The supergene origin of ruthenian hexaferrum in Ni‐laterites

For two decades, the nature of Fe‐rich, oxygen‐bearing, Ru–Os compounds found in the supergene environment has been debated. Ru–Os–Fe‐oxides and nano‐intergrowths of ruthenium with magnetite have been proposed. We applied FE‐SEM, EMPA, μ‐Raman spectroscopy and synchrotron tts‐μXRD to Ru–Os–Fe compounds recovered from Ni‐laterites from the Dominican Republic. The results demonstrate that a significant portion of Fe exists in a common structure with the Ru–Os alloy, that is, ruthenian hexaferrum. This mineral occurs both as nanoparticles and as micrometric patches within a matrix of Fe‐oxide(s). Our data suggest that supergene ruthenian hexaferrum with a (Ru_0.4(Os,Ir)_0.1Fe_0.5)_?1.0 stoichiometry represents the most advanced weathering product of primary laurite within Ni‐laterites from the Dominican Republic.     

Vorticity and intermittency within the pre-breaking region of spilling breakers

This paper presents measurements and analysis of fluid velocity within the context of spilling waves. The data have been collected using 2-D Laser Doppler Velocimetry in pre-breaking monochromatic waves generated in a wave tank. The analysis is performed using orthogonal wavelets and, in addition to the classical criterion adopted in applying Taylor's hypothesis, a new algorithm is proposed for the eduction of eddies at different length scales. The contribution of different scale vortices is computed, and phase is resolved. Microvortices (smaller than the breaker height but larger than the dissipative vortices) and mid-size vortices (with length ranging from the breaker height to the wave length) carry out most turbulence energy under wave crest. The phase average vorticity and strain rate is computed at different wave lengths, with the analysis of intermittence. The intermittency factor shows spikes in the wave crest, especially for turbulence in small vortices.     

A depth average SPH model including μ(I) rheology and crushing for rock avalanches

Classical depth-integrated smoothed particle hydrodynamics (SPH) models for avalanches are extended in the present work to include a μ(I)− rheological model enriched with a fragmentation law. With this improvement, the basal friction becomes grain distribution dependent. Rock avalanches, where grain distribution tends to change with time while propagating, are the appropriate type of landslide to apply the new numerical proposal. The μ(I)− rheological models considered in the present work are those of Hatano and Gray, combined with two different fragmentation laws, a hyperbolic and a fractal-based law. As an application, Frank avalanche, which took place in Canada in 1903, is analyzed under the scope of the present approach, focusing in the influence of the rheological and fragmentation laws in the evolution of the avalanche.     

Theory of plastic mechanism control for MRF–CBF dual systems and its validation

In this paper the theory of plastic mechanism control is presented for moment resisting frame–concentrically braced frames dual systems, i.e. for structural systems combined by moment resisting frames and concentrically braced frames. It is aimed at the design of structures failing in global mode, i.e. whose collapse mechanism is characterised by the yielding of all the tensile diagonals and the occurrence of buckling in the compressed ones, and by plastic hinge formation at all the beam ends and at the base of first storey columns. The proposed methodology is based on the application of the kinematic theorem of plastic collapse, by imposing that the global mechanism equilibrium curve has to lie below all the other equilibrium curves corresponding to undesired mechanisms. The practical application of the design methodology is illustrated by means of a worked example. In addition, the results of a non-linear static pushover and dynamic analyses of the designed structure are also discussed in order to demonstrate the effectiveness of the proposed design procedure.     

Exploratory seismic site response surveys in a complex geologic area: a case study from Mt. Etna volcano (southern Italy)

A preliminary study targeting to evaluate the local seismic response was performed in the eastern flank of Mt. Etna (southern Italy) using ambient noise measurements. The obtained spectral ratios were subdivided through cluster analysis into different classes of fundamental frequency permitting to draw an iso-frequency contour map. The analysis set into evidence the extreme heterogeneity of lava sequences, which makes difficult to identify a single seismic bedrock formation. Another important outcome, concerning the local seismic effects in terms of frequency and azimuth, is the important role played by the fracture fields associated with the main structural systems of the area. The existence of two zones with strong directional effects striking WNW–ESE and NW–SE, nearly orthogonal to the orientation of the main fracture fields, corroborate such hypothesis.     

Vent conditions for expected eruptions at Vesuvius

Determining consistent sets of vent conditions for next expected eruptions at Vesuvius is crucial for the simulation of the sub-aerial processes originating the volcanic hazard and the eruption impact. Here we refer to the expected eruptive scales and conditions defined in the frame of the EC Exploris project, and simulate the dynamics of magma ascent along the volcanic conduit for sub-steady phases of next eruptions characterized by intensities of the Violent Strombolian (VS), Sub-Plinian 2 (SP2), and Sub-Plinian 1 (SP1) scale. Sets of conditions for the simulations are determined on the basis of the bulk of knowledge on the past history of Vesuvius [Cioni, R., Bertagnini, A., Santacroce, R., Andronico, D., Explosive activity and eruption scenarios at Somma–Vesuvius (Italy): towards a new classification scheme. Journal of Volcanology and Geothermal Research, this issue.]. Volatile contents (H₂O and CO₂) are parameterized in order to account for the uncertainty in their expected amounts for a next eruption. In all cases the flow in the conduit is found to be choked, with velocities at the conduit exit or vent corresponding to the sonic velocity in the two-phase non-equilibrium magmatic mixture. Conduit diameters and vent mixture densities are found to display minimum overlapping between the different eruptive scales, while exit gas and particle velocities, as well as vent pressures, largely overlap. Vent diameters vary from as low as about 5 m for VS eruptions, to 35–55 m for the most violent SP1 eruption scale. Vent pressures can be as low as less than 1 MPa for the lowest volatile content employed of 2 wt.% H₂O and no CO₂, to 7–8 MPa for highest volatile contents of 5 wt.% H₂O and 2 wt.% CO₂ and large eruptive scales. Gas and particle velocities at the vent range from 100–250 m/s, with a tendency to decrease, and to increase the mechanical decoupling between the phases, with increasing eruptive scale. Except for velocities, all relevant vent quantities are more sensitive to the volatile content of the discharged magma for the highest eruptive scales considered.     

Evidence of a phase shift to Epizoanthus gabrieli Carlgreen, 1951 (Order Zoanthidea) and loss of coral cover on reefs in the Southwest Atlantic

There is at present a ‘coral reef crisis’; one of the more drastic consequences of this is a phase shift, in which reef‐building corals are replaced by non‐reef building benthos such as macroalgae and soft corals. Previous studies have principally focused on the shift to macroalgae. Our goal was to investigate whether the dominance of the zoanthid Epizoanthus gabrieli on some reefs of Todos os Santos Bay, Brazil, represented a non‐algal phase shift. In 2003, we identified a high cover of this species on two reefs (52% and 70%), but only in 2007 was it possible to confirm a reduction in coral cover. This dominance has persisted for over 9 years, characterizing a true phase shift. This loss of coral cover may be a result of anthropogenic disturbances within the bay; however, given the large number of human impacts, further studies are needed to identify specific causes of this shift. Although there are some reports of phase shift involving species pertaining to the Class Anthozoa, this is the first report of this phenomenon involving the order Zoanthidea.     

Major-ion bulk deposition around an active volcano (Mt. Etna, Italy)

Bulk atmospheric deposition of major cations (Na, K, Ca, Mg) and anions (Cl, F, SO₄) were measured at 15 sites around an active volcano, Mount Etna, from 2001 to 2003. Their composition indicates several natural sources, among which deposition of plume-derived volcanogenic gas compounds is prevalent for F, Cl and S. Plume-derived acidic compounds are also responsible for the prevailing acidic composition of the samples collected on the summit of the volcano (pH in the 2.45–5.57 range). Cation species have complex origin, including deposition of plume volcanogenic ash and aerosols and soil-dust wind re-suspension of either volcanic or carbonate sedimentary rocks. Variation of the deposition rates during the March 2001–March 2003 period, coupled with previous measurements from 1997 to 2000 (Appl Geochem 16:985–1000, 2001), were compared with the variation of SO₂ flux, volcanic activity and rainfall. The deposition rate was mainly controlled by rainfall. Commonly, about 0.1–0.9% of HF, HCl and SO₂ emitted by the summit crater's plume were deposited around the volcano. We estimate that ∼2 Gg of volcanogenic sulphur were deposited over the Etnean area during the 2002–2003 flank eruption, at an average rate of ∼24 Mg day⁻¹ which is two orders of magnitude higher than that typical of quiescent degassing phases.