The mass of the white dwarf in the recurrent nova U Scorpii

We present spectroscopy of the eclipsing recurrent nova U Sco. The radial velocity semi-amplitude of the primary star was found to be     from the motion of the wings of the He  ii λ 4686-Å emission line. By detecting weak absorption features from the secondary star, we find its radial velocity semi-amplitude to be     . From these parameters, we obtain a mass of     for the white dwarf primary star and a mass of     for the secondary star. The radius of the secondary is calculated to be     , confirming that it is evolved. The inclination of the system is calculated to be     , consistent with the deep eclipse seen in the light-curves. The helium emission lines are double-peaked, with the blueshifted regions of the disc being eclipsed prior to the redshifted regions, clearly indicating the presence of an accretion disc. The high mass of the white dwarf is consistent with the thermonuclear runaway model of recurrent nova outbursts, and confirms that U Sco is the best Type Ia supernova progenitor currently known. We predict that U Sco is likely to explode within ∼700 000 yr.     

Hawaiian basalt and Icelandic rhyolite: Indicators of differentiation and partial melting

In spite of the voluminous basaltic volcanism on the island of Hawaii, rhyolite is not produced. Iceland, on the other hand, exhibits common rhyolitic volcanism amounting to some 10–12% of its surface rocks. This contrast is investigated using the fundamental igneous processes exhibited by sheet-like Hawaiian lava lakes and Shonkin Sag laccolith in Montana. Highly differentiated, residual melts normally reside within inwardly advancing solidification fronts and are generally inaccessible to eruptive processes. Only when a large initial phenocryst population is present, from which a thick basal cumulate can rapidly form, is it possible to supply highly differentiated melt into the active (i.e., eruptable) portion of the magma chamber. Although there is protracted control of differentiation at Hawaii by settling of olivine, further differentiation occurs within the solidification fronts. Only by repeated transport and holding is it possible to differentiate beyond the critical composition of the leading edge of the solidification front ( 7% MgO and 51.5% SiO₂). Crystal size distributions (CSDs) for Hawaii and Shonkin Sag are used to demonstrate the inferred physical and chemical processes of solidification, including the kinetics of crystallization.A ubiquitous feature of these basaltic bodies is the formation of coarse veins and segregations of refined melt and granophyres within the upper solidification front. It is this fundamental bimodal feature which is the key to understanding Icelandic silicic volcanism.Rhyolites in Iceland occur mainly as a bimodal population with basalts associated with central volcanoes. Rhyolites, granophyres, and felsites are common, with the intrusions often being layered. Ash flows and true granite-like intrusions are rare. The voluminous silicic lavas at Torfajokull central volcano contain disequilibrium phenocryst assemblages. This, and the disagreement in oxygen isotopic values between rhyolites and basalts, reflects extensive partial melting of the heterogeneous basaltic crust of Iceland to produce these rhyolites. Relatively small, chemically distinct, and spatially intimate silicic bodies are formed by concentrating granophyric segregations from earlier cycles of solidification. This process is also reflected in the layered granophyric instrusion of Slaufrudalur in eastern Iceland. Slaufrudalur is an unvented subterranean caldera, equivalent in igneous processes and style to the subaerial Torfajokull caldera.Hawaii is dominated by fractional crystallization due to crystal settling and does not produce rhyolite. Iceland's tectonics allow continual and extensive reprocessing of thin, hot basaltic crust which produces rhyolite by concentrating original silicic segregations and veins and by partially melting intermediate extrusives, which have subsided deep into the crust.

---

Zusammenfassung Auf Hawaii treten, trotz intensiven Basalt-Vulkanismusses, keine Rhyolithe auf. Auf Island dagegen ist Rhyolith, mit 10–12% des anstehenden Gesteins, verbreitet. Dieser Kontrast wurde anhand grundlegender magmatischer Prozesse untersucht, wie sie in flachen Lava-Seen Hawaiis und im Shonkin Sag Laccolith Montanas auftreten. Hochdifferenzierte Restschmelzen verbleiben innerhalb langsam nach innen vorrückender Erstarrungsfronten und sind meist unerreichbar für eruptive Prozesse. Nur wenn anfänglich bereits große Mengen von Einsprenglingen vorhanden sind, die rasch am Boden der Magmenkammer akkumulieren, kann eine hochdifferenzierte Schmelze in den aktiven (d.h. eruptiven) Teil der Magmenkammer gelangen. Obwohl auf Hawaii die Differentiation durch die Kristallisation von Olivin anhaltend kontrolliert wird, findet an der Erstarrungsfront weitere Differentiation statt. Nur durch wiederholten Transport und zeitweiliges Verharren ist es möglich, über die kritische Zusammensetzung der vordersten Erstarrungsfront hinaus zu differenzieren (ca. 7% MgO und 51,5% SiO₂). An Kristallgrö-ßenverteilungen (CDS) von Hawaii und Shonkin Sag können die angenommenen physikalischen und chemischen Prozesse der Kristallisation und die Kristallisationskinetik gezeigt werden. Ein weit verbreitetes Merkmal dieser Basaltkörper ist die Bildung grobkristalliner Gänge und Absonderung von stark differenzierten Schmelzen und Granophyren innerhalb der oberen Erstarrungsfront. Diese ausgeprägt bimodale Charakteristik ist der Schlüssel zum Verständnis des sauren isländischen Vulkanismus.Isländische Rhyolithe treten meist in bimodaler Verbreitung mit Basalten in Zusammenhang mit zentralen Vulkanen auf. Rhyolithe, Granophyre und Feisite sind häufig, in oft geschichteten Intrusionen. Ignimbrite und echte Granitintrusionen sind selten. Die großen Mengen SiO₂-reicher Laven am Torfajokull-Zentralvulkan enthalten Ein-sprenglinge, die sich nicht im Gleichgewicht mit der Matrix befinden. Dies, und die unterschiedlichen delta-¹⁸O-Werte von Rhyolithen und Basalten, zeigen, daß ausgeprägtes teilweises Aufschmelzen der heterogenen Basaltkruste von Island zur Produktion dieser Rhyolithe führte. Relativ kleine, nahe benachbarte saure Körper, die aber deutliche Unterschiede in ihrem Chemismus aufweisen, werden gebildet durch die Konzentration granophyrischer Teilschmelzen aus früheren Kristallisationszyklen. Dieser Vorgang wird auch widergespiegelt in der »layered intrusions« von Slaufrudalur in Ostisland. Slaufrudalur ist eine geschlossene unterirdische Kaldera, deren magmatische Prozesse und Baustil der subaerischen Torfajokull-Kaldera entsprechen.Die Prozesse in Hawaii sind dominiert von gravitativer Kristallisationsdifferentiation und es werden keine Rhyolithe produziert. Die isländische Tektonik führt zu kontinuierlicher starker Wiederaufarbeitung von dünner, heißer basaltischer Kruste. Dabei wird, durch die Konzentration ursprünglicher saurer Teilschmelzen und Gänge und durch die teilweise Aufschmelzung intermediärer Intrusiva, die tief in die Kruste abgesunken sind, Rhyolith produziert.

---

Résumé En dépit du volcanisme basaltique volumineux des îles Hawaï, il n'y existe pas de rhyolite. En Islande, par contre, le volcanisme rhyolitique est commun et représente 10 à 12% des roches de la surface. Ce contraste est examiné sur la base des processus ignés fondamentaux présentés par les lacs de lave d'Hawaï et le laccolite de Shonkin Sag au Montana. Normalement, les liquides résiduels hautement différenciés résident à l'intérieur des fronts de solidification qui progressent vers l'arrière et sont généralement à l'abri des processus éruptifs. Ce n'est que dans le cas d'une population initiale abondante de phénocristaux, qui se rassemblent dans un cumulat basai épais, que des liquides hautement différenciés peuvent être fournis à la portion active (c'est-à-dire »éruptible«) de la chambre magmatique. A Hawaï, bien que la différenciation soit continuellement régie par la cristallisation d'olivine, la poursuite du processus a lieu à l'intérieur des fronts de solidification. Ce n'est que par la répétition d'actions de transport et de stagnation qu'il est possible de différencier audelà de la composition critique du front de solidification (±7% MgO et 51,5% SiO₂). A partir de la distribution de la taille des cristaux à Hawaï et à Shonkin Sag, on peut déduire les processus physique et chimique de la solidification, y compris la cinétique de la cristallisation.Une particularité courante de ces corps basaltiques est la formation de veines grenues et de ségrégations de liquides très différenciés et de granophyres à l'intérieur du front supérieur de solidification. Cette manifestation bimodale est la clé qui permet de comprendre le volcanisme siliceux islandais.En Islande, les rhyolites constituent d'ordinaire une population bimodale avec les basaltes centraux. Les rhyolites, les granophyres et les felsites sont fréquents, et souvent sous forme d'intrusions litées. Les coulées ardentes et les vraies intrusions de type granitique sont rares. Les volumineuses laves siliceuses du volcan central de Torfajokull contiennent des assemblages de phénocristaux en déséquilibre. Ce fait, ainsi que la non concordance des isotopes de l'oxygène entre rhyolites et basaltes, traduisent, à l'origine de ces rhyolites, une fusion partielle extensive de la croûte basaltique hétérogène d'Islande. Des corps siliceux relativement petits et chimiquement distincts bien que d'emplacements très voisins se sont formés par concentration de fusions partielles granophyriques lors des premiers cycles de solidification. Ce processus s'exprime également dans l'intrusion granophyrique litée de Slaufrudalur, en Islande orientale. Slaufrudalur est une caldeira souterraine fermée, équivalente par son style et son processus igné à la caldeira subaérienne de Torfajokull.A Hawaï, le phénomène dominant est la cristallisation fractionnée gravitative, sans production de rhyolite. La tectonique de l'Islande permet la régénération continue et extensive d'une mince croûte basaltique chaude. Les rhyolites y sont engendrées par la concentration des veines et ségrégations siliceuses originelles et par la fusion partielle de masses extrusives intermédiaires descendues profondément dans la croûte.

---

, . , 10–12% . , Shonkin Sag Laccolith Montanas. . , , . , . . ( 7% MgO 51,5% SiO₂). (CDS) Shonkin Sag , , . . . . , , . . , Torfajokull , ., ¹⁸O , . , , , , « » («layered intrusions») Slaufrudalur, . , , Torfajokull. . . , , , .

     

Large-scale Mechanical Redistribution of Orthopyroxene and Plagioclase in the Basement Sill, Ferrar Dolerites, McMurdo Dry Valleys, Antarctica: Petrological, Mineral-chemical and Field Evidence for Channelized Movement of Crystals and Melt

The Jurassic Ferrar dolerite sills of the McMurdo Dry Valleys,Antarctica represent the plumbing system for flood basalt eruptionsassociated with the breakup of Gondwana. Among the Ferrar sills,the 350–450 m thick cumulate-textured Basement Sill isdifferentiated into a Lower Marginal Zone (LMZ) gabbronorite,a thick Lower Zone (LZ) orthopyroxene–plagioclase orthocumulatepyroxenite, a strongly layered mela- to leuco-gabbronorite MiddleZone (MZ), a thick Upper Zone (UZ) gabbronorite with ferrogabbroicpods, and an Upper Marginal Zone (UMZ) gabbronorite. Texturesand mineral compositions in the LZ pyroxenite and MZ–UZgabbronorites are nearly identical, the main distinction beingthe greater relative proportion of plagioclase in the MZ–UZgabbronorites, and of pigeonite in the UZ. Most orthopyroxenein the LZ, MZ and UZ occurs as sub-euhedral, normally zonedprimocrysts, commonly with rounded plagioclase inclusions. Plagioclaseis usually sub-euhedral and normally zoned, but can containsodic cores interpreted to be xenocrystic. Orthopyroxene andfeldspar compositions thoughout the sill are generally fairlyuniform, and resemble the compositions of micro-phenocrystsin the chilled margins. We infer that the sill was filled bya c. 1250°C slurry of orthopyroxene + plagioclase phenocrystsor primocrysts that subsequently unmixed in response to buoyancyforces. The LZ websterite contains numerous anorthosite to gabbronoriteschlieren, veins and pipes (< 2 m diameter), which we interpretas fossil segregation channels. Textures and mineral compositionsin these felsic channels are very similar both to UZ and MZgabbronorites, and to the groundmass separating accumulatedorthopyroxene primocrysts in the LZ and MZ. We infer that plagioclase-charged,hydrous pore melt from the pyroxenite may have segregated, pooledand ascended through these conduits to feed growth of the UZgabbronorite. Detailed mapping shows that the pipes are separatedby about 15 m on average. Calculations suggest that this numberdensity of conduits could have drained the LZ cumulates of theirinterstitial melt + plagioclase in about 8 days. Sequences (eachc. 5–10 m thick) of layered leuco-gabbronorite in theMZ could represent intra-cumulate sills that formed from plagioclase-richslurries ascending in segregation channels. Fe–Ti-richpyroxenitic veins and pods (some pegmatitic) and an unusualcoarse-grained plagioclase facies occur at the contacts betweenmassive leuco-gabbronorite layers in the MZ. Discordant ferro-pegmatitepods and dykes occur throughout the UZ. We interpret these Fe-richpegmatoidal rocks as evolved residual melts expelled from thecompacting gabbronoritic cumulates of the MZ and UZ. KEY WORDS: Ferrar; cumulates; differentiation; Antarctica; layering     

The concentrations of the noble metals in Southern African flood-type basalts and MORB: implications for petrogenesis and magmatic sulphide exploration

Concentrations of the platinum-group elements have been determined in several suites of southern African flood-type basalts and mid-ocean ridge basalt (MORB), covering some 3 Ga of geologic evolution and including the Etendeka, Karoo, Soutpansberg, Machadodorp, Hekpoort, Ventersdorp and Dominion magmas. The magmas cover a compositional range from 3.7 to 18.7% MgO, 26–720 ppm Ni, 16–250 ppm Cu, and <1–255 ppb total platinum-group elements (PGE). The younger basalts (Etendeka, Karoo) tend to be depleted in PGE relative to Cu, while most of the older basalts (Hekpoort, Machadodorp, Ventersdorp, Dominion) show no PGE depletion relative to Cu. Further, the younger basalts tend to have lower average Pt/Pd ratios than the older basalts, and the MORBs have lower average Pt/Pd than the continental basalts within the broad groupings of "old" and "young" basalts. This may reflect (1) a decreasing degree of mantle melting through geologic time, and (2) source heterogeneity, in that the MORBs are derived from predominantly asthenospheric mantle, whereas the continental basalts also contain a lithospheric mantle component enriched in Pt. In addition to these factors, some PGE fractionation also occurred during differentiation of the magmas, with Pd showing incompatible behaviour and the other PGE variably compatible behaviour. The examined southern African flood-type basalts and MORB appear to offer limited prospects for magmatic sulfide ores, largely because they show little evidence for significant chalcophile metal depletion that could be the result of sulphide extraction during ascent and crystallization.Editorial responsibility: I. Parsons     

A New Reference Material for Tritium Organic Molecules in Sediment: Results of an International Intercomparison Exercise

Solid matrix ³H reference materials are challenging to prepare given the volatile nature of ³H and are often unrepresentative of the range of ³H forms that may be encountered during routine analysis. As a result, few ³H reference materials are currently available, undermining verification of analytical techniques for environmental ³H measurement. To address this, an International Working Group on Organically‐Bound Tritium Analysis determined to produce a tritium natural matrix reference material (NMRM). The reference material comprises marine sediment blended with sewage sludge contaminated with ³H‐organic species arising from authorised discharges from a radiopharmaceutical manufacturing site. Previous studies have demonstrated that the ³H species have persisted in the environment over three decades providing valuable supporting data to underpin the characterisation of the NMRM. The preparation and characterisation of the NMRM are described along with the subsequent application of the reference material in an international intercomparison exercise involving nineteen laboratories from nine countries. A reference value of 168 ± 22 Bq kg^?1 was derived from the data arising from the proficiency test.     

The effects of beach nourishment on the sandy-beach amphipod Exoediceros fossor: impact and recovery in Botany Bay, New South Wales, Australia

Beach nourishment is increasingly being implemented to address problems of erosion. However, the ecological consequences of nourishment are poorly understood, especially in Australia. In Botany Bay, sand was piped from an intertidal borrow area at Elephant's Trunk to nourish the nearby eroding beach at Towra Point. The effects on an intertidal exoedicerotid amphipod, Exoediceros fossor (Stimpson, 1856), were examined using a beyond-BACI (Before–After, Control–Impact) sampling design. Sampling was conducted before and after engineering operations at sites within the borrow and nourishment locations and multiple control locations. Hypotheses concerning impact and recovery were tested using asymmetrical ANOVAs and two-tailed F-tests. These examined the effects on abundance and spatial variability, respectively. The impact of the engineering operations on abundance was very large at both borrow and nourishment locations. However, recovery started within several weeks and, using space × time interactions as a criterion, appeared to be complete within a year. This conclusion is made cautiously because of low statistical power and because other criteria for recovery suggest that it was not complete at some sites. As beach erosion is likely to increase in severity with rising sea levels and greater storm surges associated with climate change, management authorities will need a better understanding of the ecological effects of beach nourishment.     

Terrestrial discharge influences microbioerosion and microbioeroder community structure in coral reefs

Microbioerosion rates and microbioeroder community structure were studied in four Kenyan protected coral-reef lagoons using shell fragments of Tridacna giant clams to determine their response to the influence of terrestrial run-off. Fourteen different microbioeroder traces from seven cyanobacteria, three green algae and four fungi species were identified. The river discharge-impacted reef and ‘pristine’ reef showed similar composition but higher microbioeroder abundance and total cyanobacteria- and chlorophyte-bioeroded areas when compared with the other study reefs. Cyanobacteria dominated during the north-east monsoon (NEM) relative to the south-east monsoon (SEM) season, with algae and cyanobacteria being major microbioeroders in the river-impacted and pristine reefs. The rate of microbioerosion varied between 4.3 g CaCO3 m^?2 y^?1 (SEM) and 134.7 g CaCO₃ m^?2 y^?1 (NEM), and was highest in the river-impacted reef (127.6 g CaCO₃ m^?2 y^?1), which was almost double that in the pristine reef (69.5 g CaCO₃ m^?2 y^?1) and the mangrove-fringed reef (56.2 g CaCO₃ m^?2 y^?1). The microbioerosion rates measured in this study may not be high enough to cause concern with regard to the health and net carbonate production of Kenya’s coral reefs. Nevertheless, predicted increases in the frequency and severity of stresses related to global climate change (e.g. increased sea surface temperature, acidification), as well as interactions with local disturbances and their influence on bioerosion, may be increasingly important in the future.     

Developing a large‐scale water‐balance approach to seasonal forecasting: application to the 2012 drought in Britain

Seasonal hydrological forecasts, or outlooks, can potentially provide water managers with estimates of river flows and water resources for a lead time of several months ahead. An experimental modelling tool for national hydrological outlooks has been developed which combines a hydrological model estimate of sub‐surface water storage across Britain with a range of seasonal rainfall forecasts to provide estimates of area‐wide hydrological conditions up to a few months ahead. The link is made between a deficit in sub‐surface water storage and a requirement for additional rainfall over subsequent months to enable sub‐surface water storage and river flow to return to mean monthly values. The new scheme is assessed over a recent period which includes the termination of the drought that affected much of Britain in the first few months of 2012. An illustration is provided of its use to obtain return‐period estimates of the ‘rainfall required’ to ease drought conditions; these are well in excess of 200 years for several regions of the country, for termination within a month of 1 April 2012, and still exceed 40 years for termination within three months. National maps of sub‐surface water storage anomaly show for the first time the current spatial variability of drought severity. They can also be used to provide an indication of how a drought situation might develop in the next few months given a range of possible future rainfall scenarios. © 2013 CEH/Crown and John Wiley & Sons, Ltd.