Short-term temperature and salinity variations in the Tsushima Strait in 2004: Behavior of the surface low-salinity water in the strait

Temporal variations in temperature and salinity observed in 2004 were investigated on a short time scale in the Tsushima Strait. The data were obtained by long-term in situ measurements at Mitsushima and Futaoi Island using an instrument equipped with a piston-type wiper to avoid biofouling. In addition, the temperature and salinity values of the surface layer obtained by a commercial ferryboat between Hakata and Busan were used to investigate their spatiotemporal variations. Temperature and salinity variations with a time scale of several days had a negative correlation in the summer. This evidence suggests that a warm and less saline water mass, which is considered to be mainly the Changjiang Diluted Water (CDW), flowed intermittently through the Tsushima Strait in summer. In late July 2004, a large low-salinity water mass was detected in the Tsushima Strait. At that time, the freshwater transport through the Tsushima Strait transiently reached about 12 × 10⁴ m³s⁻¹, which is estimated from observed acoustic Doppler current profiler (ADCP) data along a ferryboat line and inferred salinity profiles. This estimated value is more than double the maximum of the climatological monthly mean of the Changjiang discharge. Furthermore, salinity and surface current data obtained by high frequency ocean radar (HF radar) indicate that water properties at Mitsushima may occasionally represent part of the water flowing through the western channel via a countercurrent, although Mitsushima is geographically located in the eastern channel.     

Displaced dolomites in radiolarian cherts of the Chichibu Belt on Shikoku Island,Southwest Japan

The northern tract of the Chichibu Belt on Shikoku Island, Southwest Japan, in places contains dolomites of Late Carboniferous age displaced into radiolarian cherts. The sections here examined are along the Niyodo gorge, central Shikoku. The sequence begins with thinly interbedded dolomitized radiolarian cherts and dolomites with a small amount of dolomitized radiolarian claystone and calcisiltite beds. These rocks, 5–10 m thick, are succeeded by a thick section of bedded and massive dolomites, commonly 40–50 m thick, which have thin intercalations of radiolarian claystone in the upper part. This dolomite sequence is depositionally overlain by a sequence, up to 50 m thick, comprising thinly interbedded radiolarian cherts and claystones, which, in turn, contain lenticular bodies of dolomite.Thin-section examination reveals that most of dolomites of the area have an arenitic or lithic texture, and should be termed doloarenite and dololithite. This means that dolomites are detrital. All lines of evidence suggest that the dolomites were not formed in the same depositional site in which the radiolarian cherts were being accumulated, but formed instead as allochthonous bodies which were displaced into a deep oceanic basin of chert deposition.The following sequence of events is postulated: (1) deposition of shallow-water calcareous sediments in a subtidal area; (2) dolomitization in a very shallow-water to supratidal environment; (3) displacement of dolomitized sediments, possibly mainly as debris flows into a deep-water, truely pelagic realm, in which siliceous radiolarian sediments were accumulating; (4) continued accumulation of siliceous sediments after the major influx of dolomitized sediments; and (5) minor influxes of dolomitized sediments during the continuous accumulation of siliceous sediments.     

Triassic mid-oceanic sedimentation in Panthalassa Ocean: Sambosan accretionary complex, Japan

Abstract   The Sambosan accretionary complex of southwest Japan was formed during the uppermost Jurassic to lowermost Cretaceous and consists of basaltic rocks, carbonates and siliceous rocks. The Sambosan oceanic rocks were grouped into four stratigraphic successions: (i) Middle Upper Triassic basaltic rock; (ii) Upper Triassic shallow-water limestone; (iii) limestone breccia; and (iv) Middle Middle Triassic to lower Upper Jurassic siliceous rock successions. The basaltic rocks have a geochemical affinity with oceanic island basalt of a normal hotspot origin. The shallow-water limestone, limestone breccia, and siliceous rock successions are interpreted to be sediments on the seamount-top, upper seamount-flank and surrounding ocean floor, respectively. Deposition of the radiolarian chert of the siliceous rock succession took place on the ocean floor in Late Anisian and continued until Middle Jurassic. Oceanic island basalt was erupted to form a seamount by an intraplate volcanism in Late Carnian. Late Triassic shallow-water carbonate sedimentation occurred at the top of this seamount. Accumulation of the radiolarian chert was temporally replaced by Late Carnian to Early Norian deep-water pelagic carbonate sedimentation. Biotic association and lithologic properties of the pelagic carbonates suggest that an enormous production and accumulation of calcareous planktonic biotas occurred in an open-ocean realm of the Panthalassa Ocean in Late Carnian through Early Norian. Upper Norian ribbon chert of the siliceous rock succession contains thin beds of limestone breccia displaced from the shallow-water buildup resting upon the seamount. The shallow-water limestone and siliceous rock successions are nearly coeval with one another and are laterally linked by displaced carbonates in the siliceous rock succession.     

A multi-proxy reconstruction of spatial and temporal variations in Asian summer temperatures over the last millennium

To investigate climate variability in Asia during the last millennium, the spatial and temporal evolution of summer (June–July–August; JJA) temperature in eastern and south-central Asia is reconstructed using multi-proxy records and the regularized expectation maximization (RegEM) algorithm with truncated total least squares (TTLS), under a point-by-point regression (PPR) framework. The temperature index reconstructions show that the late 20th century was the warmest period in Asia over the past millennium. The temperature field reconstructions illustrate that temperatures in central, eastern, and southern China during the 11th and 13th centuries, and in western Asia during the 12th century, were significantly higher than those in other regions, and comparable to levels in the 20th century. Except for the most recent warming, all identified warm events showed distinct regional expressions and none were uniform over the entire reconstruction area. The main finding of the study is that spatial temperature patterns have, on centennial time-scales, varied greatly over the last millennium. Moreover, seven climate model simulations, from the Coupled Model Intercomparison Project Phase 5 (CMIP5), over the same region of Asia, are all consistent with the temperature index reconstruction at the 99 % confidence level. Only spatial temperature patterns extracted as the first empirical orthogonal function (EOF) from the GISS-E2-R and MPI-ESM-P model simulations are significant and consistent with the temperature field reconstruction over the past millennium in Asia at the 90 % confidence level. This indicates that both the reconstruction and the simulations depict the temporal climate variability well over the past millennium. However, the spatial simulation or reconstruction capability of climate variability over the past millennium could be still limited. For reconstruction, some grid points do not pass validation tests and reveal the need for more proxies with high temporal resolution, accurate dating, and sensitive temperature signals, especially in central Asia and before AD 1400.     

Synthesis of highly dense and fine-grained aggregates of mantle composites by vacuum sintering of nano-sized mineral powders

Synthesized mineral powders with particle size of <100 nm are vacuum sintered to obtain highly dense and fine-grained polycrystalline mantle composites: single phase aggregates of forsterite (iron-free), olivine (iron containing), enstatite and diopside; two-phase composites of forsterite + spinel and forsterite + periclase; and, three-phase composites of forsterite + enstatite + diopside. Nano-sized powders of colloidal SiO₂ and highly dispersed Mg(OH)₂ with particle size of ≤50 nm are used as chemical sources for MgO and SiO₂, which are common components for all of the aggregates. These powders are mixed with powders of CaCO₃, MgAl₂O_4, and Fe(CO₂CH₃)₂ to introduce mineral phases of diopside, spinel, and olivine to the aggregates, respectively. To synthesize highly dense composites through pressureless sintering, we find that calcined powders should be composed of particles that have: (1) fully or partially reacted to the desired minerals, (2) a size of <100 nm and (3) less propensity to coalesce. Such calcined powders are cold isostatically pressed and then vacuum sintered. The temperature and duration of the sintering process are tuned to achieve a balance between high density and fine grain size. Highly dense (i.e., porosity ≤1 vol%) polycrystalline mantle mineral composites with grain size of 0.3–1.1 μm are successfully synthesized with this method.     

Tree-ring reconstructed summer temperature anomalies for temperate East Asia since 800 C.E.

We develop a summer temperature reconstruction for temperate East Asia based on a network of annual tree-ring chronologies covering the period 800–1989 C.E. The East Asia reconstruction is the regional average of 585 individual grid point summer temperature reconstructions produced using an ensemble version of point-by-point regression. Statistical calibration and validation tests indicate that the regional average possesses sufficient overall skill to allow it to be used to study the causes of temperature variability and change over the region. The reconstruction suggests a moderately warm early medieval epoch (ca. 850–1050 C.E.), followed by generally cooler ‘Little Ice Age’ conditions (ca. 1350–1880 C.E.) and 20th century warming up to the present time. Since 1990, average temperature has exceeded past warm epochs of comparable duration, but it is not statistically unprecedented. Superposed epoch analysis reveals a volcanic forcing signal in the East Asia summer temperature reconstruction, resulting in pulses of cooler summer conditions that may persist for several years. Substantial uncertainties remain, however, particularly at lower frequencies, thus requiring caution and scientific prudence in the interpretation of this record.     

SHRIMP U–Pb zircon dating of quartz-bearing eclogite from the Sanbagawa Belt, south-west Japan: implications for metamorphic evolution of subducted protolith

In order to decipher the origin of eclogite in the high‐P/T Sanbagawa metamorphic belt, SHRIMP U–Pb ages of zircons from quartz‐bearing eclogite and associated quartz‐rich rock (metasandstone) were determined. One zircon core of the quartz‐rich rock yields an extremely old provenance age of 1899 ± 79 Ma, suggesting that the core is of detrital origin. Eight other core ages are in the 148–134 Ma range, and are older than the estimated age for trench sedimentation as indicated by the youngest radiolarian fossil age of 139–135 Ma from the Sanbagawa schists. Ages of metamorphic zircon rims (132–112 Ma) from the quartz‐rich rock are consistent with metamorphic zircon ages from the quartz‐bearing eclogite, indicating that eclogite facies metamorphism peaked at 120–110 Ma. These new data are consistent with both the Iratsu eclogite body and surrounding highest‐grade Sanbagawa schists undergoing coeval subduction‐zone metamorphism, and subsequent re‐equilibration under epidote amphibolite facies conditions during exhumation.     

The Japan Sea Intermediate Water; Its Characteristics and Circulation

In the southern Japan Sea there is a salinity minimum layer between the Tsushima Current Water and the Japan Sea Proper Water. Since the salinity minimum corresponds to the North Pacific Intermediate Water, it is named the Japan Sea Intermediate Water (JIW). To examine the source and circulation of JIW, the basin-wide salinity minimum distribution was investigated on the basis of hydrographic data obtained in 1969. The young JIW, showing the highest oxygen concentration and the lowest salinity, is seen in the southwestern Japan Sea west of 133°E, while another JIW with lower oxygen and higher salinity occupies the southeastern Japan Sea south of the subpolar front. Since the young JIW shows high oxygen concentrations, high temperatures and low densities, the source of the water is probably in the surface layer. It is inferred that the most probable region of subduction is the subarctic front west of 132°E with the highest oxygen and the lowest salinity at shallow salinity minimum. In addition, property distributions suggest that JIW takes two flow paths: a eastward flow along the subarctic front and an southward flow toward the Ulleung Basin. On the other hand, a different salinity minimum from JIW occupies the northern Japan Sea north of the subarctic front, which shows an apparently higher salinity and high oxygen concentration than JIW. However, this salinity minimum is considered not to be a water mass but to be a boundary between overlying and underlying water masses. This revised version was published online in August 2006 with corrections to the Cover Date.     

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.     

Temperature measurements of electrostatic shocks in?laser-produced counter-streaming plasmas

Collisionless shocks in counter-streaming plasmas, created by the high-power laser system Gekko XII HIPER, are investigated. The shock structure and density are measured by optical diagnostics such as shadowgraphy, interferometry, and streaked interferometry. The plasma density and temperature are estimated from self-emission measurements with visible light by streaked optical pyrometer and gated optical imager. Brightness temperatures are calculated considering the efficiency of the detectors, and electron temperatures are estimated.