Characteristics of spectral aerosol optical depths over India during ICARB

Spectral aerosol optical depth (AOD) measurements, carried out regularly from a network of observatories spread over the Indian mainland and adjoining islands in the Bay of Bengal and Arabian Sea, are used to examine the spatio-temporal and spectral variations during the period of ICARB (March to May 2006). The AODs and the derived Ångström parameters showed considerable variations across India during the above period. While at the southern peninsular stations the AODs decreased towards May after a peak in April, in the north Indian regions they increased continuously from March to May. The Ångström coefficients suggested enhanced coarse mode loading in the north Indian regions, compared to southern India. Nevertheless, as months progressed from March to May, the dominance of coarse mode aerosols increased in the columnar aerosol size spectrum over the entire Indian mainland, maintaining the regional distinctiveness. Compared to the above, the island stations showed considerably low AODs, so too the northeastern station Dibrugarh, indicating the prevalence of cleaner environment. Long-range transport of aerosols from tshe adjoining regions leads to remarkable changes in the magnitude of the AODs and their wavelength dependencies during March to May. HYSPLIT back-trajectory analysis shows that enhanced long-range transport of aerosols, particularly from the west Asia and northwest coastal India, contributed significantly to the enhancement of AOD and in the flattening of the spectra over entire regions; if it is the peninsular regions and the island Minicoy are more impacted in April, the north Indian regions including the Indo Gangetic Plain get affected the most during May, with the AODs soaring as high as 1.0 at 500 nm. Over the islands, the Ångström exponent (α) remained significantly lower (～1) over the Arabian Sea compared to Bay of Bengal (BoB) (～1.4) as revealed by the data respectively from Minicoy and Port Blair. Occurrences of higher values of α, showing dominance of accumulation mode aerosols, over BoB are associated well with the advection, above the boundary layer, of fine particles from the east Asian region during March and April. The change in the airmass to marine in May results in a rapid decrease in α over the BoB.     

Wave transmission and reflection characteristics of a rigid surface and submerged horizontal plate

The wave transmission and reflection characteristics of a rigidly fixed surface and submerged horizontal plate were investigated experimentally in detail for a wide range of incident wave steepnesses and for different depths of submerge of the plate in deep water conditions in regular water wave fields. The experiments were conducted at the Ocean Engineering Centre, Indian Institute of Technology, Madras, India, in a wave flume 10 m long, 0.3 m wide and in a constant water depth of 0.8 m. The horizontal plate is 0.22 m thick and 1.2 m in length, covering the enrire width of the flume. From the present investigation, it is found that for a rigid surface plate, the coefficient of transmission is a minimum and the coefficient of reflection is a maximum, but the maximum value of the coefficient of energy loss occurs for plates submerged closer to the still-water level (SWL) and not for the surface plate. It is also found that the value of the coefficient of reflection increases with the increase in the value of the Reddy-Neelamani (RN) number, the ratio of horizontal water particle excursion at the bottom of the plate in its absence to the length of the plate. The coefficient of transmission is found to decrease rapidly with increase in the value of RN number up to 0.1. The wave transmission is only 5% for RN from 0.1 to 0.2. It is also found that for RN number greater than 0.04, the minimum energy dissipation is consistently about 60% of the incident wave energy.     

Semisubmersible response to transient ice forces

The paper presents an analytical and experimental study on the transient response of semisubmersibles to bergybit impact and the strength of bergybit ice to high strain-rate loadings. Two approaches have been proposed for the solution of the semisubmersible-bergybit interaction problem, one using the energy approach and the other using the conventional structural dynamics approach with initial velocity conditions. In addition the local behaviour of the impacted regions have been analysed for deformation and failure. Numerical results have been given for local behaviour of an impacted column and global behaviour of semisubmersible-bergybit system. Experimental study has been reported on the impact strength of iceberg ice at strain rates of 10⁻³, 10⁻² and 10⁻¹; the indentation impact strength of ice is found to be 3–4 times the unaixial compressive strength, at the same strain rate.     

Subsurface dams to harvest rainwater— a case study of the Swarnamukhi River basin, Southern India

Declining water level trends and yields of wells, deterioration of groundwater quality and drying up of shallow wells are common in many parts of India. This is mainly attributed to the recurrence of drought years, over exploitation of groundwater, increase in the number of groundwater structures and explosion of population. In this subcontinent, the saving of water has to be done on the days it rains. India receives much of its rainfall in just 100 h in a year mostly during the monsoon period. If this water is not captured or stored, the rest of the year experiences a precarious situation manifest in water scarcity. The main objective behind the construction of subsurface dams in the Swarnamukhi River basin was to harvest the base flow infiltrating into sandy alluvium as waste to the sea and thereby to increase groundwater potential for meeting future water demands. An analysis of hydrographs of piezometers of four subsurface dams, monitored during October 2001–December 2002, reveals that there is an average rise of 1.44 m in post-monsoon and 1.80 m in the pre-monsoon period after the subsurface dams were constructed. Further, during the pre-monsoon month of June, much before construction of subsurface dams in October 2001, the water level was found fluctuating in the range of 3.1–10 m, in contrast to the fluctuation ranging from 0.4 to 3.1 m during the period following the construction of dams. Hence, the planning of rainwater harvesting structures entails thorough scientific investigations for identifying the most suitable locations for subsurface dams.     

Dleineation and characterization of geomorphological features in a part of lower maharahstra metamorphic plateau using IRS-ID LISS-III Data

In the present study, an attempt has been made to delineate and characterize the different geomorphic units of Tundiya river catchment in a part of Lower Maharahstra Metamorphic Plateau, north-eastern part of Nagpur district, Maharashtra. The drainage, contour and delineated geological units have been overlaid on IRS-ID LISS III satellite imagery (bands 2,3 and 4) in EASI/PACE analysis system to delineate and characterize different geomorphological units and analysis of their processes based on the field observations. The study area is basically of metamorphic in origin with different geological formations and is influenced by the various fluvio-morphological processes. Based on the satellite data analysis, the distinct geomorphological units viz., table top summits, structural hills, subdued plateau, linear ridges, shallow, moderate and deeply buried foot slopes, shallow valley fills and deep valley fills have been delineated and characterized. The information generated from satellite data in the form of vector layers has been used in GIS to generate geological and geomorphological maps of the study area. The present study demonstrates that IRS-ID LISS-III data in conjunction with geology, drainage and contour parameters to enable detailed evaluation of different geomorphological units and analysis of their processes based on the field observations. The delineated geomorphological units can be utilized for evaluation and management of natural resources and geo-environment on sustainable basis at river catchment level.     

Hydrometallurgical processing and recovery of molybdenum trioxide from spent catalyst

Hydrometallurgical processing of spent hydrodesulphurisation (HDS) catalyst for the recovery of molybdenum using sodium carbonate and hydrogen peroxide mixtures was investigated. The results indicated that the recovery of molybdenum was largely dependent on the concentrations of Na₂CO₃ and H₂O₂ in the reaction medium, which controls the acidity of the leach liquor and carry over of impurities such as Al, Ni, P, Si and V. Leaching process was exothermic and leaching efficiency of molybdenum decreased with increasing solid to liquid ratio. Large scale leaching of spent catalyst, under optimum conditions: 20% pulp density, 85 g/L Na₂CO₃, 10 vol.% H₂O₂ and 1 h reaction, resulted a leaching efficiency of 84% Mo. The obtained leach liquor contained (g/L): Mo — 22.0, Ni — 0.015 and Al — 0.82, P — 1.1, Si — 0.094 and minor quantities of V — 8 mg/L, As and Co — < 1 mg/L. Recovery of Mo from leach solution as MoO₃ of 97.30% purity was achieved by ammonium molybdate precipitation method.     

Stratigraphic status,age, and paleobathymetry of the Grey shale Member,Dalmiapuram Formation,Cauvery Basin,India

Grey shale Member of the Dalmiapuram Formation, Ariyalur Group, Cauvery Basin, India was studied for its stratigraphic position, age, and paleobathymetry with a re-look into the lithological relationship and foraminifer assemblages in the deepened limestone mine excavations at M/s Dalmia Cements, Dalmiapuram. Twenty grey shale samples from Kovandankurchchi (pit-4) and Kallakkudi mines yielded diversified calcareous, benthic, and rare index planktic foraminifera. The foraminiferal assemblages suggest a latest Albian age and middle neritic depositional conditions. The abundance of kaolinite and smectite clay minerals relate to warm/humid climate which corroborate with rising relative sea level during grey shale deposition. The grey shale occurs in patches within the marl bedded limestone member which exhibits cyclic deposition of limestone and marl. The limestone mine sections demonstrate that the grey shale forms part of basal marl bedded limestone, directly overlying the coral algal limestone. The present study demonstrates that the grey shale outcrops in Dalmiapuram Formation should be placed stratigraphically as part of marl bedded limestone. The member status for grey shale which is current usage stands discounted.     

Numerical simulation of sea and bay breezes in a weak shear environment

Summary A numerical mesoscale model (COAMPS) is used to study some of the features associated with the evolution of the kinematic, thermodynamic, and physical structure of the Alabama sea and bay breeze circulations and convections in weak shear environments based on five cases from Medlin and Croft (1998). The general and expected features and evolution of sea and bay breeze circulations are captured by the model simulations, including horizontal and vertical wind shifts, thermal contrast between land and water surface, vertical stability over water and land, return currents and moisture increase. The relationship of the circulations to specific synoptic flow regimes and local physiographic features was investigated. The sea breeze triggered convective cells are confirmed to have a preferred location according to the flow regime and local conditions. This result can assist the forecasters in understanding the anticipated convective cell initiation and development on a given day as related to sea and bay breeze cells as well as improve the short-term forecast accuracy of the location of thunderstorm initiation based on routine observations and subsequent convective activity. If local NWS office model a selective subset of cases then they can better visualize and forecast those cases operationally.     

Evaluation of turbulent fluxes over Maitri,Antarctica

Turbulent fluxes have been evaluated for clear sunny days over the Indian Antarctic station, Maitri, using the basic meteorological data recorded at four levels of a 28 m tower. The data are supplemented with radiation data. The surface layer over Maitri remains thermally stratified during the hours of minimum solar insolation, the so-called nighttime period. The surface winds during this period are generally very strong resulting in high momentum fluxes. In particular, for high winds (>12 m s^–1), the temperature gradient is found to be less positive than for moderate winds (4 to 7 m s^–1). Solar insolation provided the daytime heating necessary for the diurnal variation of atmospheric stability, and hence, for the turbulent fluxes. Thus, on clear days daytime conditions are marked by upward transport of heat with reduced momentum flux, while stable nighttime conditions are marked by a downward heat flux with increased momentum fluxes.     

Ensemble prediction of regional droughts using climate inputs and the SVM–copula approach

In this study, the climate teleconnections with meteorological droughts are analysed and used to develop ensemble drought prediction models using a support vector machine (SVM)–copula approach over Western Rajasthan (India). The meteorological droughts are identified using the Standardized Precipitation Index (SPI). In the analysis of large‐scale climate forcing represented by climate indices such as El Niño Southern Oscillation, Indian Ocean Dipole Mode and Atlantic Multidecadal Oscillation on regional droughts, it is found that regional droughts exhibits interannual as well as interdecadal variability. On the basis of potential teleconnections between regional droughts and climate indices, SPI‐based drought forecasting models are developed with up to 3 months' lead time. As traditional statistical forecast models are unable to capture nonlinearity and nonstationarity associated with drought forecasts, a machine learning technique, namely, support vector regression (SVR), is adopted to forecast the drought index, and the copula method is used to model the joint distribution of observed and predicted drought index. The copula‐based conditional distribution of an observed drought index conditioned on predicted drought index is utilized to simulate ensembles of drought forecasts. Two variants of drought forecast models are developed, namely a single model for all the periods in a year and separate models for each of the four seasons in a year. The performance of developed models is validated for predicting drought time series for 10 years' data. Improvement in ensemble prediction of drought indices is observed for combined seasonal model over the single model without seasonal partitions. The results show that the proposed SVM–copula approach improves the drought prediction capability and provides estimation of uncertainty associated with drought predictions. Copyright © 2013 John Wiley & Sons, Ltd.