Origin and evolution of the Steamboat Springs siliceous sinter deposit, Nevada, U.S.A.

Siliceous hot spring deposits from Steamboat Springs, Nevada, U.S.A., record a complex interplay of multiple, changing, primary environmental conditions, fluid overprinting and diagenesis. Consequently these deposits reflect dynamic geologic and geothermal processes. Two surface sinters were examined—the high terrace, and the distal apron-slope, as well as 13.11 m (43 ft) of core material from drill hole SNLG 87-29. The high terrace sinter consists of vitreous and massive-mottled silica horizons, while the distal deposit and core comprise dominantly porous, indurated fragmental sinters. Collectively, the three sinter deposits archive a complete sequence of silica phase diagenetic minerals from opal-A to quartz. X-ray powder diffraction analyses and infrared spectroscopy of the sinters indicate that the distal apron-slope consists of opal-A and opal-A/CT mineralogy; the core yielded opal-A/CT and opal-CT with minor opal-A; and the high terrace constitutes opal-C, moganite, and quartz. Mineralogical maturation of the deposit produced alternating nano–micro–nano-sized silica particle changes. Based on filament diameters of microbial fossils preserved within the sinter, discharging thermal outflows fluctuated between low-temperatures (< 35 °C, coarse filaments) and mid-temperatures ( 35–60 °C, fine filaments). Despite transformation to quartz, primary coarse and fine filaments were preserved in the high terrace sinter. AMS ¹⁴C dating of pollen from three horizons within core SNLG 87-29, from depths of 8.13 to 8.21 m (26′8″ to 26′11″), 10.13 to 10.21 m (33′3″ to 33′6″), and 14.81 to 14.88 m (48′7″ to 48′10″), yielded dates of 8684 ± 64 years, 11,493 ± 70 years and 6283 ±60 years, respectively. In the upper section of the core, the stratigraphically out-of-sequence age likely reflects physical mixing of younger sinter with quartzose sinter fragments derived from the high terrace. Within single horizons, mineralogical and morphological components of the sinter matrix were spatially patchy. Overall, the deposit was modified by sub-surface flow of alkali-chloride thermal fluids depositing a second generation of silica, and periodically, by acidic steam condensate formed during periods when the water table was low. Local faulting produced considerable fracturing of the sinter. Hence, the Steamboat Springs sinter experienced a complex history of primary and secondary hydrothermal, geologic and diagenetic events, and their inter-relationships and effects are locked within the physical, chemical and biological signatures of the deposit.     

Blooms of the cyanobacterium Lyngbya majuscula in coastal Queensland, Australia: disparate sites, common factors

During the last decade there has been a significant rise in observations of blooms of the toxic cyanobacterium Lyngbya majuscula along the east coast of Queensland, Australia. Whether the increase in cyanobacterial abundance is a biological indicator of widespread water quality degradation or also a function of other environmental change is unknown. A bioassay approach was used to assesses the potential for runoff from various land uses to stimulate productivity of L. majuscula. In Moreton Bay, L. majuscula productivity was significantly (p<0.05) stimulated by soil extracts, which were high in phosphorus, iron and organic carbon. Productivity of L. majuscula from the Great Barrier Reef was also significantly (p<0.05) elevated by iron and phosphorus rich extracts, in this case seabird guano adjacent to the bloom site. Hence, it is possible that other L. majuscula blooms are a result of similar stimulating factors (iron, phosphorus and organic carbon), delivered through different mechanisms.     

Vertical migration ofcentropages typicus (copepoda) in Chesapeake Bay,with some thoughts on migration studies

Centropages typicus was collected at two hour intervals over a diel cycle at a station near the Chesapeake Bay mouth. The species migrated upward at dusk and downward at dawn. Neither light, temperature, salinity, nor density appeared to cue the migration. Attention is drawn to the need for information on the extent and regularity of migration by individual organisms, and how the lack of such information may lead to poor interpretations of migration data.     

Distribution of deep near-inertial waves observed in the Kuroshio Extension

The distribution of deep near-inertial waves (NIWs) is investigated using data mainly from an array of 46 near-bottom acoustic current meter sensors spanning a 600 km × 600 km region as part of the Kuroshio Extension System Study during 2004–2006. The deep NIW distribution is interpreted in the context of both upper-layer and near-bottom mapped circulations. The wintertime-mean mixed-layer NIW energy input, modeled from observed wind stress, has the same range of values north and south of the Kuroshio Extension in this region. Yet, the wintertime-mean deep NIW energy distribution reveals a sharp factor-of-5 decrease from north to south of the Kuroshio jet. This direct observational evidence shows that the Kuroshio Extension blocks the equatorward propagation of NIWs. The NIW energy that does reach the sea floor within the subset of wintertime observations in the subtropical gyre arrives with patchy spatial and temporal distribution. Elevated NIW energy in deep water is associated with anticyclones in the deep barotropic flow and unassociated with upper layer eddies.     

A Fresh Look at the Geobiology & Sedimentary Environments of the Hypersaline Great Salt Lake,USA

正1 Introduction The Great Salt Lake(GSL)is the defining hydrological feature of the Great Basin,North America’s largest desert--and it is the largest waterbody in the western USA.Despite the early(Eardley,1938)recognition of"bioherms,"algal layers,and mats covering hundreds of square km of lake area,these features have not been the     

Field Demonstration of the Horizontal Treatment Well (HRX Well®) for Passive In Situ Remediation

The horizontal reactive media treatment well (HRX Well®) uses directionally drilled horizontal wells filled with a treatment media to induce flow-focusing behavior created by the well-to-aquifer permeability contrast to passively capture proportionally large volumes of groundwater. Groundwater is treated in situ as it flows through the HRX Well and downgradient portions of the aquifer are cleaned via elution as these zones are flushed with clean water discharging from the HRX Well. The HRX Well concept is particularly well suited for sites where long-term mass discharge control is a primary performance objective. This concept is appropriate for recalcitrant and difficult-to-treat constituents, including chlorinated solvents, per- and polyfluoroalkyl substances (PFAS), 1,4-dioxane, and metals. A full-scale HRX Well was installed and operated to treat trichloroethene (TCE) with zero valent iron (ZVI). The model-predicted enhanced flow through the HRX Well (compared to the flow in and equivalent cross-sectional area orthogonal to flow in the natural formation before HRX Well installation) and treatment zone width was consistent with flows and widths estimated independently by point velocity probe (PVP) testing, HRX Well tracer testing, and observed treatment in downgradient monitoring wells. The actual average capture zone width was estimated to be between 45 and 69 feet. Total TCE mass discharge reduction was maintained through the duration of the performance monitoring period and exceeded 99.99% (%). Decreases in TCE concentrations were observed at all four downgradient monitoring wells within the treatment zone (ranging from 50 to 74% at day 436), and the first arrival of treated water was consistent with model predictions. The field demonstration confirmed the HRX Well technology is best suited for long-term mass discharge control, can be installed under active infrastructure, requires limited ongoing operation and maintenance, and has low life cycle energy and water requirements.     

Diatom-inferred depth models in 8 Canadian boreal lakes: inferred changes in the benthic:planktonic depth boundary and implications for assessment of past droughts

Assessment of past drought in boreal regions, a region predicted to be strongly affected by climate warming, can provide insights into future availability of water. However, limited instrumental data and paleoclimatic data are available for this assessment. To address this lack of data in the boreal region of northwest Ontario, a regional study of lakes in the Winnipeg River Drainage Basin was initiated. Diatom-inferred (D-I) depth models were developed based on surface samples collected along a depth gradient within 8 small boreal lakes. Weighted-averaging and modern analog approaches provided robust within-lake depth models for each of the study lakes, with bootstrapped r² values ranging from 0.90 to 0.98, and root-mean-squared-errors of prediction (RMSEP) between 1.1 and 2.5 m. Large differences in the estimated depth optima for three representative, but common diatom species across our 8 study lakes suggested that within-lake calibration datasets are more appropriate for inferring past drought based in depth models than a regional multi-lake calibration dataset, and that light and related variables are controlling factors governing the maximum depth of benthic taxa. A down-core application of the D-I depth models on a near-shore core from Meekin Lake, retrieved near the present-day ecotone between the benthic and planktonic diatom assemblages indicated highly similar trends in inferred depth (r = 0.96). The models have significant correlations with other metrics of changes in depth including diatom species richness (r = 0.74–0.78) and evenness (r = 0.76–0.8), thereby allowing a check on the strength and direction of the depth inferences down-core. Near-shore cores located near the benthic:planktonic transition is a sensitive region that can provide estimates of past droughts in lakes where such inferences have been difficult to estimate.     

Use of cartographic images by expert and novice field geologists in planning fieldwork routes

Topographic maps and aerial photographs are particularly useful when geoscientists are faced with fieldwork tasks such as selecting paths for observation, establishing sampling schemes, or defining field regions. These types of images are crucial in bedrock geologic mapping, a cognitively complex field-based problem-solving task. Geologic mapping requires the geologist to correctly identify rock types and three-dimensional bedrock structures from often partial or poor-quality outcrop data while navigating through unfamiliar terrain. This paper compares the walked routes of novice to expert geologists working in the field (n = 66) with the results of a route planning and navigation survey of a similar population of geologists (n = 77). Results show clearly that those geologists with previous mapping experience make quick and decisive determinations about field areas from available imagery and maps, regardless of whether they are or not physically present in the field area. Recognition of geologic features enabled experts to form and verbalize a specific plan for travel through a landscape based on those features. Novices were less likely to develop specific travel route plans and were less likely to identify critical landscape cues from aerial photographs.