Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

Multistep matched-field inversion for broad-band data from ASIAEX2001

This paper discusses the results of geoacoustic inversion carried out using explosive charge data from the Asian Seas International Acoustic Experiment (ASIAEX) East China Sea (ECS) Experiment. A multifrequency incoherent matched-field inversion processor and a genetic algorithm (GA) are used for the inversion. A multistep matched field inversion approach is presented, which makes use of the varying sensitivities of wave fields at various frequencies to reduce the inversion problem into a sequence of smaller inversions with fewer unknowns to estimate at each stage. Different parameters are estimated using data at different frequencies according to their sensitivities. Inversion results for different areas in the ECS region are summarized and compared with core data.     

桩静载荷试验快速法与慢速法对比研究

通过对54根管桩静载荷试验快速法与慢速法对比试验研究,找出了在各级荷载作用下,快速法与慢速法沉降差异规律及快速法与慢速法分别得出的极限承载力差异规律;得出了将快速法静载试验下的沉降及单桩极限承载力修正成慢速法静载试验的沉降及单桩极限承载力的公式;提出了适应天津地区管桩的快速法静载试验方法。     

饱和粉砂不稳定性的试验研究

通过对净砂和级配良好粉砂(含10 %粉土)进行一系列三轴固结不排水试验（CU）,研究了粉土、孔隙比和围压对饱和粉砂不稳定性的影响。试验结果表明,净砂与粉砂在不排水剪切条件下均会出现应变软化现象（即不稳定性）。同一围压下脆性指数(IB)随孔隙比增加,但不稳定线的应力比随孔隙比增加而减小。引用等效粒间孔隙比(ege)后,净砂和粉砂在ege-ln p?平面上拥有基本相同的临界状态线。在临界状态理论及等效粒间孔隙比的基础上,提出在同一修正状态参数(?ge)下净砂和级配良好粉砂有相似的不稳定性。     

Characterization of bacterial community structure in vestimentiferan tubeworm Ridgeia piscesae trophosomes

Terminal‐restriction fragment length polymorphisms (T‐RFLPs) were used to address the question whether there are multiple phylotypes of bacteria within the trophosome of the vestimentiferan tubeworm Ridgeia piscesae in addition to the known endosymbiont. Clone libraries were constructed to aid in the identification of the additional bacterial phylotypes. Individual R. piscesae specimens were collected from Juan de Fuca Ridge, Axial Caldera and Explorer Ridge, Magic Mountain. Clone library analyses revealed only one bacterial phylotype (expected R. piscesae endosymbiont) within the Explorer Ridge trophosomes. However, the Axial Caldera clone library revealed five operational taxonomic units (OTUs). Three of the resulting phylotypes detected (designated RAE) were putative thioautotrophic symbionts within the γ‐Proteobacteria which belonged to the anticipated endosymbiont group (RAE OTU 1), the Maorithyas hadalis symbiont II group (RAE OTU 3), and the Halothiobacillus group (RAE OTU 4). The remaining two phylotypes were most likely opportunistically derived. RAE OTU 5 was an α‐Proteobacterium within the Roseobacter group and RAE OTU 2 was within the Cytophaga–Flavobacterium–Bacteroidetes. T‐RFLP analyses revealed that all 15 trophosomes evaluated contained at least RAE OTUs 1 and 4. Five of the 15 trophosomes contained at least RAE OTUs 1, 3, and 4 and two of the trophosomes contained at least five RAE OTUs. Cluster analysis of the T‐RFLP data revealed three distinct clusters. The number of taxa within the trophosome may be an indication of the general health of the tubeworm. This study strongly suggests that we have discovered and identified more than one bacterial phylotype within the trophosome of vestimentiferan R. piscesae.     

海沧邻近海域表层沉积物中重矿物研究

对厦门海沧邻近海域表层沉积物中的重矿物(0．063～0．125mm粒级)进行了分析和研究，结果表明该粒级的重矿物共计49种，其优势和特征矿物为磁铁矿、赤铁矿、褐铁矿、绿帘石、铁铁矿、角闪石、锆石、红柱石等；重矿物的平均质量分数为9．56％；根据重矿物的分布和含量，并结合主要标志矿物的颗粒百分含量和分布特征，将该海域划分为5个矿物组合区，根据各区的矿物组合类型分析了该海域的物质来源及影响重矿物分布和组合的因素，进而探讨了九龙江河口湾和厦门西港海湾的沉积环境。     

Circulation and Brackish Water Dispersal in a Coastal Lagoon of Southwest Taiwan

Modest observations and numerical experiments were conducted to investigate circulation and brackish water dispersal in a coastal lagoon southwest of Taiwan. The Chi-Ku Lagoon, partially shielded from the sea by a string of sandbar barriers with two entrances among them, receives modest and episodic runoff from Chi-Ku Stream. Flood and ebb tidal streams entering and leaving the two entrances are found to converge and diverge in a flow stagnation area inside the lagoon. Under weak wind conditions, brackish water is preferentially retained in the flow stagnation area. Besides the observations, scenario runs using a three-dimensional numerical model also indicate strong modulation by monsoon winds. Both summer southwest monsoon and winter northeast monsoon reduce brackish water retention; the latter is found to be more effective. This revised version was published online in August 2006 with corrections to the Cover Date.     

用贝叶斯方法推算设计波高

采用长期概率预报提供波浪要素设计值是海洋工程中不可缺少的内容之一，文中介绍了一种基於贝叶斯原理的新计算方法，它较传统统计方法有明显的优越性，不仅可以通过补充新信息不断修正原有的估算结果，而且可以避免传统方法带来诸多不确定性，文中以北海中部百年一遇设计波高为例进行了计算。     

使用GAMIT进行高精度基线向量解算的方法与实践

GAM IT是国际上常用的GPS定位定轨软件,但由于其安装的平台(UN IX/LINUX)与我们通用的W indow s平台有所差异,使得GAM IT的入门较难。因此本文结合具体实例,介绍GAM IT的安装、基本操作以及应用GAM IT进行高精度基线向量解算,供初学者参考。     

基于RS与GIS技术的变更图斑自动识别方法研究

基于RS与GIS技术的土地利用变更图斑自动识别方法,即"以遥感正射影像图为基础,以地理信息和地物反射光谱为判别依据"的变更信息识别方法,能够尽量避免传统利用遥感影像分类技术进行地物变更识别存在的不足。本文通过对距离算法的改良,有效利用遥感数据的实时性和丰富性,在地理信息系统的支持下,提高了对地物变更地块的识别精度。