Photo-inhibition of phytoplankton photosynthesis as a function of exposure time

The photo-inhibition of phytoplankton photosynthesis at higher intensities was examined with a cultured marine diatom,Phaeodactylum tricornutum, and natural samples. The question was to determine whether photo-inhibition results from excretion of photosynthetic products from cell or from an actual decrease in photosynthetic rate. P. tricornutum cultured at 15 klux showed very little photo-inhibition up to 70 klux, and, in the sample cultured at 1 klux, most marked photo-inhibition was observed in 3 hours experiment. Extracellular release was less than 30% of particulate fixation, and did not show any extreme increase to supplement photosynthesis depression at higher light intensities. When the photosynthesis was measured during 10 minutes, both samples showed no photo-inhibition. The photosynthesis by low light sample lost the linearity of time-course with prolonged exposure at high light intensity. Observed photo-inhibition, therefore, we explained with the actual decrease in photosynthetic rate. Similar photo-inhibition could be seen in marine phytoplankton samples concentrated by filtration.     

Upwelling plumes in sagami bay and adjacent water around the Izu Islands,Japan

Water plumes, 20 km long or less, identified by low temperature, high salinity and high nutrient concentrations, were observed on the eastern side of Izu Islands where the Kuroshio Current or its branch flowed eastward. The T-S diagrams and the vertical profiles of oceanographic variables indicated that the water plumes resulted from the upwelling of subsurface water. A newly formed plume, characterized by a sharp temperature front and high nutrient concentrations, contained less chlorophyll than did old plumes. It is suggested that the upwelling plumes are maintained for a period long enough to allow luxuriant growth of phytoplankton.     

Experimental study of the breaking limit of multi-directional random waves passing over an impermeable submerged breakwater

This study investigates experimentally the breaking wave height of multi-directional random waves passing over an impermeable submerged breakwater. Experiments have been conducted in a three-dimensional wave basin equipped with a multi-directional random wave generator. A special type of wave gauge has been newly devised to record the water surface elevations in the breaker zone as accurately as possible. The records are analyzed to estimate the location and limit of wave breaking. Comparisons have also been made with the results of regular waves. The influence of the incident wave conditions on the breaking wave height normalized by the breakwater dimensions has been investigated. Empirical formulae have been presented to estimate the breaking limit of multi-directional random waves based on the experimental records. The formulae have been tested and found to work well not only for multi-directional random waves, but for regular waves as well.     

Evaluation of change in subsurface thermal environment due to groundwater flow in the Tokyo Lowland,Japan

Information on the distribution of subsurface temperature and hydraulic heads at 24 observation wells in and around the Tokyo Lowland, the eastern part of the Tokyo Metropolitan area, were examined to make clear the relationship between groundwater and the subsurface thermal environment in the urban area. Minimums in temperature–depth logs due to subsurface temperature increasing at shallow parts were recognized in 21 wells. This fact shows subsurface temperature is affected by ground surface warming in almost all of this area. Deeper than minimums, where the effects of surface warming became relatively small, regional variation is observed as follows: high temperatures are shown in the central part to the southern part, and low temperatures shown in the inland to eastern part. The high temperature area corresponds to an area where the lower boundary of groundwater flow is relatively shallow. This area corresponds also to an area with severe land subsidence resulting from excessive groundwater pumping. It is considered that this high temperature area is formed by the effects of upward groundwater flow affected by hydrogeological conditions and pumping. On the other hand, a comparison between past data (1956–1967) and present data (2001–2003) revealed widespread decreasing temperature in the inland area. This is explained by downward groundwater flow based on an analysis of temperature–depth logs. This fact suggests that subsurface temperature is not only increasing from the effects of surface warming but also decreasing from the effects of groundwater environment change due to pumping.     

Controlled experiment in the ionosphere with a rocket-borne plasma gun

A controlled active experiment was performed by a plasma gun on-board a rocket to study the plasma stream across the magnetic field in space. A mother and daughter system was employed. An 8 kV 0.8 μF (25 J) capacitor bank on the daughter rocket was discharged every 12 s and about 10¹⁶ ion and electron pairs were ejected. A plasma signal was detected on the electron temperature probe. The propagation speed of the plasma stream is estimated to be 10⁶ cm/s, considerably lower than that obtained in the prelaunch test. The amplitude of the plasma signal decays as the inverse square of the mutual distance between the mother and daughter rockets and this decay is much slower than the free streaming. The importance of the geomagnetic field on the plasma propagation in space is discussed.     

Recent developments in seismically isolated buildings in Japan

The Building Standard Law of Japan and related Enforcement Order and Notifications have been substantially revised since the year 2000 to introduce a performance-based regulatory and deregulation system for building control systems. Up to then, time-history analyses were mandatory for isolated buildings and had to be specially approved by the Minster of the Ministry of Construction (MOC). Simplified design procedures based on the equivalent linear method for seismically isolated buildings have been issued as “Notification 2009 — Structural calculation procedure for buildings with seismic isolation” from MOC, and are now integrated into the Ministry of Land, Infrastructure, and Transportation (MLIT). Along with Notification 2009, “Notification 1446 of year 2000 — Standard for specifications and test methods for seismic isolation devices” was also issued. Buildings with heights equal to or less than 60m and that are designed according to these Notifications, including base isolated buildings, only need approval from local building officials, and no longer require the special approval of the Minister of MLIT. This paper summarizes: 1) some statistics related to buildings with seismic isolation completed up to the end of 2001; 2) simplified design procedures required by Notification 2009 of year 2000; and 3) performance of seismic isolation devices required by Notification 1446 of year 2000.     

Process of Housing Damage Assessment: The 1995 Hanshin-Awaji Earthquake Disaster Case

Rebuilding of victims' livelihoods was a crucial issue in the restoration process in the1995 Hanshin-Awaji Earthquake Disaster. Housing damage assessment influencedmost of the rebuilding of the livelihood in the long term, because the Victim Certificatesissued by the local governments based on the results of the Housing damage assessmentwas required to receive most of the individual assistance measures. In the process ofHousing damage assessment, many complex problems arose, leading to extensivework on the part of the disaster responders. Consequently, a considerable number ofvictims were dissatisfied with the assessment and applied for a resurvey. Due to a floodof requests for resurvey, disaster responders had to work on damage assessment, leavingrelief activities aside.In order to facilitate Housing damage assessment, this paper discusses thefollowing five points: (1) the processes and the problems of assessments performedin the Hanshin-Awaji Earthquake Disaster, (2) the changes in the nature of informationneeded by the victims, (3) the improvements over the present damage assessment, (4)the housing situation in Japan, and (5) the international situation on damage assessment.It is obvious from the results that a poor damage assessment system and the size ofthe disaster produced a very large work load. Differences in appreciation among theinvestigators also contributed to unfair assessments and led to the victims beingincreasingly dissatisfied by the survey results. Finally, a design concept for acomprehensive damage assessment system, which has been derived from theabove five points, is proposed for post-disaster management.     

The effects of possible contamination by sample holders on samples to be returned by Hayabusa2

Chemical compositions of materials used for new sample holders (vertically aligned carbon nanotubes [VACNTs] and polyimide film), which were developed for the analysis of Hayabusa2‐return samples, were determined by instrumental neutron activation analysis and/or instrumental photon activation analysis, to estimate contamination effects from the sample holders. The synthetic quartz plate used for the sample holders was also analyzed. Ten elements (Na, Al, Cr, Mn, Fe, Ni, Eu, W, Au, and Th) and 14 elements (Na, Al, K, Sc, Ti, Cr, Zn, Ga, Br, Sb, La, Eu, Ir, and Au) could be detected in the VACNTs and polyimide film, respectively. The VACNT data show that contamination by this material with respect to the Murchison meteorite is negligible in terms of the elemental ratios (e.g., Fe/Mn, Na/Al, and Mn/Cr) used for the classification of meteorites due to the extremely low density of VACNTs. However, for the Au/Cr ratio, even small degrees (1.7 wt%) of contamination by VACNTs will change the Au/Cr ratio. Elemental ratios used for the classification of meteorites are only influenced by large amounts of contamination (>60 wt%) of polyimide film, which is unlikely to occur. In contrast, detectable effects on Ti isotopic compositions are caused by >0.1 and >0.3 wt% contamination by VACNTs and polyimide film, respectively, and Hf isotopic changes are caused by >0.1 wt% contamination by VACNTs. The new sample holders (VACNTs and polyimide film) are suitable for chemical classification of Hayabusa2‐return samples, because of their ease of use, applicability to multiple analytical instruments, and low contamination levels for most elements.     

Variations in turbulent energy dissipation and water column stratification at the entrance of a tidally energetic strait

We observed tidal currents, turbulent energy dissipation and water column stratification at the entrance of a narrow strait (Neko Seto) in the Seto Inland Sea, Japan, using a free-falling turbulent microstructure profiler (TurboMAP) and acoustic Doppler current profiler (ADCP). The variation in turbulent energy dissipation at the entrance of the strait was not at quarter-diurnal frequency but at semi-diurnal frequency; turbulent energy dissipation was enhanced during the ebb tide, although it was moderate during the flood tide. This result is consistent with the results of Takasugi (1993), which showed the asymmetry of tidal energy loss during a semidiurnal tidal cycle using control volume analysis. It is suggested that significant turbulent energy dissipation is generated in the strait, which influences the properties of water outside the strait when tidal currents flow out from the strait.