The electrical structure of the Slave craton

The Slave craton in northwestern Canada, a relatively small Archean craton (600×400 km), is ideal as a natural laboratory for investigating the formation and evolution of Mesoarchean and Neoarchean sub-continental lithospheric mantle (SCLM). Excellent outcrop and the discovery of economic diamondiferous kimberlite pipes in the centre of the craton during the early 1990s have led to an unparalleled amount of geoscientific information becoming available.

Over the last 5 years deep-probing electromagnetic surveys were conducted on the Slave, using the natural-source magnetotelluric (MT) technique, as part of a variety of programs to study the craton and determine its regional-scale electrical structure. Two of the four types of surveys involved novel MT data acquisition; one through frozen lakes along ice roads during winter, and the second using ocean-bottom MT instrumentation deployed from float planes.

The primary initial objective of the MT surveys was to determine the geometry of the topography of the lithosphere–asthenosphere boundary (LAB) across the Slave craton. However, the MT responses revealed, completely serendipitously, a remarkable anomaly in electrical conductivity in the SCLM of the central Slave craton. This Central Slave Mantle Conductor (CSMC) anomaly is modelled as a localized region of low resistivity (10–15 Ω m) beginning at depths of 80–120 km and striking NE–SW. Where precisely located, it is spatially coincident with the Eocene-aged kimberlite field in the central part of the craton (the so-called “Corridor of Hope”), and also with a geochemically defined ultra-depleted harzburgitic layer interpreted as oceanic or arc-related lithosphere emplaced during early tectonism. The CSMC lies wholly within the NE–SW striking central zone defined by Grütter et al. [Grütter, H.S., Apter, D.B., Kong, J., 1999. Crust–mantle coupling; evidence from mantle-derived xenocrystic garnets. Contributed paper at: The 7th International Kimberlite Conference Proceeding, J.B. Dawson Volume, 1, 307–313] on the basis of garnet geochemistry (G10 vs. G9) populations.

Deep-probing MT data from the lake bottom instruments infer that the conductor has a total depth-integrated conductivity (conductance) of the order of 2000 Siemens, which, given an internal resistivity of 10–15 Ω m, implies a thickness of 20–30 km. Below the CSMC the electrical resistivity of the lithosphere increases by a factor of 3–5 to values of around 50 Ω m. This change occurs at depths consistent with the graphite–diamond transition, which is taken as consistent with a carbon interpretation for the CSMC.

Preliminary three-dimensional MT modelling supports the NE–SW striking geometry for the conductor, and also suggests a NW dip. This geometry is taken as implying that the tectonic processes that emplaced this geophysical–geochemical body are likely related to the subduction of a craton of unknown provenance from the SE (present-day coordinates) during 2630–2620 Ma. It suggests that the lithospheric stacking model of Helmstaedt and Schulze [Helmstaedt, H.H., Schulze, D.J., 1989. Southern African kimberlites and their mantle sample: implications for Archean tectonics and lithosphere evolution. In Ross, J. (Ed.), Kimberlites and Related Rocks, Vol. 1: Their Composition, Occurrence, Origin, and Emplacement. Geological Society of Australia Special Publication, vol. 14, 358–368] is likely correct for the formation of the Slave's current SCLM.     

Disjunctive Kriging with Hard and Imprecise Data

This paper presents a methodology for assessing local probability distributions by disjunctive kriging when the available data set contains some imprecise measurements, like noisy or soft information or interval constraints. The basic idea consists in replacing the set of imprecise data by a set of pseudohard data simulated from their posterior distribution; an iterative algorithm based on the Gibbs sampler is proposed to achieve such a simulation step. The whole procedure is repeated many times and the final result is the average of the disjunctive kriging estimates computed from each simulated data set. Being data-independent, the kriging weights need to be calculated only once, which enables fast computing. The simulation procedure requires encoding each datum as a pre-posterior distribution and assuming a Markov property to allow the updating of pre-posterior distributions into posterior ones. Although it suffers some imperfections, disjunctive kriging turns out to be a much more flexible approach than conditional expectation, because of the vast class of models that allows its computation, namely isofactorial models.     

Construction of Structural Geological Model Using Monte Carlo Simulation

Geotechnical and Geological Engineering - To optimize the prediction of structural geological conditions in the underground as of data collected at the surface, due to the usual great uncertainties...     

Spectral simulation of vector random fields with stationary Gaussian increments in <Emphasis Type="Italic">d</Emphasis>-dimensional Euclidean spaces

This paper addresses the problem of simulating multivariate random fields with stationary Gaussian increments in a d-dimensional Euclidean space. To this end, one considers a spectral turning-bands algorithm, in which the simulated field is a mixture of basic random fields made of weighted cosine waves associated with random frequencies and random phases. The weights depend on the spectral density of the direct and cross variogram matrices of the desired random field for the specified frequencies. The algorithm is applied to synthetic examples corresponding to different spatial correlation models. The properties of these models and of the algorithm are discussed, highlighting its computational efficiency, accuracy and versatility.     

Tuning the second-generation SDI: theoretical aspects and real use cases

Spatial data infrastructure (SDI) actors have great expectations for the second-generation SDI currently under development. However, SDIs have many implementation problems at different levels that are delaying the development of the SDI framework. The aims of this article are to identify these difficulties, in the literature and based on our own experience, in order to determine how mature and useful the current SDI phenomena are. We can then determine whether a general reconceptualization is necessary or rather a set of technical improvements and good practices needs to be developed before the second-generation SDI is completed. This study is based on the following aspects: metadata about data and services, data models, data download, data and processing services, data portrayal and symbolization, and mass market aspects. This work aims to find an equilibrium between user-focused geoportals and web service interconnection (the user side vs. the server side). These deep reflections are motivated by a use case in the healthcare area in which we employed the Catalan regional SDI. The use case shows that even one of the best regional SDI implementations can fail to provide the required information and processes even when the required data exist. Several previous studies recognize the value of applying Web 2.0 and user participation approaches but few of these studies provide a real implementation. Another objective of this work is to show that it is easy to complement the classical, international standard-based SDI with a participative Web 2.0 approach. To do so, we present a mash-up portal built on top of the Catalan SDI catalogues.     

Geochemical and hydrodynamic constraints on the distribution of trace metal concentrations in the lagoon of Nouméa, New Caledonia

Seawater samples were collected in the lagoon of Nouméa (southwest New Caledonia) along two transects from eutrophic coastal bays to the oligotrophic barrier reef. Land-based emissions to the lagoon were measured with dissolved and particulate concentrations of chromium (Cr) and nickel (Ni), used as tracers of both terrigenous and industrial (Ni ore treatment) activities, as well as dissolved and particulate concentrations of zinc (Zn), used as a tracer of urban effluents. The spatial variability of metal concentrations was related to geochemical and hydrodynamic conditions, i.e., respectively: (1) natural and anthropogenic emission sources, and chemical processes occurring in the water column; and (2) water residence times. The parameter used to describe the residence time of water masses was the local e-flushing time, i.e. the time required for a tracer mass contained within a given station to be reduced by a factor 1/e. High metal concentrations were found in coastal areas (up to 9000 ng dissolved Ni L⁻¹), and steeply decreased with distance from the coast (down to 101 ng dissolved Ni L⁻¹ near the barrier reef) to reach levels similar to those found in remote Pacific waters, suggesting a rapid renewal of waters close to the barrier. Distributions of metals in the lagoon are controlled upstream by land-based emission sources and later chemical processes. Then hydrodynamics constrain metal distributions, as shown by the observed relationship between local e-flushing times and the spatial variability of metal concentrations. In addition, a change in the direction of prevailing winds yielded a decrease of dissolved metal concentrations at the same site by a factor of 2.5 (Cr and Ni) and 2.9 (Zn). It is suggested that the residence time is a key parameter in the control of elemental concentrations in the lagoon waters, as much as land-based emission sources.     

Analysis of seafloor backscatter strength dependence on the survey azimuth using multibeam echosounder data

The sediment backscatter strength measured by multibeam echosounders is a key feature for seafloor mapping either qualitative (image mosaics) or quantitative (extraction of classifying features). An important phenomenon, often underestimated, is the dependence of the backscatter level on the azimuth angle imposed by the survey line directions: strong level differences at varying azimuth can be observed in case of organized roughness of the seabed, usually caused by tide currents over sandy sediments. This paper presents a number of experimental results obtained from shallow-water cruises using a 300-kHz multibeam echosounder and specially dedicated to the study of this azimuthal effect, with a specific configuration of the survey strategy involving a systematic coverage of reference areas following “compass rose” patterns. The results show for some areas a very strong dependence of the backscatter level, up to about 10-dB differences at intermediate oblique angles, although the presence of these ripples cannot be observed directly—neither from the bathymetry data nor from the sonar image, due to the insufficient resolution capability of the sonar. An elementary modeling of backscattering from rippled interfaces explains and comforts these observations. The consequences of this backscatter dependence upon survey azimuth on the current strategies of backscatter data acquisition and exploitation are discussed.     

Active spreading and hydrothermalism in North Fiji Basin (SW Pacific). Results of Japanese French Cruise Kaiyo 87

The aim of the Japanese-French Kaiyo 87 cruise was the study of the spreading axis in the North Fiji Basin (SW Pacific). A Seabeam and geophysical survey allowed us to define the detailed structure of the active NS spreading axis between 16° and 22° S and its relationships with the left lateral motion of the North Fiji Fracture Zone. Between 21° S and 18°10′ S, the spreading axis trends NS. From 18°10 S to 16°40 S the orientation of the spreading axis changes from NS to 015°. North of 16°40′ S the spreading axis trends 160°. These two 015° and 160° branches converge with the left lateral North Fiji fracture zone around 16°40′ S to define an RRFZ triple junction. Water sampling, dredging and photo TV deep towing give new information concerning the hydrothermal activity along the spreading axis. The discovery of hydrothermal deposits associated with living communities confirms this activity.     

Sea,freshwater or saltpans? Foraging ecology of terns to assess mercury inputs in a wetland landscape: The Ebro Delta

The Ebro catchment, the largest river basin in Spain, includes various heavily industrialized areas. Among these is the Flix site, where a chemical plant has been operating since the beginning of the 20th century. This extended operational period, together with the construction of a dam next to the factory around 1960, resulted in the accumulation of large amounts of heavily polluted sediments in the adjacent riverbed, many of which are contaminated by mercury. Pollutants from Flix are carried downstream by the Ebro River to its delta. In order to assess the transfer of mercury to the complex river estuary ecosystem, we studied the ecology of the tern community living there as these birds segregate into a range of habitats. For this purpose, first we used stable isotope analysis (SIA) (δ³⁴S, δ¹³C, δ¹⁵N) of eggs to determine the trophic ecology and habitat partitioning of several tern species (Common, Sandwich, Little, Gull-Billed and Whiskered Tern) breeding sympatrically, in order to link their foraging ecology with habitat types. Next we measured mercury concentrations in eggs to monitor the input of this metal into the diverse habitats. With the exception of the Little Tern, the other terns used a restricted habitat range in the Ebro Delta, as shown by C and S isotopes; the Gull-Billed and Whiskered Tern foraged in freshwater habitats, while the Common and Sandwich Tern used marine habitats. This restricted feeding behavior of the Gull-Billed and Common Tern contrasts with previous reports in other breeding sites. The Little Tern, which showed a wide range of isotopic values, was found to be an opportunistic forager but fed mainly in saltpans, a feeding habitat not reported previously for this species in this area. We found that mercury concentrations are related to foraging habitat and diet, and are unexpectedly higher in species feeding on demersal prey in marine habitats and also higher in birds feeding in saltpans than in those feeding in freshwater habitats. The mercury concentrations found in the Little and Common Tern eggs sampled in “Punta de la Banya” may be sufficiently high to endanger breeding success.