Computerized streamflow measurement using slug injection

Using current meters to estimate flows in fast mountain streams is difficult and inaccurate. The salt dilution method offers an easier and more accurate alternative. The method has been used for many years but is time consuming and messy because of the need to mix chemical solutions and measure chemical concentrations in the field. A computer program has been developed which uses a laptop computer to calculate the mixing length and the mass of salt needed. The program controls the conductivity measurements and calculates the streamflow directly in the field. The development of this program is described and examples are presented of the application of the method in the Rocky Mountains of Alberta and British Columbia.     

Catch-quota balancing in multispecies individual fishing quotas

Individual fishery quotas (IFQs) are an increasingly prevalent form of fishery management around the world, with more than 170 species currently managed with IFQs. Yet, because of the difficulties in matching quota holdings with catches, many argue that IFQs are not appropriate for multispecies fisheries. Using on-the-ground-experience with multispecies IFQ fisheries in Iceland, New Zealand, Australia, and Canada, we assess the design and use of catch-quota balancing mechanisms. Our methodology includes a mix of interviews with fishery managers, industry representatives, and brokers, literature review, and data analysis. We find that a combination of incentives and limits on use rates for the mechanisms provide sufficient flexibility to the quota owner without the fishery manager incurring excessive levels of overexploitation risk. Contrary to some opinions, these programs are evidence that it is possible to implement IFQ programs for multispecies fisheries and that they can be profitable and sustainable.     

Geoacoustic Characterisation of Fine-grained Sediments using Single and Multiple Reflection Data

Fine-grained sediments commonly occur in areas of the continental shelf where wave and current energy are weak. Bulk density, compressional wave speed and attenuation are fundamental physical properties of these sediments required for predicting the response of the seabed for diverse branches of marine science. The traditional coring approach is time and labor-intensive, with large uncertainties associated with sediment disturbance in the sampling phase. Acoustic methods offer the advantages of remote sensing, i.e., sampling the sediment structure without mechanical disturbance and a significantly larger seabed coverage rate per unit time. Two different acoustic methods are described: one using short-range single-bounce interactions with the seabed, and the second using long-range modal propagation to infer the sediment properties. The relative strengths and sensitivities of each approach are explored through simulations guided by experience with measured data.     

Variation in the composition of Lake Bonneville marl: a potential key to lake-level fluctuations and paleoclimate

Lake Bonneville marl provides a stratigraphic record of lake history preserved in its carbonate minerals and stable isotopes. We have analyzed the marl in shallow cores taken at three localities in the Bonneville basin. Chronology for the cores is provided by dated volcanic ashes, ostracode biostratigraphy, and a distinctive lithologic unit believed to have been deposited during and immediately after the Bonneville Flood.A core taken at Monument Point at the north shore of Great Salt Lake encompasses virtually the entire Bonneville lake cycle, including the 26.5 ka Thiokol basaltic ash at the base and deposits representing the overflowing stage at the Provo shoreline at the top of the core. Two cores from the Old River Bed area near the threshold between the Sevier basin and the Great Salt Lake basin (the main body of Lake Bonneville) represent deposition from the end of the Stansbury oscillation ( 20 ka) to post-Provo time ( 13 ka), and one core from near Sunstone Knoll in the Sevier basin provides a nearly complete record of the period when Lake Bonneville flooded the Sevier basin (20–13 ka).In all cores, percent calcium carbonate, the aragonite to calcite ratio, and percent sand were measured at approximately 2-cm intervals, and ¹⁸O and ¹³C were determined in one core from the Old River Bed area. The transgressive period from about 20 ka to 15 ka is represented in all cores, but the general trends and the details of the records are different, probably as a result of water chemistry and water balance differences between the main body and the Sevier basin because they were fed by different rivers and had different hypsometries. The Old River Bed marl sections are intermediate in position and composition between the Monument Point and Sunstone Knoll sections. Variations in marl composition at the Old River Bed, which are correlated with lake-level changes, were probably caused by changes in the relative proportions of water from the two basins, which were caused by shifts in water balance in the lake.This is the second paper in a series of papers published in this issue on Climatic and Tectonic Rhythms in Lake Deposits.     

Cycle anatomy and variability in the storm-dominated type cincinnatian (Upper Ordovician): coming to grips with cycle delineation and genesis

Although parasequence and sequence are scale-independent terms, they are frequently applied only to specific scales of cycles. For example, meter-scale cycles are commonly assumed to be parasequences or PACs. In the Upper Ordovician Kope and Fairview Formations of northern Kentucky, we examined a succession of 50 meter-scale cycles that have been variously interpreted as deepening-upward, shallowing-upward, or showing no relationship with water depth. Our analysis shows that these cycles, characterized by shifts in storm-bed proximality, are highly variable in their thickness and internal construction. Most cycles are best considered high-frequency sequences, because deepening-upward intervals are common, and many cycles contain evidence of abrupt basinward shifts in facies as expected at sequence boundaries. A minority fit the parasequence model of shallowing-upward cycles bounded by flooding surfaces. Larger, 20 m scale cycles are defined by systematic thickening and thinning trends of meter-scale cycles. However, meter-scale cycles do not display any systematic trends in cycle anatomy as a function of position within the 20 m cycles or position within the Kope and Fairview Formations. The high cycle variability and the lack of systematic stratigraphic organization with respect to longer-term cyclicity reflect either the irregularity of relative sea-level changes, the poor recording of sea-level changes in this deep-water setting, or the generation of these cycles by climate-induced cyclicity in storm intensity. These three mechanisms would generate similar patterns at the outcrop scale, so it is not possible at the present to distinguish between them.     

On the bogussing of tropical cyclones in numerical models: A comparison of vortex profiles

Summary At the resolutions currently in use, and with the sparse oceanic data coverage, numerical analyses cannot adequately represent tropical cyclone circulations for use in numerical weather prediction models. In many cases there is no circulation present at all. Most numerical weather prediction centers therefore employ a bogussing scheme to force a tropical cyclone vortex into the numerical analysis. The standard procedure is to define a synthetic data distribution based on an analytically prescribed vortex, which is passed to the analysis scheme as a set of high quality observations.In this study, four commonly used bogus vortices are examined by comparing resultant forecast tracks in an environment at rest, and in a background flow that simulates a typical monsoon trough-subtropical ridge structure. There are three main findings, each of which has significance for operational tropical cyclone track prediction. First, great care is needed in the choice of the characteristics of the bogus vortex, such as the radius and magnitude of the maximum wind. Second, the tropical cyclone trajectories can be very sensitive to their initial position in the idealised environment. Third, the bogus vortex can substantially influence the environment, especially over longer time periods and for vortices of larger size.With 9 Figures     

Mechanisms of shrubland expansion: land use,climate or CO2?

Encroachment of trees and shrubs into grasslands and the thicketization of savannas has occurred worldwide over the past century. These changes in vegetation structure are potentially relevant to climatic change as they may be indicative of historical shifts in climate and as they may influence biophysical aspects of land surface-atmosphere interactions and alter carbon and nitrogen cycles. Traditional explanations offered to account for the historic displacement of grasses by woody plants in many arid and semi-arid ecosystems have centered around changes in climatic, livestock grazing and fire regimes. More recently, it has been suggested that the increase in atmospheric CO₂ since the industrial revolution has been the driving force. In this paper we evaluate the CO₂ enrichment hypotheses and argue that historic, positive correlations between woody plant expansion and atmospheric CO₂ are not cause and effect.Please direct all correspondence to the senior author.     

Chemical exchange during hydrothermal alteration of basalt by seawater—I. Experimental results for major and minor components of seawater

Fresh mid-ocean ridge basalt of varying crystallinity has been powdered and reacted with seawater and an artificial Na-K-Ca-Cl solution at 200–500°C and 500–1000 bar in sealed gold capsules. Water/rock mass ratios of 1–3 were used and durations ranged from 2 to 20 months.These time periods were sufficient for most elements to approach a steady-state concentration in solution which was determined by equilibrium with alteration minerals (Mg, SiO₂, SO₄), by rate of formation of these minerals (Na, Ca), or by depletion from the rock (K, B, Ba). The resulting solutions closely resemble the brines from the basalt-seawater geothermal system at Reykjanes, Iceland. Mg was almost completely removed from seawater into the alteration products smectite, tremolite-actinolite, or talc. Sulfate also was removed to low concentrations, both by precipitation of anyhydrite and by reduction to sulfide. Net transfer of Na from seawater into solids occurred in most experiments by formation of sodic feldspar and possibly analcime. Sr was removed from seawater in some experiments but showed no change or a small gain in others. SiO₂, Ca, K, Ba, B and CO₂ were leached from basalt and enriched in solution. SiO₂ concentrations were controlled by saturation with quartz at 300°C and above. The principal Ca-bearing phases which formed were anhydrite, the hydrated Ca-silicate truscottite, tremolite-actinolite, and possibly wairakite. No K-rich phases formed. For some minerals the crystallinity of the starting basalt affected the amount which formed.Removal of Mg from seawater into solid alteration products occurred rapidly and was balanced largely by leaching of Ca from basalt. Net transfer of Na from seawater into solids occurred more slowly and was balanced mainly by leaching of additional Ca from basalt. Thus, reaction between seawater and basalt at low water/rock ratios can be considered to consist of two exchanges: Mg for Ca, and Na for Ca.