A multiscale work-analysis approach for geotechnical structures

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.     

Potential of the VLTI for linking stellar frames to ICRF

The question of positioning the optical counterparts of the ICRF quasars is outlined in the perspective of future space astrometry missions, which ultimately will bring a new realization of the ICRS in the optical range. Ground-based interferometry with a dual-field observing mode (PRIMA/VLTI),together with the missions DIVA and FAME, will have a key role in building an extragalactic reference frame in the optical/near-IR range with about the same accuracy as that of the present (VLBI) primary frame. This revised version was published online in July 2006 with corrections to the Cover Date.     

Beam Mode Expansion of Corrugated Conical Horns with Phase Correcting Lens: Application to Radioastronomy Receivers

A classical radioastronomy receiver is fed with a corrugated horn and an independent lens, both placed in a cryostat to lower the noise temperature. The beam is focused and directed using a combination of elliptical and plane mirrors. This paper proposes modifying the initial feeding system by placing the lens onto the horn aperture, thereby allowing a size reduction of the horn and lens, and a simplification of their mechanical design. The profiled lens is shaped to correct the phase error on the horn aperture. A quasi-optical model of the horn-plus-lens system has been developed using a Beam Mode Expansion (BME). Results using both a hyperbolic-planar lens and a spherical-elliptical lens, as well as results obtained by using Geometrical Optics (GO) with a Kirchoff–Huygens integration to get the far-field pattern, have been compared with measurements. As a direct application, a full focusing system for the new 40-m radiotelescope at the “Centro Astronómico de Yebes” is presented for the 22, 30 and 45 GHz bands. This paper has developed a QO model for a corrugated conical horn with a phase-correcting lens. This revised version was published online in July 2006 with corrections to the Cover Date.     

Deceleration in the Earth's rotation due to the Sun

Summary The estimate of the tidal long-term decrease in the angular velocity of the Earth's rotation due to the Sun is given as –(0.8±0.3)×10 ^–22 rad s ^–2. It was computed on the basis of the observed total long-term decrease in , of the observed tidal deceleration of the Moon and the observed decrease in the second-degree zonal Stokes geopotential harmonic term. Adopting the estimate given, the product of the Love number and the tidal phase lag angle due to the Sun (in degrees) comes out as 0.53±0.20.

---

am a z nuuu u z mu au u, az : –(0,8±0,3) 10 ^–22 a¶rt; ^–2 . ¶rt; ua n a¶rt;a u , n a¶rt;a nuu u ¶rt;z ¶rt;uu u n a¶rt;a u mz az znmuaz naama ma. u num n au, m nu¶rt;u ua a a z u ( za¶rt;a) a z nuua a (0,53±0,20).

     

Tidal contribution of the satellites to removing the angular momentum of Jupiter

Summary It has been shown that dynamically, on the basis of the distribution of angular momenta, the Jovian system cannot be considered an analogue within the Solar system. The total tidal decrease in the angular momentum of Jupiter and in its angular velocity of rotation have been estimated, as well as the loss of mechanical energy due to tidal dissipation. It has been concluded that there are no dynamical contradictions with the hypothesis of the common cosmogonic origin of Jupiter and of its eight close satellites.

---

aam, m ¶rt;uauu, n an¶rt;u m uma ¶rt;uu, um numa umam aayu um. a a y au ma uma ¶rt;uu numa u z mu z au u—a nuuz mu, ma a nmu au yuu um u—a ¶rt;uunauu. a au, m m ¶rt;uauu azau zunm m zuu aaa numa u z uau u nmu.

     

Combined mine tremors source location and error evaluation in the Lubin Copper Mine (Poland)

A modified method of mine tremors location used in Lubin Copper Mine is presented in the paper. In mines where an intensive exploration is carried out a high accuracy source location technique is usually required. The effect of the flatness of the geophones array, complex geological structure of the rock mass and intense exploitation make the location results ambiguous in such mines. In the present paper an effective method of source location and location's error evaluations are presented, combining data from two different arrays of geophones. The first consists of uniaxial geophones spaced in the whole mine area. The second is installed in one of the mining panels and consists of triaxial geophones. The usage of the data obtained from triaxial geophones allows to increase the hypocenter vertical coordinate precision. The presented two-step location procedure combines standard location methods: P-waves directions and P-waves arrival times. Using computer simulations the efficiency of the created algorithm was tested. The designed algorithm is fully non-linear and was tested on the multilayered rock mass model of the Lubin Copper Mine, showing a computational better efficiency than the traditional P-wave arrival times location algorithm. In this paper we present the complete procedure that effectively solves the non-linear location problems, i.e. the mine tremor location and measurement of the error propagation.     

The landslides threatening Tasova town (Central Anatolia, Turkey) and their environmental impacts

There exist a number of landslides along the north Anatolian fault zone (NAFZ) between Tasova and Alparslan in Amasya province in Turkey. These landslides extending over an area of 2.5 × 6.0 km are triggered by steepening of slopes due to undercutting by the Yesilirmak River and groundwater fluctuations. The landslides have affected 30 buildings in the western part of Tasova. In this study, in order to investigate the engineering geological characteristics of the landslides and their environmental impacts, representative samples from geological units were collected and a total of six boreholes were drilled. Plastic pipes were installed into the boreholes to measure the groundwater fluctuations and to determine the position of the sliding surface. For a two-year monitoring period, using a GPS linked to a fixed station system, the magnitude of the movements ranged between 11.7 and 17.6 cm at the toe of landslide. The landslides that occurred in the study area were in the form of retrogressive circular and multiple circular failures. The factor of safety along a number of cross-sections calculated by the limit-equilibrium method of analysis is 0.96 in static condition. After further analyses, construction of a toe buttress with surface drainage may be suggested as a remedial measure to minimize the effects of these landslides.     

Assessment of sandstone deterioration at Ta Keo temple (Angkor): first results and future prospects

A first application of geomorphological methods to the assessment of sandstone deterioration at Angkor is presented. Damage diagnosis was carried out on the first eastern tier of the central pyramid of the 1,000 year-old Ta Keo temple. Methods combine field observations and measurements at 230 sampling points, high-resolution lasergrammetry and stereophotogrammetry on a 2-m² test zone, and SEM observations. The first results indicate that decay operates through a synergistic combination of weathering phenomena dominated by scaling and solution, and exhibits a high spatial variability. Percentages of deteriorated surfaces vary from 17.6 to 93.8%, and average stone recession values from 0.00 to 2.71 cm (minimum) and 0.34 to 5.49 cm (maximum). On the test-zone, stereophotogrammetry and 3D-mapping of the present and reconstructed initial states using lasergrammetry indicate that erosion scars up to 6 cm deep have formed since 1963. On the whole, the amount of deteriorated surfaces more than tripled between 1963 and 2008. The degree of implication of salts in stone decay remains unclear for most efflorescences are composed of calcite (CaCO3), with secondary importance of barite (BaSO4) and gypsum (CaSO₄·2H₂O). Future prospects aim to evaluate the impact on stone decay of the clearing out of the temple from the forest in the 1920s.     

Upwelling, species, and depth effects on coral skeletal cadmium-to-calcium ratios (Cd/Ca)

Skeletal cadmium-to-calcium (Cd/Ca) ratios in hermatypic stony corals have been used to reconstruct changes in upwelling over time, yet there has not been a systematic evaluation of this tracer’s natural variability within and among coral species, between depths and across environmental conditions. Here, coral skeletal Cd/Ca ratios were measured in multiple colonies of Pavona clavus, Pavona gigantea and Porites lobata reared at two depths (1 and 7 m) during both upwelling and nonupwelling intervals in the Gulf of Panama (Pacific). Overall, skeletal Cd/Ca ratios were significantly higher during upwelling than during nonupwelling, in shallow than in deep corals, and in both species of Pavona than in P. lobata. P. lobata skeletal Cd/Ca ratios were uniformly low compared to those in the other species, with no significant differences between upwelling and nonupwelling values. Among colonies of the same species, skeletal Cd/Ca ratios were always higher in all shallow P. gigantea colonies during upwelling compared to nonupwelling, though the magnitude of the increase varied among colonies. For P. lobata, P. clavus and deep P. gigantea, changes in skeletal Cd/Ca ratios were not consistent among all colonies, with some colonies having lower ratios during upwelling than during nonupwelling. No statistically significant relationships were found between skeletal Cd/Ca ratios and maximum linear skeletal extension, δ¹³C or δ¹⁸O, suggesting that at seasonal resolution the Cd/Ca signal was decoupled from growth rate, coral metabolism, and ocean temperature and salinity, respectively. These results led to the following conclusions, (1) coral skeletal Cd/Ca ratios are independent of skeletal extension, coral metabolism and ambient temperature/salinity, (2) shallow P. gigantea is the most reliable species for paleoupwelling reconstruction and (3) the average Cd/Ca record of several colonies, rather than of a single coral, is needed to reliably reconstruct paleoupwelling events.