondwana. Among the Ferrar sills,the 350–450 m thick cumulate-textured Basement Sill isdifferentiated into a Lower Marginal Zone (LMZ) gabbronorite,a thick Lower Zone (LZ) orthopyroxene–plagioclase orthocumulatepyroxenite, a strongly layered mela- to leuco-gabbronorite MiddleZone (MZ), a thick Upper Zone (UZ) gabbronorite with ferrogabbroicpods, and an Upper Marginal Zone (UMZ) gabbronorite. Texturesand mineral compositions in the LZ pyroxenite and MZ–UZgabbronorites are nearly identical, the main distinction beingthe greater relative proportion of plagioclase in the MZ–UZgabbronorites, and of pigeonite in the UZ. Most orthopyroxenein the LZ, MZ and UZ occurs as sub-euhedral, normally zonedprimocrysts, commonly with rounded plagioclase inclusions. Plagioclaseis usually sub-euhedral and normally zoned, but can containsodic cores interpreted to be xenocrystic. Orthopyroxene andfeldspar compositions thoughout the sill are generally fairlyuniform, and resemble the compositions of micro-phenocrystsin the chilled margins. We infer that the sill was filled bya c. 1250°C slurry of orthopyroxene + plagioclase phenocrystsor primocrysts that subsequently unmixed in response to buoyancyforces. The LZ websterite contains numerous anorthosite to gabbronoriteschlieren, veins and pipes (< 2 m diameter), which we interpretas fossil segregation channels. Textures and mineral compositionsin these felsic channels are very similar both to UZ and MZgabbronorites, and to the groundmass separating accumulatedorthopyroxene primocrysts in the LZ and MZ. We infer that plagioclase-charged,hydrous pore melt from the pyroxenite may have segregated, pooledand ascended through these conduits to feed growth of the UZgabbronorite. Detailed mapping shows that the pipes are separatedby about 15 m on average. Calculations suggest that this numberdensity of conduits could have drained the LZ cumulates of theirinterstitial melt + plagioclase in about 8 days. Sequences (eachc. 5–10 m thick) of layered leuco-gabbronorite in theMZ could represent intra-cumulate sills that formed from plagioclase-richslurries ascending in segregation channels. Fe–Ti-richpyroxenitic veins and pods (some pegmatitic) and an unusualcoarse-grained plagioclase facies occur at the contacts betweenmassive leuco-gabbronorite layers in the MZ. Discordant ferro-pegmatitepods and dykes occur throughout the UZ. We interpret these Fe-richpegmatoidal rocks as evolved residual melts expelled from thecompacting gabbronoritic cumulates of the MZ and UZ. KEY WORDS: Ferrar; cumulates; differentiation; Antarctica; layering     

辉钼矿Re-Os同位素定年方法的改进与应用

公认的Re-Os同位素定年代表物辉钼矿,目前已在金属硫化物矿床年代学研究领域获得了广泛的应用。本研究采用浓HNO₃分解辉钼矿样品,大大地简化了Re和Os的化学制备过程,并根据辉钼矿中正常Os含量水平相对放射成因¹⁸⁷Os可以忽略的特点,以正常Os标准为稀释剂,实现了仪器测量过程中Os同位素质量分馏的在线校正,改善了分析数据的质量。该方法经辉钼矿国家标准物质进行验证,获得了满意的Re、Os含量及Re-Os年龄数据,并且在南岭地区与连阳复式岩体相关的姓坪夕卡岩型钼矿床成矿年龄研究中获得了成功应用。在实际应用中,为了获得有意义的能反映真实地质事件的年龄数据,辉钼矿样品不仅要有足够的取样量,而且还要保证粒度细、混合均匀。     

Using an unbaited stationary video system to investigate the behaviour and interactions of bull sharks Carcharhinus leucas under an aquaculture farm

Bull sharks Carcharhinus leucas are common along the coast of Reunion Island (South-West Indian Ocean) and were suspected to aggregate in the vicinity of an aquaculture farm in Saint-Paul Bay on the west coast. In order to understand the behaviour and interaction of bull sharks near aquaculture cages at Saint-Paul Bay, we deployed an experimental unbaited stationary video camera. From 175 hours of recording during daylight hours from March to April 2012, eight individual female bull sharks (seven adults and one immature) were identified based on their natural markings. These sharks were resighted between 3 and 45 times. Residency analysis revealed site attachment under the aquaculture cages for at least three individuals over the course of the study. Recorded behaviours included intraspecific social interactions such as synchronised swimming. Social interactions and relatively strong paired associations for two pairs of females suggest some level of sociality among bull sharks around Reunion Island. Overall, our results demonstrate the utility of unbaited video systems to monitor the behaviour of adult coastal sharks.     

Thinking globally and siting locally – renewable energy and biodiversity in a rapidly warming world

Increasing greenhouse gas emissions are projected to raise global average surface temperatures by 3?–4 °C within this century, dramatically increasing the extinction risk for terrestrial and freshwater species and severely disrupting ecosystems across the globe. Limiting the magnitude of warming and its devastating impacts on biodiversity will require deep emissions reductions that include the rapid, large-scale deployment of low-carbon renewable energy. Concerns about potential adverse impacts to species and ecosystems from the expansion of renewable energy development will play an important role in determining the pace and scale of emissions reductions and hence, the impact of climate change on global biodiversity. Efforts are underway to reduce uncertainty regarding wildlife impacts from renewable energy development, but such uncertainty cannot be eliminated. We argue the need to accept some and perhaps substantial risk of impacts to wildlife from renewable energy development in order to limit the far greater risks to biodiversity loss owing to climate change. We propose a path forward for better reconciling expedited renewable energy development with wildlife conservation in a warming world.     

Laboratory soil piping and internal erosion experiments: evaluation of a soil piping model for low‐compacted soils

Mechanistic models have been proposed for soil piping and internal erosion on well‐compacted levees and dams, but limited research has evaluated these models in less compacted (more erodible) soils typical of hillslopes and streambanks. This study utilized a soil box (50 cm long, 50 cm wide and 20 cm tall) to conduct constant‐head, soil pipe and internal erosion experiments for two soils (clay loam from Dry Creek and sandy loam from Cow Creek streambanks) packed at uniform bulk densities. Initial gravimetric moisture contents prior to packing were 10, 12 and 14% for Dry Creek soil and 8, 12, and 14% for Cow Creek soil. A 1‐cm diameter rod was placed horizontally along the length of the soil bed during packing and carefully removed after packing to create a continuous soil pipe. A constant head was maintained at the inflow end. Flow rates and sediment concentrations were measured from the pipe outlet. Replicate submerged jet erosion tests (JETs) were conducted to derive erodibility parameters for repacked samples at the same moisture contents. Flow rates from the box experiments were used to calibrate the mechanistic model. The influence of the initial moisture content was apparent, with some pipes (8% moisture content) expanding so fast that limited data was collected. The mechanistic model was able to estimate equivalent flow rates to those observed in the experiments, but had difficulty matching observed sediment concentrations when the pipes rapidly expanded. The JETs predicted similar erodibility coefficients compared to the mechanistic model for the more erodible cases but not for the less erodible cases (14% moisture content). Improved models are needed that better define the changing soil pipe cross‐section during supply‐ and transport‐limited internal erosion, especially for piping through lower compacted (more erodible) soils as opposed to more well‐compacted soils resulting from constructing levees and dams. Copyright © 2013 John Wiley & Sons, Ltd.     

Consequences of crystal shape and fabric on anisotropic permeability in magmatic mush

Crystals that form an interconnected porous network can become preferentially oriented both prior to and during compaction of magmatic mush. This introduces anisotropy in the melt pore-space that can reduce permeability in the direction of compaction and in turn decrease melt flux and compaction rate. Using a number of grain-scale numerical models, the consequences of end-member magmatic fabrics on the directional dependence of permeability are tested over a range in melt fraction from 22 to 77%. As the crystal aspect ratio (i.e. ratio of long to short axis length) increases from 2 to 10, isotropic permeability decreases by a factor of 2 and 5 for randomly oriented prolate and oblate-shaped crystals, respectively, at a melt fraction of 22%. With a flattening fabric, permeability is reduced in the compaction direction no more than approximately a factor of 2 relative to the isotropic permeability at the same melt fraction and crystal shape for both oblate and triaxial prisms. However, permeability is enhanced in directions orthogonal to the compaction direction. For example, permeability is enhanced up to a factor of 11 relative to the isotropic permeability at a melt fraction of 22% for oblate prisms with a ratio of the long to short axis length of 10. Anisotropy in permeability increases as the melt fraction decreases and the crystal aspect ratio increases. Ratios of the principal permeabilities are sufficiently large based on the realistic crystal shapes tested here to warrant including anisotropic permeability into macroscale melt segregation models including those for compaction.