西太暖池区生物组分对海底表层沉积物物理力学性质的影响

西太平洋暖池区是指位于热带西太平洋及印度洋东部海表温度常年在28 ℃以上的海域,是全球海表温度最高的深海区,构造环境与沉积环境复杂,沉积物中的生物组分含量差异较大,生物组分会对深海沉积物物理力学性质产生显著影响,但目前对沉积物中生物组分含量和沉积物物理力学性质之间的相关性关系尚不明确。本文对西太平洋暖池区核心部位的表层沉积物样品进行现场物理力学性质测试和室内涂片鉴定,研究深海表层沉积物的物理力学性质与生物组分之间的关系。结果表明:研究区表层沉积物含水率范围为61.1%~435.1%,天然密度范围为1.04~1.76 g/cm³,贯入阻力范围为0~100 kPa,十字板剪切强度范围为0~8.6 kPa,整体具有高含水率、低密度、低强度等典型的深海沉积物物理力学性质特点。西加洛林海脊、海山等CCD以浅的区域为钙质生物组分>50%的钙质沉积区;西加洛林海槽西南部及其周边的深水沟槽地区一般为硅质生物组分>50%的硅质沉积;西加洛林海盆内部则主要为黏土沉积区。随钙质生物组分减少和硅质生物组分增多,表层沉积物类型分别为钙质沉积物、黏土沉积物和硅质沉积物,天然含水率变高,天然密度、贯入阻力和十字板剪切强度降低,表明深海表层沉积物的物理力学性质与生物组分含量密切相关:贯入阻力、十字板剪切强度、天然密度与钙质生物组分含量呈正相关,与硅质生物组分含量呈负相关;而天然含水率正好相反,与钙质生物组分含量呈负相关,与硅质生物组分含量呈正相关。本文建立了深海沉积物中生物组分与物理力学性质之间的相关关系,提出了沉积物生物组分含量与物理力学性质之间的拟合公式,可以为深海沉积物工程性质的评价提供参考。     

Source Evolution and Its Relationship to Climate Change Since the Middle–Late Pleistocene in Laizhou Bay,China

Through the geochemical analysis of two hundred-meters cores KD4 and ZK3 from Laizhou Bay,in this study,we determined the distribution law and controlling factors of the geochemical elements.We analyzed 24 elements with respect to their R factors and major principal components,which were combined with the source discrimination functions DFCr/Th and DFCa/Al to obtain the sediment source index and its variation with depth for this area.A comparison of the changes in climate indicators suggests a clear correlation between the source and climate changes.The results show that the Yellow River and surrounding short-term rivers are the main sediment sources in this area.The PC3 of the KD4 core and PC2 of the ZK3 core(e.g.,CaO,MnO,SiO2)exhibit significant variations and reflect the relative contributions of Yellow River sources.The deposition process can be divided into six stages:in Phase I(MIS 5c–MIS 5a),the Yellow River formed,and the composition of the Yellow River had a greater influence on the sedimentary composition of the study area.In Phase II(MIS 5a–MIS 3),the sediment sources of the Yellow River and the short-term streams in this area were wavering,with the sediments derived from short-term rivers playing a more important role.In Phase III(MIS 3),with a sharp drop in temperature,the study area was in the process of retreat,and the sediment source changed from the Yellow River to short-term rivers,after which the Yellow River source material remained the main sediment source for the region.A similar process occurred three more times in Phase IV(MIS 3–MIS 2),Phase V(MIS 2–MIS 1),and Phase VI(MIS 1).With changes in climate,especially during alternating sea-land phases,the sediment source varied in marine-terrestrial-marine phases,and the changes are observed as Yellow River source-surrounding provenance-Yellow River source.However,this process of change is not synchronized with the sea-land strata alternation.     

Evolution of Palaeoenvironment of the South Yellow Sea Since the Last Deglaciation

The sediments in core YS01 recovered from the South Yellow Sea mud deposit zone contain abundant benthic foraminifera, particularly shallow continental shelf species, but rare of planktonic foraminifera. The benthic foraminifera are dominated by stenohaline cold shallow-water species and euryhaline brackish-water species. In this paper, the palaeoenvironmental changes were discussed based on the grain-size compositions and benthic foraminiferal assemblages. Six different benthic foraminiferal assemblages were discriminated by species analysis from the foraminiferal fauna. According to AMS~(14)C dating data in core YS01, we identified four main stages of marine environmental changes since the last deglaciation: a near-shore depositional stage(13.1 – 9.5 kyr B.P.), a transitional stage from near-shore deposition to shallow-sea deposition(9.5 – 5.6 kyr B.P.), a high sea level stage with shallow-sea deposition(5.6–2.9 kyr B.P.), and a stable shallow-sea depositional stage(2.9 kyr B.P. to the present).     

自锐式斜齿柔性砂带轮及其磨抛机理

提出自制的柔性砂带轮，它是用于零件曲表面磨削抛光的新型磨具．该柔性砂带轮的优点是：磨抛噪声低；砂带利用率高；更换周期长。本文给出了该磨具的结构原理，并对其磨抛机理进行了分析探讨．     

顺逆铣加工刷柄曲面的若干特性分析

刷柄侧曲面是典型的曲线形外型表面，其加工方式有顺铣和逆铣两种方法．本文分析了两种铣削方法分别对铣削过程中的切削力，工件表面不平度等几个重要参数的影响，提出了木制品曲面加工中顺铣较逆铣具有消耗动力小，刀具耐用度高，工件不易破裂，加工表面平整等几个突出优点．     

木板梳条机的研制

报导自制的用于制作细木制品坯料的自动化专用设备。其特点是生产效率高，加工面质量好。文中给出了该设备的主要结构和应用实例，并对主轴工作时的稳定性进行了分析．     

西太平洋暖池冰期旋回中的类ENSO式演化及其驱动机制

作为全球接受太阳辐射最多、表层海水温度最高的区域,西太平洋暖池区通过厄尔尼诺-南方涛动(El Niño-Southern Oscillation,ENSO)和季风等过程影响着全球气候的变化。越来越多的沉积记录证明,在地质历史时期西太平洋暖池也存在类似于现代ENSO过程的“类ENSO式”变化。而目前类ENSO式变化与冰期—间冰期旋回之间的响应关系和驱动机制及其与东亚季风的关联仍存在争议。本文利用位于暖池核心区的B10岩心浮游有孔虫氧同位素、Mg/Ca(质量分数比)和黏土矿物参数重建了暖池区氧同位素8期以来的古气候记录,并结合已有的热带海表温度记录、中国石笋氧同位素和南大洋地区海表温度记录,研究了西太平洋暖池冰期旋回中类ENSO状态的演化规律及其与东亚季风的关系,并探讨了暖池区类ENSO演化的驱动机制。结果发现:冰期时,西太平洋暖池区温跃层变浅,赤道东、西太平洋温差减小,同时,东亚夏季风减弱,暖池区降水量相对减少,与现代El Niño时期气候态类似;间冰期时,西太平洋暖池区温跃层加深,赤道东、西太平洋温差增大,东亚冬夏季风增强,暖池区降水量相对增加,与现代La Niña时期气候态类似。频谱分析结果表明,西太平洋暖池区海表温度的变化具有偏心率周期(96 ka)。冰消期时,低纬度太阳辐射量的增加,增大了纬向上的SST梯度,并使得次表层海水储存了更多的热量,积累的热量会通过调节次表层环流向暖池区的热传输,最终调控赤道太平洋地区Walker环流强度和ENSO活动的长期变化。而冰期时,南大洋地区降温所引起的东南信风和大洋环流异常可能对类ENSO式起到调控的作用。     

热带西太平洋碳酸盐溶跃深度及其变化规律

碳酸盐的溶解与保存是全球碳循环的重要组成部分,研究碳酸盐溶解作用对探索碳循环机制、理解全球气候变化机理等具有重要意义。本文通过西太平洋暖池核心区雅浦海沟南部附近海域108个表层沉积物和3个柱状沉积物样品中浮游有孔虫、底栖有孔虫和碳酸钙含量等变化特征分析了海底碳酸盐溶跃深度、补偿深度及其自中更新世以来的变化规律。表层沉积物碳酸盐含量、浮游与底栖有孔虫丰度、底栖有孔虫占有孔虫全群比例、底栖有孔虫群中胶结质壳比例等多种指标变化表明,本区现代碳酸盐溶跃面(carbonate lysocline depth, CLD)位于水深3800m附近,碳酸盐补偿深度(carbonate compensation depth, CCD)约为4800m。柱状样有孔虫溶解指数(foraminifera dissolution index, FDX）的变化表明,冰期碳酸盐溶解作用减弱,碳酸盐溶跃面和补偿深度变深;冰消期碳酸盐溶解作用增强,溶跃面和补偿深度变浅。位于现代溶跃面附近的柱状岩心碳酸盐含量呈现冰期高、间冰期低的“太平洋型”旋回特征,同时古生产力替代性指标的变化曲线与碳酸盐含量没有明显的相关性,说明中更新世以来的碳酸盐含量变化主要受溶解作用的控制,特别是在冰期- 间冰期转换时期更为明显。     

基于ADCP反演渤海湾悬浮体浓度年变化

基于座底ADCP实测回波强度信号,结合短期实测悬浮体质量浓度,反演长时间序列悬浮体质量浓度,定量分析了渤海湾近一年悬浮体质量浓度变化特征及其影响因素。结果表明:受风浪影响,该区悬浮体质量浓度具有明显季节性变化特征,风浪作用强烈的季节其悬浮体浓度表现为相对高值。悬浮体净输运同样具明显季节性变化,秋冬强风浪作用下,悬浮体的净输运量明显增加;而在不同季节,月净输运方向具有不同的主输运方向。悬浮体质量浓度日变化受潮流控制明显,长周期变化则主要与风场的变化有关。潮流涨急过程与风致大浪过程均可引起沉积物再悬浮,导致悬浮体浓度明显增高。     

An experimental study of seabed responses around a marine pipeline under wave and current conditions

Experiments on three types of soil (d₅₀=0.287, 0.057 and 0.034 mm) with pipeline(D=4 cm) either half buried or resting on the seabed under regular wave or combined with current actions were conducted in a large wave flume to investigate characteristics of soil responses. The pore pressures were measured through the soil depth and across the pipeline. When pipeline is present the measured pore pressures in sandy soil nearby the pipeline deviate considerably from that predicted by the poro-elasticity theory. The buried pipeline seems to provide a degree of resistance to soil liquefaction in the two finer soil seabeds. In the silt bed, a negative power relationship was found between maximum values of excess pore pressure p_max and test intervals under the same wave conditions due to soil densification and dissipation of the pore pressure. In the case of wave combined with current, pore pressures in sandy soil show slightly decrease with time, whereas in silt soil, the current causes an increase in the excess pore pressure build-up, especially at the deeper depth. Comparing liquefaction depth with scour depth underneath the pipeline indicates that the occurrence of liquefaction is accompanied with larger scour depth under the same pipeline-bed configuration.