Experimental solidification of anhydrous latitic and trachytic melts at different cooling rates: The role of nucleation kinetics

Two sets of cooling experiments were run at atmospheric conditions for two anhydrous starting latitic and trachytic melts: 1) five cooling rates (25, 12.5, 3, 0.5, and 0.125 °C/min) between 1300° and 800 °C, and 2) a 0.5 °C/min cooling rate from 1300 °C with quench temperatures at 1200°, 1100°, 1000° and 900 °C. Trachytic run-products are invariably glassy. Nucleation is also suppressed in the latitic run-products at the three highest cooling rates. Conversely, in the 0.5 and 0.125 °C/min runs, latites have a crystal content of  90 vol.%. The phases are: plagioclase, clinopyroxene, glass and iron-bearing oxide (in order of abundance). The variable quench temperatures, investigated by coupling experiments with Pt wire and Pt capsule sample containers in set 2, again did not produce crystallization of trachyte, whereas latitic samples are characterized by  10 vol.% of oxides, pyroxenes and plagioclase (in order of appearance), at temperature < 1000 °C. Effects of (preferential) heterogeneous nucleation on sample holders, of superheating degree, and chemical species loss during cooling are absent for both melt compositions. The difference of solidification paths between these two silicate melts can be ascribed only to their small chemical differences. In comparison with calculated equilibrium conditions all the experimental latitic and trachytic run-products revealed strong kinetic effects, interpretable in the light of the nucleation theory. The glass-forming ability (GFA) of trachyte is higher, whereas their critical cooling rate (Rc) is lower (< 0.125 °C/min), in comparison to latitic melts (Rc > 0.5 °C/min). The experimental results carried out in this study can be applied to lava flows and domes; trachytic lavas are able to flow for longer period with respect to latitic ones in a metastable condition. Glass-rich terrestrial lavas, i.e. obsidians, can be the result of sluggish nucleation kinetics due to the relative high polymerisation of evolved silicate melts.     

The Estimation of Secondary Production of the Marine Bivalve Spisula subtruncata (DA COSTA) in the Area of the Po River Delta

Abstract. The secondary production of Spisula subtruncata (somatic production) is calculated in the framework of a benthic monitoring study in a coastal area. The temporal trends of density, biomass and growth increments are examined in the three year-classes present. These are compared to certain physical and chemical parameters.     

Anatomy of shelf deltas at the edge of a prograding Eocene shelf margin, Spitsbergen

Abstract Although shelf‐edge deltas are well‐imaged seismic features of Holocene and Pleistocene shelf margins, documented outcrop analogues of these important sand‐prone reservoirs are rare. The facies and stratigraphic architecture of an outcropping shelf‐edge delta system in the Eocene Battfjellet Formation, Spitsbergen, is presented here, as well as the implications of this delta system for the generation of sand‐prone, shelf‐margin clinoforms. The shelf‐edge deltas of the Battfjellet Formation on Litledalsfjellet and Høgsnyta produced a 3–5 × 15 km, shelf edge‐attached, slope apron (70 m of sandstones proximally, tapering to zero on the lower slope). The slope apron consists of distributary channel and mouth‐bar deposits in its shelf‐edge reaches, passing downslope to slope channels/chutes that fed turbiditic lobes and spillover sheets. In the transgressive phase of the slope apron, estuaries developed at the shelf edge, and these also produced minor lobes on the slope. The short‐headed mountainous rivers that drained the adjacent orogenic belt and fed the narrow shelf, and the shelf‐edge position of the discharging deltas, made an appropriate setting for the generation of hyperpycnal turbidity currents on the slope of the shelf margin. The abundance of organic matter and of coal fragments in the slope turbidites is consistent with this notion. Evidence that many of the slope turbidites were generated by sustained turbidity currents that waxed then waned includes the presence of scour surfaces and thick intervals of plane‐parallel laminae within turbidite beds in the slope channels, and thick spillover lobes with repetitive alternations of massive and flat‐laminated intervals. The examined shelf‐edge to slope system, now preserved mainly below the shelf break and dominated by sediment gravity‐flow deposits, has a threefold stratigraphic architecture: a lower, progradational part, in which the clinoforms have a slight downward‐directed trajectory; a thin aggradational zone; and an upper part in which clinoforms backstep up onto the shelf edge. A greatly increased density of erosional channels and chutes marks the regressive‐to‐transgressive turnaround within the slope apron, and this zone becomes an angular unconformity up near the shelf edge. This unconformity, with both subaerial and subaqueous components, is interpreted as a sequence boundary and developed by vigorous sand delivery and bypass across the shelf edge during the time interval of falling relative sea level. The studied shelf‐margin clinoforms accreted mostly during falling stage (sea level below the shelf edge), but the outer shelf later became estuarine as sea level became re‐established above the shelf edge.     

A late Early Pleistocene pollen record from Fontana Ranuccio (central Italy)

A pollen record from a sediment core drilled underneath the Acheulian site of Fontana Ranuccio provides new data on the vegetation characters in central Italy during the late Early Pleistocene, in a forest phase possibly corresponding to a substage of Marine Isotope Stage 21. A number of tree taxa nowadays extinct in Europe (Cathaya, Tsuga, Taxodium type, Carya and Pterocarya) are present at Fontana Ranuccio in a temperate phase characterised by dense forest conditions, dominated by Alnus and Pterocarya. The comparison of the Fontana Ranuccio record with other dated sites distributed along the Italian peninsula indicates that the floristic and vegetational characters of the Mid Pleistocene revolution present a rather distinct succession of biostratigraphic events. Compared to other Early Pleistocene pollen records from southern Europe, the Italian Peninsula shows greater floristic similarities with the Eastern Mediterranean regions than with the Iberian Peninsula. Copyright © 2011 John Wiley & Sons, Ltd.     

Tsunamis generated by landslides at the coast of conical islands: experimental benchmark dataset for mathematical model validation

This paper presents a new experimental campaign aimed at reproducing tsunamis generated by landslides at the flank of conical islands. In order to describe in high details the wave field around the island a special acquisition system, which consists of both fixed and movable wave gauges, has been employed. Indeed, each experiment has been repeated several times by changing the configuration of the movable gauges, then obtaining a single virtual experiment with high spatial resolution measurements. Fixed run-up gauges measure the waves at fixed locations to statistically quantify the repeatability of the experiments. Selected experimental results are illustrated within the paper that is mainly aimed at defining a benchmark dataset, available on request, for the development/calibration/validation of analytical and numerical models of tsunamis generated by landslides.     

Detection and mapping of bracken fern weeds using multispectral remotely sensed data: a review of progress and challenges

Bracken fern is one of the major invasive plants distributed all over the world currently threatening socio-economic and ecological systems due to its ability to swiftly colonize landscapes. The study aimed at reviewing the progress and challenges in detecting and mapping of bracken fern weeds using different remote sensing techniques. Evidence from literature have revealed that traditional methods such as field surveys and modelling have been insufficient in detecting and mapping the spatial distribution of bracken fern at a regional scale. The applications of medium spatial resolution sensors have been constrained by their limited spatial, spectral and radiometric capabilities in detecting and mapping bracken fern. On the other hand, the availability of most of these data-sets free of charge, large swath width and their high temporal resolution have significantly improved remote sensing of bracken fern. The use of commercial satellite data with high resolution have also proven useful in providing fine spectral and spatial resolution capabilities that are primarily essential to offer precise and reliable data on the spatial distribution of invasive species. However, the application of these data-sets is largely restricted to smaller areas, due to high costs and huge data volumes. Studies on bracken fern classification have extensively adopted traditional classification methods such as supervised maximum likelihood classifier. In studies where traditional methods performed poorly, the combination of soft classifiers such as super resolution analysis and traditional methods of classification have shown an improvement in bracken fern classification. Finally, since high spatial resolution sensors are expensive to acquire and have small swath width, the current study recommends that future research can also consider investigating the utility of the freely available recently launched sensors with a global footprint that has the potential to provide invaluable information for repeated measurement of invasive species over time and space.     

Impacts of Wildlife on Agriculture: A Spatial-Based Analysis and Economic Assessment for Reducing Damage

Over the last few years, the impacts of wildlife on agriculture have constantly been growing, in particular in areas close to woodland and in hunting ban zones (“refuge effect”). Public administrations have difficulty in meeting the growing requests for crop damage compensation. The development of appropriate measures to control this trend—starting from the understanding of the dynamics concerned—is crucial. The aim of this study was, therefore, to analyze damage at regional scale and define common local actions. In particular, the study involved different steps that define a spatial-based classification of risk levels, integrating statistical methods (principal component analysis and receiver operating characteristic) with multi-criteria evaluation (MCE) in a geographic information system (GIS). It turns out that, in the study area, the very high-risk zones affect 8.83% of used agricultural areas; about 97% of them concentrated in the first 400 m from the most suitable habitats. A selected cluster of 11 test areas within these zones allowed us to assess the cost-effectiveness of integrated prevention and control actions (IPCA) with respect to the compensation of the damage. The analysis shows cost of IPCA to be nearly twice the actual cost incurred by the public administration to compensate partially the damage. The comparison with the estimated damage shows the overall economic convenience of the proposed investment with significant differences depending on the areas. Thus, we suggest reaching an “agro-ecological” balance starting from actions on specific areas; if they produce the desired effects, they could be progressively extended to other areas with gradual investments (adaptive management).

     

Multi-criteria Evaluation of Bran Use to Promote Circularity in the Cereal Production Chain

Natural Resources Research - A reliable and realistic subsurface resource spatial modeling is a common and critical task for geosciences projects (mining, petroleum and environmental) because the...