The Relationship of Green-Line Transients to White-Light Coronal Mass Ejections

We report observations by the Large Angle Spectrometric Coronagraph (LASCO) on the SOHO spacecraft of three coronal green-line transients that could be clearly associated with coronal mass ejections (CMEs) detected in Thomson-scattered white light. Two of these events, with speeds >25 km s^-1, may be classified as ‘whip-like’ transients. They are associated with the core of the white-light CMEs, identified with erupting prominence material, rather than with the leading edge of the CMEs. The third green-line transient has a markedly different appearance and is more gradual than the other two, with a projected outward speed <10 km s^-1. This event corresponds to the leading edge of a ‘streamer blowout’ type of CME. A dark void is left behind in the emission-line corona following each of the fast eruptions. Both fast emission-line transients start off as a loop structure rising up from close to the solar surface. We suggest that the driving mechanism for these events may be the emergence of new bipolar magnetic regions on the surface of the Sun, which destabilize the ambient corona and cause an eruption. The possible relationship of these events to recent X-ray observations of CMEs is briefly discussed. Supplementary material to this paper is available in electronic form at http://dx.doi.org/10.1023/A:1004981125702     

Reconstructing the 3D Morphology of the 17 May 2008 CME

We model the kinematics and three-dimensional distribution of mass in a coronal mass ejection (CME) observed on 17 May 2008, using a comprehensive analysis of STEREO images of the CME. The CME is a surprisingly fast one for solar minimum, reaching velocities of up to 1120 km?s^?1. It can be followed continuously from inception all the way out to 1 AU. We find that the appearance of the CME can be modeled reasonably well as a combination of two distinct fronts that expand outward in a self-similar fashion. The model implies that STEREO-B is struck by the weaker of these two fronts on 19 May, and the in situ instruments on STEREO-B do see a weak density and magnetic field enhancement at the expected time.     

The Large Angle Spectroscopic Coronagraph (LASCO)

The Large Angle Spectroscopic Coronagraph (LASCO) is a three coronagraph package which has been jointly developed for the Solar and Heliospheric Observatory (SOHO) mission by the Naval Research Laboratory (USA), the Laboratoire d'Astronomie Spatiale (France), the Max-Planck-Institut für Aeronomie (Germany), and the University of Birmingham (UK). LASCO comprises three coronagraphs, C1, C2, and C3, that together image the solar corona from 1.1 to 30 R (C1: 1.1 – 3 R, C2: 1.5 – 6 R, and C3: 3.7 – 30 R). The C1 coronagraph is a newly developed mirror version of the classic internally-occulted Lyot coronagraph, while the C2 and C3 coronagraphs are externally occulted instruments. High-resolution imaging spectroscopy of the corona from 1.1 to 3 R can be performed with the Fabry-Perot interferometer in C1. High-volume memories and a high-speed microprocessor enable extensive on-board image processing. Image compression by a factor of about 10 will result in the transmission of 10 full images per hour.     

UV observations of macrospicules at the solar limb

During the Spacelab 2 mission, the NRL High Resolution Telescope and Spectrograph (HRTS) obtained a time-series of broad-band ultraviolet images of macrospicules at the solar limb inside a polar coronal hole with a temporal resolution of 20 and 60 s. The properties of the macrospicules observed in the Spacelab data are measured and compared with the properties reported for EUV macrospicules observed during Skylab (Bohlin et al., 1975; Withbroe et al., 1976). There is a general agreement between the data sets but several differences. Because of the higher temporal resolution of the Spacelab data, it is possible to see macrospicules with shorter lifetimes than seen during Skylab, as well as variations on faster timescales. The largest (30–60) and fastest (150 km s ^-1) macrospicules seen during Skylab were not found in the Spacelab observations. The Spacelab data support the conclusion that many macrospicules decay by simply fading away.     

The Heliospheric Imagers Onboard the STEREO Mission

Mounted on the sides of two widely separated spacecraft, the two Heliospheric Imager (HI) instruments onboard NASA’s STEREO mission view, for the first time, the space between the Sun and Earth. These instruments are wide-angle visible-light imagers that incorporate sufficient baffling to eliminate scattered light to the extent that the passage of solar coronal mass ejections (CMEs) through the heliosphere can be detected. Each HI instrument comprises two cameras, HI-1 and HI-2, which have 20° and 70° fields of view and are off-pointed from the Sun direction by 14.0° and 53.7°, respectively, with their optical axes aligned in the ecliptic plane. This arrangement provides coverage over solar elongation angles from 4.0° to 88.7° at the viewpoints of the two spacecraft, thereby allowing the observation of Earth-directed CMEs along the Sun?–?Earth line to the vicinity of the Earth and beyond. Given the two separated platforms, this also presents the first opportunity to view the structure and evolution of CMEs in three dimensions. The STEREO spacecraft were launched from Cape Canaveral Air Force Base in late October 2006, and the HI instruments have been performing scientific observations since early 2007. The design, development, manufacture, and calibration of these unique instruments are reviewed in this paper. Mission operations, including the initial commissioning phase and the science operations phase, are described. Data processing and analysis procedures are briefly discussed, and ground-test results and in-orbit observations are used to demonstrate that the performance of the instruments meets the original scientific requirements.     

POLAR investigation of the Sun—POLARIS

The POLAR Investigation of the Sun (POLARIS) mission uses a combination of a gravity assist and solar sail propulsion to place a spacecraft in a 0.48 AU circular orbit around the Sun with an inclination of 75° with respect to solar equator. This challenging orbit is made possible by the challenging development of solar sail propulsion. This first extended view of the high-latitude regions of the Sun will enable crucial observations not possible from the ecliptic viewpoint or from Solar Orbiter. While Solar Orbiter would give the first glimpse of the high latitude magnetic field and flows to probe the solar dynamo, it does not have sufficient viewing of the polar regions to achieve POLARIS’s primary objective: determining the relation between the magnetism and dynamics of the Sun’s polar regions and the solar cycle.

High-resolution Imaging of the Upper Solar Chromosphere: First Light Performance of the Very-high-Resolution Advanced ULtraviolet Telescope

The Very-high-resolution Advanced ULtraviolet Telescope (VAULT) experiment was successfully launched on 7 May 1999 on a Black Brant sounding rocket vehicle from White Sands Missile Range. The instrument consists of a 30 cm UV diffraction limited telescope followed by a two-grating, zero-dispersion spectroheliograph tuned to isolate the solar L emission line. During the flight, the instrument successfully obtained a series of images of the upper chromosphere with a limiting resolution of 0.33 arc sec. The resulting observations are the highest-resolution images of the solar atmosphere obtained from space to date. The flight demonstrated that sub-arc second ultraviolet images of the solar atmosphere are achievable with a high-quality, moderate-aperture space telescope and associated optics. Herein, we describe the payload and its in-flight performance.     

First Imaging of Coronal Mass Ejections in the Heliosphere Viewed from Outside the Sun – Earth Line

We show for the first time images of solar coronal mass ejections (CMEs) viewed using the Heliospheric Imager (HI) instrument aboard the NASA STEREO spacecraft. The HI instruments are wide-angle imaging systems designed to detect CMEs in the heliosphere, in particular, for the first time, observing the propagation of such events along the Sun – Earth line, that is, those directed towards Earth. At the time of writing the STEREO spacecraft are still close to the Earth and the full advantage of the HI dual-imaging has yet to be realised. However, even these early results show that despite severe technical challenges in their design and implementation, the HI instruments can successfully detect CMEs in the heliosphere, and this is an extremely important milestone for CME research. For the principal event being analysed here we demonstrate an ability to track a CME from the corona to over 40 degrees. The time – altitude history shows a constant speed of ascent over at least the first 50 solar radii and some evidence for deceleration at distances of over 20 degrees. Comparisons of associated coronagraph data and the HI images show that the basic structure of the CME remains clearly intact as it propagates from the corona into the heliosphere. Extracting the CME signal requires a consideration of the F-coronal intensity distribution, which can be identified from the HI data. Thus we present the preliminary results on this measured F-coronal intensity and compare these to the modelled F-corona of Koutchmy and Lamy (IAU Colloq. 85, 63, 1985). This analysis demonstrates that CME material some two orders of magnitude weaker than the F-corona can be detected; a specific example at 40 solar radii revealed CME intensities as low as 1.7×10⁻¹⁴ of the solar brightness. These observations herald a new era in CME research as we extend our capability for tracking, in particular, Earth-directed CMEs into the heliosphere.     

Eit and LASCO Observations of the Initiation of a Coronal Mass Ejection

We present the first observations of the initiation of a coronal mass ejection (CME) seen on the disk of the Sun. Observations with the EIT experiment on SOHO show that the CME began in a small volume and was initially associated with slow motions of prominence material and a small brightening at one end of the prominence. Shortly afterward, the prominence was accelerated to about 100 km s^-1 and was preceded by a bright loop-like structure, which surrounded an emission void, that traveled out into the corona at a velocity of 200–400 km s^-1. These three components, the prominence, the dark void, and the bright loops are typical of CMEs when seen at distance in the corona and here are shown to be present at the earliest stages of the CME. The event was later observed to traverse the LASCO coronagraphs fields of view from 1.1 to 30 R⊙. Of particular interest is the fact that this large-scale event, spanning as much as 70 deg in latitude, originated in a volume with dimensions of roughly 35" (2.5 x 10⁴ km). Further, a disturbance that propagated across the disk and a chain of activity near the limb may also be associated with this event as well as a considerable degree of activity near the west limb.     

Nonthermal Velocities in the Solar Transition Zone and Corona

Nonthermal velocities are presented for spectral lines covering the temperature range 10 4–10 6 K, measured from high-spectral-resolution data for several solar features observed at the limb by the high resolution telescope and spectrograph (HRTS), including a coronal hole, quiescent regions and several small-scale active regions. These results are compared with predictions based on acoustic waves and heating via Alfvén waves. It is likely that more than one mechanism is operating simultaneously, in particular, resonant Alfvén wave heating, which is very sensitive to background plasma motions.