Study of charge structure and radiation characteristic of intracloud discharge in thunderstorms of Qinghai-Tibet Plateau

The comprehensive observations on lightning discharges were conducted in Naqu area of Qinghai-Tibet Plateau in summer of 2002. The electric structures of thunderstorms and the characteristics of lightning discharges at initial stage were analyzed by using the observation data. The results show that most of intracloud (IC) lightning flashes were polarities inverted in thunderstorms with tripole electric charge structure and occurred between negative charge region located in the middle of the thunderstorm and positive charge region located at the bottom of the thunderstorm. The radiation characteristics of discharge processes in cloud with longer lasting time involved in Cloud-to-Ground (CG) lightning flashes were similar to that of IC discharges.A lot of radiation pulses were produced in these discharge processes. Because the IC discharges took place at the bottom of thundercloud and were near the ground, they may produce more serious damage to equipment on the ground therefore should not be neglected in lightning protection.     

Intergranular coesite and coesite inclusions in dolomite from the Dabie Shan: Constraints on the preservation of coesite in UHP rocks

Intergranular coesite is extremely rare in, and bears crucial information on the formation and preservation of, ultrahigh‐pressure (UHP) rocks. Here, we report the first occurrence of intergranular coesite in a metasedimentary rock, which occurs in the Ganjialing area in the Dabie Shan, east‐central China, and contains abundant coesite inclusions in both garnet and dolomite. We investigated the content of structural water in these minerals with Fourier transform infrared spectroscopy. Our new results undermine the ubiquity of the “pressure‐vessel” model and highlight the role of reaction kinetics in preserving coesite due to the availability of water in UHP rocks.     

沂水县高庄地区铜铅矿地质特征及成矿模式探讨

沂水县高庄铜铅矿赋存于张夏组盘车沟段灰绿色页岩夹薄层泥灰岩和张夏组下灰岩段鲕粒灰岩之间的构造角砾岩中,在形态上和空间位置上严格受蚀变角砾岩带控制的似层状矿体。通过对矿区内地层、控矿构造、矿体特征和矿石质量的分析论述,认为该矿床为碳酸盐型中低温热液充填—交代矿床,并建立了成矿模式。     

Iron Isotopic Fractionation and Origin of Chromitites in the Paleo-Moho Transition Zone of the Kop Ophiolite, NE Turkey

The Kop ophiolite in NE Turkey is a fragment of Neo-Tethyan forearc.It can be mainly divided into a paleo-Moho transition zone(MTZ)in the North and a harzburgitic mantle sequence in the South.Dunites are predominant in the MTZ of the Kop ophiolite,and they are locally interlayered with chromitites and enclose minor bodies of harzburgites near the petrological Moho boundary.Large Fe isotopic variations were observed for magnesiochromite(-0.14‰to 0.06‰)and olivine(-0.12‰to 0.14‰)from the MTZ chromitites,dunites and harzburgites.In individual dunite samples,magnesiochromite usually has lighter Fe isotopic compositions than olivine,which was probably caused by subsolidus Mg-Fe exchange between the two mineral phases.Both magnesiochromite and olivine display an increasing trend ofδ56Fe along a profile from chromitite todunite.This trend reflects continuous fractional crystallization in a magma chamber,which resulted in heavier Fe isotopes concentrated in the evolved magmas.In each cumulative cycle of chromitite and dunite,dunite was formed from relatively evolved melts after massive precipitation of magnesiochromite.Mixing of more primitive and evolved melts in the magma chamber was a potential mechanism for triggering the crystallization of magnesiochromite,generating chromitite layers in the cumulate pile.Before mixing happened,the primitive melts had reacted with mantle harzburgites during their ascendance;whereas the evolved melts may lie on the olivine-chromite cotectic near the liquidus field of pyroxene.Variable degrees of magma mixing and differentiation are expected to generate melts with differentδ56Fe values,accounting for the Fe isotopic variations of the Kop MTZ.     

富水破碎岩体注浆加固材料试验研究与应用

针对富水破碎地层注浆治理过程中传统水泥类材料难以实现注浆加固和堵水同步进行的难题,以硫铝酸盐水泥熟料和钢渣微粉为主要原材,成功制备了一种水泥基复合注浆材料（CGM）。通过与传统水泥材料进行性能对比试验,采用扫描电镜和X射线测试手段,分析了CGM材料制备工艺、组分含量和浆液制备条件对材料性能的作用规律,并检验了CGM材料的工程适用性。结果表明：CGM材料宜采用混合粉磨制备工艺,可显著提高其水化活性,且粉磨时间应不超过45 min。钢渣微粉含量越高,水灰比越大,结石体强度越低,凝结时间越长,水灰比超过1.2:1时,结石体后期会出现干缩。与传统水泥材料相比,CGM材料浆液凝结时间与黏度的环境敏感度低,具有显著的工程适用性和性能优越性。     

持久性有机污染物对环境的影响及对策

概述了《斯德哥尔摩公约》中规定的12种持久性有机污染物及六六六、多环芳烃等持久性有机污染物,以及持久性有机污染物对土壤、水体、农产品及大气的污染状况,并在借鉴国内外先进经验的基础上,根据中国的国情提出了5项对策.     

物源分析的研究与展望

物源分析在盆地分析中具有重要意义,是沉积盆地的大地构造背景判别、古环境恢复的重要依据。本文简要回顾了砂岩成分,阴极发光、古水流流分析以及主元素和重矿物组合分析在物源研究中的应用,着重阐述了稳定同位素测年技术、风化强度的量化ＲＥＥ和痕量元素等地球化学方面的新技术和新方法在物源分析中的应用及其前景,在此基础上指出物源分析应强调利用多种方法进行综合分析,才能获得准确的沉积物源信息。     

沙丘不同部位土壤呼吸对人工降水的响应

 利用LI-8100土壤呼吸测量仪,对古尔班通古特沙漠南缘阜康北部地区沙丘不同部位（坡底、坡中、坡顶）的土壤呼吸速率进行了测量,探讨了沙丘不同部位土壤呼吸速率对降雨的响应,分析了土壤水分和土壤温度对土壤呼吸速率的影响。结果表明:①沙丘不同部位土壤呼吸速率的日变化呈“双峰曲线”,而增雨处理后,土壤呼吸速率的日变化曲线大部分转变为“单峰曲线”。②增雨处理增加了沙丘不同部位土壤呼吸速率的变化幅度、平均值和极差,推后了土壤呼吸速率最大值到来的时间。③土壤呼吸速率与土壤温度的相关性对降雨表现出积极的响应,降雨改变了土壤温度的日变化曲线类型,提高了土壤温度与土壤呼吸速率的相关系数。④非增雨处理时,沙丘坡底、坡中和坡顶的土壤呼吸速率与土壤水分的相关性系数均较高,而增雨处理后,土壤呼吸速率与土壤水分的相关系数有所下降,仅坡中的相关系数通过了α=0.01的显著性检验。     

国产资源三号测绘卫星DSM数据质量评价--以高海拔山区为例

为了评价国产资源三号测绘卫星DSM数据精度,在顾及地貌类型的情况下,以涵盖平原、台地、丘陵等地貌的高海拔山区为研究案例,并以1∶1万实测地形图DEM为假定真值,以90m分辨率SRTM DEM为评价参照,从高程精度和地形描述精度两个方面,对15m分辨率ZY-3DSM进行精度评价分析。研究结果表明:ZY-3DSM高程精度优于SRTM DEM,前者高程中误差仅为后者的1/6;就地形描述精度来讲,ZY-3DSM与SRTM DEM相比,其地形描述精度更接近理论值,前者RMS Et实际值仅为理论值0.99倍,而后者的实际值却是理论值5.13倍。由此看来,ZY-3DSM数据精度整体上高于SRTM DEM。