Small hypervelocity particles captured in aerogel collectors: Location,extraction, handling and storage

Abstract— It has now been about a decade since the first demonstrations that hypervelocity particles could be captured, partially intact, in aerogel collectors. But the initial promise of a bonanza of partially‐intact extraterrestrial particles, collected in space, has yet to materialize. One of the difficulties that investigators have encountered is that the location, extraction, handling and analysis of very small (10 μm and less) grains, which constitute the vast majority of the captured particles, is challenging and burdensome. Furthermore, current extraction techniques tend to be destructive over large areas of the collectors. Here we describe our efforts to alleviate some of these difficulties. We have learned how to rapidly and efficiently locate captured particles in aerogel collectors, using an automated microscopic scanning system originally developed for experimental nuclear astrophysics. We have learned how to precisely excavate small access tunnels and trenches using an automated micromanipulator and glass microneedles as tools. These excavations are only destructive to the collector in a very small area—this feature may be particularly important for excavations in the precious Stardust collectors. Using actuatable silicon microtweezers, we have learned how to extract and store “naked” particles—essentially free of aerogel—as small as 3 μm in size. We have also developed a technique for extracting particles, along with their terminal tracks, still embedded in small cubical aerogel blocks. We have developed a novel method for storing very small particles in etched nuclear tracks. We have applied these techniques to the extraction and storage of grains captured in aerogel collectors (Particle Impact Experiment, Orbital Debris Collector Experiment, Comet‐99) in low Earth orbit.     

Fracture sealing of quartzite under a temperature gradient: experimental results

Veined lithologies are formed by fracturing and sealing processes, with the veins representing former fluid conduits through the rock. Although detailed fieldwork and numerical simulations have provided a better understanding of vein growth, few studies have attempted to seal fractures and generate veins experimentally. In this pilot study, we subjected fractured quartzite to temperature gradients of 45–125 °C under hydrothermal conditions in a static fluid, with the aim of precipitating secondary quartz in the cooler portions of the fracture. Results show that secondary quartz precipitates due to the imposed temperature gradient, causing the initial fracture to seal locally. Although no systematic sealing pattern was observed along the fracture, samples subjected to higher temperatures exhibit a smaller fracture width and appear to have reacted more extensively. Electron microprobe mapping visualizes the spatial distribution of secondary quartz, which contains elevated concentrations of aluminium.     

QUEST on DASI: a South Pole CMB polarization experiment

QUEST on DASI is a ground-based, high-sensitivity, high-resolution (ℓ_max2500) experiment designed to map CMB polarization at 100 and 150 GHz and to measure the power spectra from E-modes, B-modes from lensing of the CMB, and B-modes from primordial gravitational waves. The experiment comprises a 2.6 m Cassegrain optical system, equipped with an array of 62 polarization-sensitive bolometers (PSBs), located at the South Pole. The instrument is designed to minimize systematic effects; features include differencing of pairs of orthogonal PSBs within a single feed, a rotatable achromatic waveplate, and axisymmetric rotatable optics. In addition the South Pole location allows both repeatable and highly controlled observations. QUEST on DASI will commence operation in early 2005.     

Proton Irradiation of Centaur,Kuiper Belt,and Oort Cloud Objects at Plasma to Cosmic Ray Energy

Times for accumulation of chemically significant dosages on icy surfaces of Centaur, Kuiper Belt, and Oort Cloud objects from plasma and energetic ions depend on irradiation position within or outside the heliosphere. Principal irradiation components include solar wind plasma ions, pickup ions from solar UV ionization of interstellar neutral gas, energetic ions accelerated by solar and interplanetary shocks, including the putative solar wind termination shock, and galactic cosmic ray ions from the Local Interstellar Medium (LISM). We present model flux spectra derived from spacecraft data and models for eV to GeV protons at 40 AU, a termination shock position at 85 AU, and in the LISM. Times in years to accumulate dosages ～100 eV per molecule are computed from the spectra as functions of sensible surface depth less than one centimeter at unit density.The collisional resurfacing model of Luu and Jewitt is reconsidered in thecontext of depth-dependent dosage rates from plasma, suprathermal,and higher energy protons, and global exposure, by micrometeoroiddust grain impacts, of moderately irradiated red material below athin crust of heavily irradiated neutral material. This material should be more visible on dynamically `cold’ objects in the ～40 AU region.     

Models of aggradation versus progradation in the Himalayan Foreland

A frequent goal of decompaction analysis is to reconstruct histories of basin subsidence and tectonic loading. In marine environments, eustatic and paleobathymetric uncertainties limit the resolution of these reconstructions. Whereas in the terrestrial basins, these ambiguities are absent, it is still necessary to account for depositional slopes between localities in order to analyze three-dimensional patterns of subsidence. We define two end-members for depositional surfaces: aggradation and progradation. The relative importance of either end-member is a function of the interplay between the rate of net sediment accumulation and the rate of basin subsidence. The models predict the patterns of major drainages (transverse versus longitudinal) and the way in which provenance should be reflected within different portions of a basin. Consequently, paleocurrent and provenance data from the ancient stratigraphic record can be used to distinguish between these endmembers. The subhorizontal depositional surfaces that dominate during times of aggradation provide a well defined reference frame for regional analysis of decompacted stratigraphies and related subsidence. Depositional slopes during progradation can not be as precisely specified, and consequently yield greater uncertainties in reconstructions of subsidence. These models are applied to the Mio-Pliocene foreland basin of the northwestern Himalaya, where sequences of isochronous strata have been analyzed throughout the basin. These time-controlled data delineate a distinctive evolution from largely aggradational to largely progradational depositional geometries as deformation progressively encroaches on the foreland. Such a reconstruction of past depositional surfaces provides a well constrained reference frame for subsequent integration of subsidence histories from throughout the foreland.

---

Zusammenfassung Ein häufiges Ziel der Dekompaktionsanalyse ist es die Beckenabsenkung und die tektonische Belastung zu rekonstruieren. In marinen Ablagerungsräumen limitieren eustatische und paläobathymetrische Unsicherheiten die Auflösung der Rekonstruktion. Bei terrestrischen Becken fehlen diese Zweideutigkeiten; es ist aber trotzdem notwendig, Rechenschaft über den Ablagerungshang zwischen verschiedenen Lokalitäten abzulegen, um dreidimensionale Subsidenzmuster zu analysieren. Wir definieren zwei Endglieder von Ablagerangsflächen: Aggradation und Progradation. Die relative Wichtigkeit des jeweiligen Endglieds ist eine Funktion des Zusammenspiels zwischen der Nettorate der Sedimentakkumulation und der Beckensubsidenz. Die Modelle sagen die Hauptentwässerungsmuster (quer- oder längsverlaufend) vorher, sowie den Weg in dem die Sedimentherkunft innerhalb verschiedener Bereiche des Beckens berücksichtigt werden sollte. Folglich können Paläoströmungs- und Herkunftsdaten alter stratigraphischer Überlieferungen benutzt werden, um zwischen den Endgliedern zu unterscheiden. Die subhorizontale Ablagerungsfläche welche zur Zeit der Aggradation dominant ist, liefert einen gut definierten Referenzrahmen für die regionale Analyse von dekomprimierten Formationen und der damit verknüpften Subsidenz. Ablagerangshänge während Progradation können nicht präzise spezifiziert werden und beinhalten daher größere Unsicherheiten bei der Rekonstruktion der Subsidenz. Diese Modelle wurden übertragen auf das miozäne bis pliozäne Vorgebirgsbecken des nordwestlichen Himalayas, wo Sequenzen von isochronen Schichten durch das gesamte Becken analysiert werden konnten. Diese zeitkontrollierten Daten schildern eine ganz bestimmte Entwicklung, die von einer hauptsächlich aggradierenden zu einer progradierenden Ablagerangsgeometrie verlief, während der die Deformation schrittweise in Richtung Vorland übergriff. Diese Rekonstruktion von ehemaligen Ablagerangsflächen liefert einen guten Referenzrahmen für die folgende Integration der Subsidenzgeschichte des gesamten Vorlands.

---

Résumé L'analyse de décompaction a souvent pour but de reconstituer l'histoire de la subsidence d'un bassin et de la charge tectonique. Dans les milieux marins, de telles reconstitutions sont limitées par des incertitudes de caractère eustatique et paléobathymétrique. Par contre, ces ambiguïtés ne se présentent pas dans le cas des bassins continentaux, où il convient néanmoins de tenir compte de la pente de la surface de dépôt entre les divers points considérés pour établir un schéma tridimensionnel de la subsidence. Nous définissons deux situations extrêmes pour les surfaces de dépôt: l'aggradation et la progradation. L'importance relative de ces deux extrêmes est fonction de l'interaction entre le taux d'accumulation net des sédiments et le taux de subsidence du bassin. Les modèles prévoient la répartition des drainages principaux (transverse ou longitudinal) et la manière dont l'origine des sédiments peut se répercuter dans les diverses parties d'un bassin. Il en résulte que des informations fournies par les relevés stratigraphiques à propos des paléocourants et de la source des sédiments peuvent être utilisées pour faire la distinction entre les deux cas extrêmes. Les surfaces de dépôt subhorizontales, qui prédominent pendant les périodes d'aggradation, fournissent un bon cadre de référence pour les analyses régionales de formations décompactées et de la subsidence qui leur est associée. Les surfaces de dépôt inclinées qui se présentent au cours des progradations ne peuvent pas être définies de manière aussi précise et engendrent par conséquent plus d'incertitude dans la reconstitution de la subsidence. Les auteurs appliquent ces modèles au bassin mio-pliocène d'avant-pays de l'Himalaya nord-occidental, dans lequel des séquences de couches isochrones ont été suivies à travers tout le bassin. Ces données, chronologiquement définies, fournissent l'image d'une évolution nette, depuis des géométries typiques d'aggradation jusqu' à des géométries typiques de progradation, au fur et à mesure de l'emprise progressive de la déformation sur l'avant-pays. Une telle reconstitution des surfaces de dépôt anciennes fournit un bon cadre de référence en vue de l'intégration ultérieure de l'histoire de la subsidence dans l'ensemble de l'avant-pays.

---

. . ; , , . « » « ». . , , . , , , . , , . , . , . , , . .